Відео

Thanks for the tip I got mine to now work thought it was goin to be something else major

soooo buy a coolant burp kit. thanks I would have never thought of that

Moore Brian Hernandez Eric Miller Patricia

Made in china might not mean they are fake ngk’s, but it does mean they are junk ngk’s. Just like the people themselves that make them. Pure junk.

I have a 2012 Scrambler and the stock exhaust seems quite loud. It pops a fair amount when coming off the gas and sounds aggressive, but I would enjoy less noise…did he VW pipes qualitatively sound more quiet?

great video but keep in mind the nissan uses the blue coolant, the green coolant is for american cars , wrong coolant can eat away at your gaskets seals causing leaks over time

This video is a joke. If it’s made for the Chinese market surely a lot of people in china drive cars so are all those cars broken down. I don’t think so. Just put them in your car and use them. Don’t expect mega miles just change them earlier. No big deal. Everything is Chinese these days no big deal.

Do you ever open the bleeder valve near the heater core and firewall?

Hey brother, thanks for sharing your experience. The market is saturated with so many chinese goods that are fakes or could be OEMs. It's so hard to distinguish what and what's not. I have gotten burned with a set of mopar lifters and rockers for the 3.7 pentastar from eBay. In your case, the plugs might be original just built for the chinese market. I would give it a try and post the outcome. Again, thanks for sharing.

What color does the 4.0 take green or blue

I just installed my Denson plugs from China. They sure are different than the US and cheaper

Is this allowed?? Police will get you out here in Germany:-/ good sound though.

NGK parts made in china appear inferior quality, purchased plug wires for '98 Camry. lasted 2 years before throwing a 1310 code for coil and flashing CHK light for excess unburnt fuel and po304, purchased an NGK coil made in china likely with same results

GO TO TEMO LMFAO

not only spark plugs are fake on Amazon. there alot more products that are fake. I got a fake weed killer

Hola dónde los compraste y cuál es la referencia de las gomas de Triumph?

stopped buying from amazon and ebay important parts, lots of fakes

What brand is that funnel kit you used? I keep buying some off Amazon and they just spill out the adapter...

If ngk have a plant in China producing spark plugs , and these plugs are stating ngk ....made in China there is no fake about it , they are genuine ngk , my spark plugs say ngk , Japan, ....followed by , .....produced in Thailand, so because ngk made them in Thailand. does that make them fake ????????

Hi handsome, check the ohms.

Do you have to add water to the antifreez????

I did excitedly exactly this, my rear heater is not that hot at all

How long do you let it cool down for? I know the system not pressurized but just curious

I’ve been looking for those wire mesh tips for the exhaust, by any chance do you know the model for them? I am doing the same thing with my exhaust and that wire mesh just peeled off, pretty old i’m guessing.

What vw pipes did you buy

Obviously not a fake but just gray market. No big deal except that you overpaid.

if its a fake NGK plug they won't say its made in China. The fake would used Made in Japan instead...the fact that it is boldly printed on the box as Made in China then it is made by NGK China...Those who sell fakes would never print Made in China on the boxes or the products

Just use a OHM meter and will show you if they are rear or not. Cheap FAKE Chinese's plugs are not worth risking putting into your engine. Pay full price from a LEGAL distributor and have a peace of mind.. ua-cam.com/video/vpH4O14EBxA/v-deo.html

My friend has had these VW tips in his Scrambler for years. Sounds fricking amazing live and it also looks like stock motorcycle. Hell this is how the Scrambler should have looked like right out of the factory instead of with that heavy hunk of junk exhaust it came by default. That said while technically you should not need a remap with just an exhaust change you are still leaving some performance on the table if you do not do it. At the very least TOR map is recommended.

Just test the resistance... Chinese are not consistent,

Probably need to change your title then. You dont know they are fake, so why discredit amazon?

NGK spark plugs are very poor plugs fake or not, when GM got out of the spark plug business, we, in the racing industry had one hell of a time finding plugs that would fire our very high compression engines beyond 7,000 rpm's, lower compression, below 12-1 not so bad, then Champion brought their manufacture back to USA, reworked em, we have Champion iridium in everything now, you can't make them misfire, I think they are better than the old GM AC Delco's, try em, you will never go back.

If the spark plug works, then it works. No point in going through all the hassle of returning the spark plugs. I bought a Chinese made $32 MAF sensor for my Rav4 and the MAF worked perfectly fine. If I were to buy the same MAF from the local parts store I would be looking at at least $150. Buying online is much cheaper than buying at the local auto-parts store but just like anything else one has to look at the reviews and take their chances. The spark plugs do look legit and I wouldn't hesitate using those plugs in my car. It's way to difficult to fake a spark plug and make the plug look identical to the original. Cheap things are easily faked but the process to fake a brand name spark plug is way too difficult. What probably happened is that you bought stock made for the Asian market instead of the North American market, which is the most likely answer to everything you discussed here in your video.... BTW ~ Some things are ONLY made for the Asian market and are much better quality than anything made here in N.A. Great video though....!

Dood thanks. You nail it in 4 minutes. I've been trying to help someone through this problem remotely and haven't found clear direct info as good as this anywhere till now. Props! This is a lifesaver!

Bruh.. 😂 both are original! Made in China doesn’t mean fake.😂

Good idea 👍

Thanks so much, this video helped me a lot to burp the air my engine had, after following the steps, no more overheating, thanks again for taking the time to show us.

U don’t use the plug thing?

this make the China doughtfull for his every product

Does this process go for the 2014 Pathfinder? I was asking because eome say 50/50 Prestone & some say blue coolant for Asian vehicles.

Thank you for posting. Hope the kids learned a lot.

I'm always skeptical of chinese amazon trash. Thanks for the video.

The kids make it

I want to change the antifreeze on my 2006 Nissan Pathfinder, but can I change to the blue antifreeze that modern Nissan vehicles use?

This is helping me so freaking much thank youuuu.

Where did your purchase the burping kit or who makes it?I bought one from advance auto parts&the radiator cap adapter didn't seal properly.. Thanks

Here's the deal. They're fake. They might be sellable in other markets than ours but it's more likely they're just cheap counterfeit plugs. Really hard to tell right? Here's some ways I've figured out how to tell. Can't go by the boxes or the print/font BUT if u can confirm any of the following then go back at the end and see if there's anything else that sticks out. Stuff gets reboxed at ALL the parts stores in usa. 1. Weight them . They need to all be identical in weight and have a less than 10% tolerance for defect. If they come in a set of 4 (they'll only ever come in sets of 4 or individual, never 10. But expect them all to be identical. .2-.4g tolerance. E.g. plug weights 48.5g, the new ones better way no less then 48.1 and no more then 48.9. among the set though, they should be identical 2. Venier Calipers. Same deal. Measure , check thread pitch (maybe on a lug nut with correct thread pitch) the Chinese ones are always off on the thread pitch. 3. Magnifying glass. Compare the tips and Laser welds. Look for rust of scratches or unclean finish in the engravings etc. 4. With platinum or iridium plugs if you have a MAGNET neodim, hold it close to each side of the spark plug electrode and tip. There's might be noticable more magnetic pull toward the fakes , but this was hard to tell by touch. 5. Use a magnetic sensor on a flagship Android phone and download Dev Check, it'll show u sensors there including one for Magnetic Field. Pretty coool cause you can find the sensor in your screen by looking at it (measure with a spark plug too) and you'll see the microTeslas are measurable higher with the fakes. The precious metals have little effect on on the magnetic sensor. I found this to be true any time I've checked. Can use this sensor to measure coil packs too, anything with a magnetic field, which is all matter ... --talked to an expert once and he said they send them on for xray scanning . I forget the term for it but that's how they decide when it's too hard to tell.

Test output?

Even if they are manufactured in NGK China plant, they should not be sold in the US market. They are intended for China market only. YES BUT IT DEFINITEL COULD BE SOLD IN USA

Does this translate to a 2007 Nissan Xterra