Відео

are you using static ip or dynamic ip from the ISP?

yea, if you can get truenas installed on the raspberry pi and attach external hard drives to the USB ports of the pi, you can use it as a NAS as well.

I have not tried on pi 4 yet, but once I do i will submit that video here.

aap dusro ko bhi is course ke bare mei batain, to un subko faida ho sake ye course dekh ker 🙂

yes its possible. You can have huawei router as a gateway/router and plug fortigate firewall to it. However, it is not something recommended because fortigate is a security device, if you are planning to use it for securing your network, you want that to be your primary gateway, not huawei. You could setup huawei as a bridge mode which will pass all the routes to fortigate without interfering with any security. However, I am not sure if huawei has a feature to enable bridge mode. You will have to check that under huawei router.

How to solve invalid certificate authority issue?​@@loyaltechsecurity

I just tried the link again, it seems to be working fine. It initially asks you if you want to leave youtube and go to another site. At that point you have to leave youtube and it will take you to google drive. I tried multiple times from different browser and it seems to be bringing the file download option fine. Please double check and try different browser perhaps?

watch the video from 11:44, it explains about Red and Green interfaces.

you can try vga to hdmi converter, thats what I have been doing with few of my other raspberry pi's and it works.

make sure your QNAP cloud access is enabled and registered on QNAP cloud website.

in this all one there is only on ssd or hdd slot

it really depends on how much you are willing to spend. You can use pfsense firewall on your computer. Make computer standalone firewall as well. It will be faster than raspberry pi (depending on the configs of the PC), but generally turning a computer into a Gateway/Firewall is possible and faster. Downside is, takes more energy, more space etc.

@@loyaltechsecurity I have rpi 5 but ipfire does not support it ... sigh!!

You can set blue interface for anything you like, but just remember what IP subnet you set it to. In order for that interface to work, you will need to add a switch connecting to that blue interface. However, you will not be able to go more than 1Gbit link connection as the max speed supported by raspberry pi and usb lan adapter is 1Gbit/s speed. Hope that helps.

if you want updated AV, IPS, DNS, Webfilter and other UTM features, then Fortigate does charge yearly fee for those services. The fee depends on the type of model you have. If you dont renew these UTM services, the fortigate will NOT stop working, you just wont have latest UTM updates which will only protect you against the threats you have old signatures for in your fortigate. All new and zero day attacks will not be blocked. Hope that answers your question.

​@@loyaltechsecuritypfsense combined with in lan RouterOS and Snort = free cyber security appliance? Is Firewalla worth it? No yearly subscription.

@@loyaltechsecurity Isn't it true that to even download firmware updates, you have to pay some sort of yearly fee. Maybe a small fee?

you can use ports as vlans, as long as you assign them proper subnets.

yes it can do DNS routing as long as you have some DNS IP's set in the ipfire. You can use opendns.com FREE dns security as well.

Did you manage to find out? 😂😂

Yes this would work, on top of that you can also segment your network using the same topology. Meaning, 16 port switch can have a different vlan/subnet, 8 port switch can have different vlan/subnet and so on.

@loyaltechsecurity it's funny that you mentioned this... I was just thinking about that. :)

you can make ipfire your gateway and pass security through it. Connect another router under the ipfire which hands out the DHCP IP's and routing for your internal device. That way, you would have ipfire as a firewall and another router of your choice would make the internal routing calls.

@@loyaltechsecurity Any different configuration is this case?

Albert are you using the image from ipfire.com website or the one provided in the video link for this Pi 4?

try sd cards

could you check if the drives are formatted properly. Also, are you able to submit an image of the error you are seeing?

not necessarily because the SSD does not generate that much heat. We are using the computer since the replacement without any heat issues.

@@loyaltechsecurity Thanks for the answer, but… I was asking about the iMac and ssd 😬😆

Hi Abelamengual3028, I did realize after posting the reply to you since I was getting so many questions related to IPfire firewall. But I did correct the response and updated the reply. Hope that helps 🙂

at the time of assigning interfaces, make sure you are assigning green and red interfaces correctly. You can also check by typing ifconfig to see if your interface is showing there.

this is actually raspberry pi 3. I would definitely recommend using 4, which has higher processor and memory. Raspberry pi 3 and/or 4 should be more than enough for 2-3 computers.

could you confirm if you etched using balena etcher or another software? i was getting similar issue when i tried different etcher. Also, is there an error message you are getting which you can post?

@@loyaltechsecurity Yep, I used Balena Etcher as you did. Didn't display any error - Do you know if it logs something that we can explore the root cause? Thanks a million

double check the flashing of the sd card and make sure its done properly. If the problem persists, try a different sd card. If the flashing is done correctly, the system will boot up, assuming you are using raspberry pi 3 or above.

ipfire does not have official updates for arm which can be used on raspberry pi anymore. You can check out their download section at www.ipfire.org/download/ipfire-2.27-core178 but the google link I have posted in the description will give you the arm version for raspberry pi and once installed, i believe it has 1 more update which can be installed directly on the ipfire.

@@loyaltechsecurity perfect, thank you!

Quick Reboot of the SMB Server resets changes you made, and or make during your setup process.

Nice video. I have done similar. I was trying to replace my Server PC, that also hosted Windows Media Server. TrueNAS is not quite there for a VM Server replacement. As of right now the TrueNAS is my Media, File, and Game share.

Usually its not a best practice to have multiple routers on the same network unless you are segmenting them out and natting them. In your case, if you are only looking for a wireless device to be implemented with the IPfire, then having Asus Router under AP mode is preferred.

@@loyaltechsecurity what i wanted is to put the red thing on my isp then put the green thing to wan connection on my asus router but I wanted it to remain as dhcp server or in router mode because i used it as wireguard client. Is that possible with ipfire in the middle of that?

If you connect red port to your ISP and green port on IPfire to Asus WAN port, then your Asus router will receive RF1918 subnet, whichever your ipfire is set to give out via the green port. This setup is doable but make sure the traffic can passthrough from IPfire to your Asus router. Make sure the routing is set properly and firewall rules are allowing Asus router to communicate outbound from the ipfire.

@@loyaltechsecurity Which device is going to allocate local IPs? Currently the local router (TP LINK AX 1800 in my case) allocates those. May I set IPFIRE just to be fire wall and not be involved in IP allocation?

No I didn't have any issues installing the TrueNAS to run from the usb stick. I used USB3.0 which loads the OS faster than the old hard drives I am using.

Yes, it seems like they have stopped arm versions of this IPfire, that is why I provided a link to the last stable version of ipfire arm to be installed on raspberry pi. Hopefully they will come with arm version of IPfire soon to be installed on raspberry pi but as of right now this is the last stable version I have. Once you install this, it does allow you to update to the version until they discontinued.

Yes, I can make a video which allows you to access the NAS publicly from anywhere in the world. I will post a link once the video is created. Make sure to subscribe and hit the bell notification icon so you are notified once I upload the video. Thank you.

I will try to make a video of how to setup Qnap NAS one of these days.

here is the video for Qnap NAS you were looking for. ua-cam.com/video/Vfbi-okYHe4/v-deo.html