Відео

So I have a question how do you turn on the laser? I just bought a new TS2 and I’m trying to learn it as well. it’s also the same program. Light burn.

hi i am having trouble burning on grained bamboo with the qr code, it wont scan off the bamboo, any ideas

Another subscriber, congratulations on the channel

HI Steve. When you do the last burn and set it to fill, what combination do you use? I’ve tried having all set to fill and some set to fill with others set to line and none of them work like yours did on the video.

its been two years now bud, you ever trace the problem? i have had similar issues when turning on my air assist. and now i have unexpected laser disconnect messages while in the middle of engraving

I am going to give it a try ❤🎉😂

should have used an electric coffee table lift. Good stuff though.

Hey cool. Thanks. Question if you don't mind. I got the same diode. What are you setting the focus at ? I can't seem to dial it in. Was told 29mm from the lens to material top, then told 50 mm from bottom of the heat sink. Thanks.

Nice build 22:47 l

i think leave it and maybe drill the center hole bigger to make it look even more like a real album Preston

I've ruined numerous projects because my burn failed prior to completing. I find this situation extremely interesting in that everyone is thanking Ortur for making a video about how to fix a failed equipment design. This problem does occur with other laser etchers as well and what each of those manufacturers should have done is to provide a wiring harness to each owner along with instructions on how to install it.

So basically soend $700 on a peice of equipment and this has to be done by the consumer????

question do you use water to clean the cork after the engraving is done i just did my first engraving on cork and when i rubbed my finger on it the black stuff spread out a little i washed it with water will ee after it dries is there another method that you use? thanks in advance cheers

How do you keep the bottle and cups from moving around?

Excellent video

Geaux Saints. Thanks!

What about focal length of the laser. Does that matter in the proces?

I have different problem. Mine randomly says com port is busy yet laser dsn't move

Re the smell. I put small holes in the front of my enclosure and the fan in the back. Fan mounted just outside the box. Creates a draft like a fireplace. Mine is in a spare room and we never smelled it as it ran

Really nice lift idea. I am down because mine was doing the same that I saw yours doing in a previous video. Which part ended up being your power issue? The power supply the motherboard or? You said Ortur was sending you parts. My laser is only 3 mos old and doing the same. Its been 2 weeks and Ive not heard anything back as of yet

Which laser engraver is better, this one or COMGROW?

I kinda like the weathered look.. a little more believable..

Maybe I missed it but are the prints done on color laser or inkjet? Good to see you back, thanks for the video!

Thanks for the video! My opinion is to never coat a “coaster” that should absorb water drops from a glass. ‘Coasters” that are coated are just mini trivets to me. Just my 2 cents worth. ;).

Suggestion: by drilling those two holes, why not just put the same size drill bit into the holes when you're ready to align the piece. Then, for added stability, so it doesn't move, you can put a small strip of tape on each end, then remove the drill bits.

I'd like to see the finished cabinet complete with the lift. How's it working for you? Looks like it fits the bill.

good

Most excellent work!

This time I will do it manually with the help of Stodoys designs.

Awesome bike in your intro! I wanna say road king but your gauges are throwing me off.

Really cool man! If you clear coat it, any moisture is going to roll right off.

Your bricks need a "let glue dry" painted on them ;-)

instead of epoxy try painting glass on the backside and etch off the paint with your new laser and then paint a different color Have your laser set to etch reverse so when you flip the glass over it will be super glossy and have the same effect as the epoxy keep'em coming Regards Rick

This is the only video where the end products actually looks very good with this laser. I see a lot of people reviewing this laser and then show a garbage end product. Never knew if it was them or the laser itself. Finally....someone makes a nice final product with this laswer...now I know it can be done. Thank you!

This is not a criticism, I think when you do line art like this the words that are on top dominate the image and you loose the line art under, what I feel you need to do is add more depth to the line art by altering the drawing slightly and adding 3d depth in the drawing or if your not a 3d graphic artist then add some shading into the line art objects and give that a try, It just needs a bit more depth to bring whats underneath through a bit more. Otherwise very nice work. I use an Endurance 10 watt which has a lot more power than the Ortur, How are you finding the Ortur? Does is cut well?

Yes, step buy step would be very nice...

Hello Friend! please tell me an engraver up to $ 300. for small business, namely photo printing

Like the sign. I have just bought the Ortur and trying to find my way around it and Lightburn. How did you get it to to burn the outline of the animals and trees following the shapes? Everything I set up just burns from left to right on the x-axis and takes forever to do a simple sign.

I just got my ortur and you are about the 100th video I have watched. I noticed the box you built around it and I think that is beyond brilliant! Do you have it vented somehow?

Just out of curiousity. I watched "Edge of Tech" as well and he also mentioned focusing your laser and making sure you focal length is 75mm. So I'm not trying to bash your methods but how much success have you had doing projects without using the aforementioned focal length?

Misfit DIY's I have this problem to, do you solved this?

What about gray scale ? Is it possible with the ortur?

awesome! using up all the collectable Euro Jerry cans makes my stash more valuable. Unlike the cheap AF US 5gl stuff.😎

Looks great!

It's a really nice bowl, but now I remember why I don't have a wood lathe. 😁 Thanks for the video!

How you get the light on with you check your place on setup

Totem S 40W / NEJE Master 2S Max / Atomstack A5 Pro / Ortur Laser Master 2 pro I found the four. would like to know which one of the favorites is and which one is best for small knives, normal kitchen knives, silver key rings, zippo, silver engraved bracelet for children. thank you in advance for the help and information I will get. nice day

Could you use the laser to cut the wood through?

Nice job! How did a Minnesotan end up in Germany?

Very interesting way to make the lake map. It turned out really nice though. Thanks for the video!