Відео

Mine is doing well! My fabric came loose as well, and I just got done repairing it. I'm hoping to post a video on how I did the repairs soon.

@@RoofTopRoverOverlanding awesome. Please do. Haven't looked into it at all yet.

I just post the repair video. I hope it helps. ua-cam.com/video/KTuzSsRFGtU/v-deo.html

@RoofTopRoverOverlanding I was thinking about using gorilla fabric glue. But I'll probably go your route with the glue you used.

That may work great, too. As long as it's thin enough, the inject through a syringe needle.

On their website It's the Naturnest Sirius clamshell roof top tent XXL.

Thanks for the comment. I wanted to give it plenty of use before creating the review. I have another trip coming up in a week. I will be making the video after that trip and and hope to have it posted by the end of this month.

If you keep the stock mattress and don't add any additional padding, you could possibly store 2 "thin" sleeping bags or a couple fleece blankets in it. but that's about it. I bought a 1.25" egg crate foam pad and cut it down to size. It's difficult to close the lid with that in there. There is definitely no room for bedding if you add any additional padding. If you pull the original mattress out and do the inflatable pad, and then suck all the air out when you deflate it, you may be able to sore more bedding in it depending on how thick the pad is when it's deflated.

I had the same thing happen to mine. I contacted NaturNest about it, and apparently, they had a bad batch of glue that was used on some early ones. The more recent ones shouldn't have that problem. They sent me a repair kit to fix mine. I'm making a video on the process of how to repair it.

Great question. All the hardware (rods & brackets) were next to the ladder when originally opened. Unfortunately, the camera shot didn't turn out, so I had to redo it and forgot to put the hardware back where it was.

Thanks for watching!

It may be ok, as long as you don't mind being fairly close together and don't roll around a lot in your sleep. I'd suggest marking out a spot on the floor with the dimensions and having all 3 of you lay in that spot to see how you would all fit.

Yep, another person let me know. I already ordered it. I should have it in about a week. I needed one for winter before they offered one, so I made this one. It was a fun project.

@@RoofTopRoverOverlanding Otherwise, how is it holding up? I’m thinking about ordering one myself!

The one I made works well. I especially like having the Velcro attachment. It makes setup and teardown faster.

There is a horizontal Velcro flap vent directly above the door that has mesh behind it. It can help with ventilation but you will need to partially unzip a window to help with the flow of air.

I think they get the 63" from the overall width of the shell. But you are correct, the sleeping area is not 63" wide.

Nope. If you have the original pad with the D-Hive on top of it, it would be to thick to close the top.

Here is a video I made on weights and measures. ua-cam.com/video/EycAI07_BTE/v-deo.html

Check out my rooftop tent weight and dimensions video. ua-cam.com/video/EycAI07_BTE/v-deo.html

Unfortunately, no. Not that I'm aware of or been able to find. I'm actually in the process of making one myself. I'll post a DIY video once I have the first version done to show the process I used and the result.

They keep switching the link. I went back to check my original link, and it looks like it's sold out for now. But here's the same tent from another reseller. a.co/d/glk1slj

No worries

That is correct. You need to deflate it. I'm preparing a quick follow-up video about its performance and ractical inflation / deflation in the field.

Looking forward to seeing it.@@RoofTopRoverOverlanding

Yeah, I'm still refining it, but it's a good start. My hope is to eventually be able to mount and unmount it by myself.

Yes, it works well. I can also leave a little bit of bedding as long as it's thin.

Thanks for the heads up. Looks like they changed the link. I updated it in the video description so it should take you to the correct tent now. However they may change it again in the future.

Thanks for the heads up. It looks like the layover audio track review didn't make it to the video. I posted the review in the video description.

​@@RoofTopRoverOverlandingjust reupload.

Thanks for subscribing! Sorry, your old tent was ruined. It's a shame when an expensive piece of gear needs to be replaced. I've had this tent on a few trips but haven't spent much time in it in the rain yet, so I can't speak to that point. But for this price point, the build quality is great. No fabric issues with tears or stitches. Handles wind, just fine. It is usually me and my wife that go on trips as well and for 2 people it's about perfect size. We are getting out again this coming weekend for another trip. I will start working on a usage review after this trip. But thus far, no big issues. The only issue I've had was with the rain fly pole. The hole wasn't drilled deep enough. But it's an easy fix. I posted a video on that if you want more info. Good luck with the new setup.

I agree. It's nice to be able to leave some bedding up there when you're on a multi day trip. I found that when I deflate the mattress in the tent, I fold it in half (long way) and lay on it. With the pump running, it deflates it in about 60s. Or we deflate it just before we get out of the tent for the morning, so when we go to pack it up, it's ready to go.

What pump do you have for the paddle board?

I'm working on a follow-up video now, with what mods I've done and how it's performed, and what I'll be doing to make it better. But the short answer is no regrets on the purchase. I'd definitely do it again.

@@RoofTopRoverOverlandingany updates on the video you’re working on sir? Cant wait.

Not to worry, it was an easy fix. I'd go ahead and drill it right away. That way, you won't have any issue. You will love the tent!

From what I can tell, they may help a little with structural support, but they are plastic connectors that connect the side aluminum rail to the front rail. It was probably cheaper and easier to manufacture instead of one solid rail that was bent to go all the way around. Thus far, I have seen no concern as being a weak spot that could potentially fail. Everything feels very rigid on the fold out cantilevered platform.

So far, it's one of the best upgrades! Super comfortable! I'm making a follow-up video about it.

I'm working on those soon. I'm also designing an annex tent that will use the awning as a modular system.

Just a heads up if you don't know. Naturnest just came out with a annex room for this tent. ($420.00)

Awesome! I'll look for it and check it out.

I just purchased the new annex. I will do a setup and review video once I get it.

I agree! I've used mine several times now, and the more I use it, the more I enjoy it. For me, It's definitely better than my old soft top clamp shell tent. It's way easier to set up and tear down camp.

I wasn't able to find an annex or awning for this specific tent. I just checked their site and don't see one yet. Do you have a link to it?

I'm very happy with it. Especially for the price point. Fast setup and take down. Just what I was looking for.

I didn't mention the overall height in the video. Your overall height is going to very depend on your mounting setup. The tent itself is 11 to 12 inches. With my mounting bars on my GOBI, it adds 3 inches. Also, if you need it, the distance between the mounting rails on the tent is 23.25 inches.

Looks like you found my weights and dimensions video.

Yes, it has 3 fairly good-sized metal hinges. I just got back from a trip, and we had some gusty wind. It didn't have any problems.

I just got back from a trip, so it's mounted in the Jeep. But I will measure it tomorrow and get you the info.

The distance between the mounting rails on the tent is 23.25 inches.

Currently, there isn't one for this specific tent from the manufacturer. I bought an awning from OVS because it was cheaper than others and adapted it and the tent to work together. Here is my video on it. ua-cam.com/video/C7W4elib0BU/v-deo.html I have a link to the awning in the video description.

@@RoofTopRoverOverlanding I was actually watching your video. Very brilliant solution. Looks pretty original also. Thank you 🙏🏻

Coming soon!

I know what you're saying. There is about a quarter-inch gap between the tent shell and the platform. I'm taking a trip this weekend, and it is supposed to be a mix of snow and rain when we are driving. I'm about to see how it does.

@@RoofTopRoverOverlanding I would be interested in your feedback afterwards. Have a great trip!!

Just got back from my trip. We had 6 inches of snow, and I ran 70mph down the hwy. I had no issues with the top on the hwy, and when I opened the tent, there wasn't any snow or moisture in the tent. So far, so good. Also, it matters how tight you sinch the front and rear straps to how far it ultimately stays closed. It did really well once sinched down snug.

@@RoofTopRoverOverlanding thank you so much for the update. That is awesome! I have mine ordered. Hope you had a great trip!!

Had a great trip, I will post updates on gear and tent soon.

This is the awning I purchased. But you could use almost any 2+ person awning out there. overlandvehiclesystems.com/18189903-bushveld-ii-awning-for-2-person-roof-top-tent/

I agree on both accounts. 😄

Probably because it comes in a wood box

The overall height is going to very depend on your mounting setup. The tent itself is 11 to 12 inches. With my mounting bars on my GOBI, it adds 3 inches. If at all possible, for best aerodynamics, I'd try to get it as low as possible. But at least try to get the leading edge of the tent below the roof of the Gladiator so only the top 7 inches of the tent are above the roof.

Thanks, I have a trip coming up next weekend that I plan to do some usage reviews on.

Yep, that was the info I was looking for when I was considering it. I just got a new air mat for it that is contoured about the same shape as the tent. I'm preparing to do a review on it.

Glad I could help! I hope you enjoy it. I just finished making my awning, and it turned out great. I'm editing the video now to share with others.

I have a similar bed rack as yours. This was my question too. When you ask that question on Amazon AI-generated answer says: "The dimensions when closed are 62.99" L x 43.30" W x 11.02" H. I have tried to contact customer service to verify this answer, however they haven't got back to me! Well, I went by AI answer and pulled the trigger two days ago. Hopefully I will receive it on Feb 9. Good luck

Just measured the top closed, and it's L = 64" W = 46"

Thank you!

I have a GOBI rack on my Jeep that I will be mounting it on. I'll post a video this week on that.

Glad it was helpful!

@@RoofTopRoverOverlandingbtw, do you know how much does it weight? It said 195lbs on amazon

I saw the same on the Amazon description. It's definitely not a hundred ninety-five pounds. I'm guessing that's the shipping weight. My 15yo son and I could lift it onto the saw horses with no problems. At this point, I'd guess right around 150 to 160. I'm trying to figure out a good way to weigh it. Once I do, I'll update the video description

@@RoofTopRoverOverlandingThanks so much for replying. Ikamper sky camp is 165lbs so I'm guessing this tent would be around that number as well.

@@RoofTopRoverOverlandingI emailed Naturnest and they said gross weight is 195 while net weight is only 144lbs 🤙🏽

Nice. For the price, it's a great start.