Відео

Same problem 😮 I need remplace that too !!

Where did you buy it?

remove the cable and the plate comes out easy take the 4 screws out and the back plate comes off

You oughta make a Snow Linux distro.

This is super helpful. Do you have a video of how to replace the lens for the M7?

I have a Sony A37 camera, I took a photo and when it was saved in the memory it appeared, "camera error" and I saw that the shutter curtain was blocking the sensor, downwards it can be moved but from the top it seems to be Stuck, the buttons don't react and I tried to remove the battery and put it back in and the same thing appeared on the screen "camera error" what should I do?

I've got the same problem. Dented cover. Might give this a try. Thanks for the video.

Hi, I followed all your steps, now when I press the on button, the screen has a vague glow but the lens isn't turning on like before. What should I do?

What is the purpose to remove a pbga if u already thermal shock the board plus the static shock with a non ionized air . Is the stupidest thing I ever saw in my life

😂

Seems a bit…. Excessive

🚮

Thanks for your interest in the older computers and Linux. I have the same laptop and I think there is a problem with it only having 2 GB of ram. I will check out MX17 version you loaded . Another similar new distro I tried on the Extensa 4620Z is Zorin 17 which has the cube animation effects (which is I know eye candy but I just always liked that animation). 2GB of ram seems very low for some of these newer Linux versions. I have the same sluggishness issues. I find it just fun and practical to experiment with Linux. Keep up the good work.

Hey there, thanks for your channel ... the barrier cover on an RX100 M3 I have, got an impact and has a small ding at the top of the barrier cover. Following a power on, one of the barrier cover 'shields' is stuck ... I have a replacement barrier cover ... do I need to get this far down the lens disassembly to be able to replace barrier cover? Thanks!

thank you kindly for this, PLEASE NOTE that the magnets have to go in the right way or the auto rotate wont work - had to play around with the orientation a few times and boom! working, much love 2024

Are Sony WX500 and Sony HX90V LCDs the same?

No offense guys, but I've never seen such an unbiased and amateurish comparison. Zebra has absolutely enough colors, takes up 1/5 of the space, is not noisy, is fast and the toner can be replaced on the fly in a few seconds. In case of a malfunction on Zebra, you will receive a QR code with navigation to the error. The printer has an NFC reader and an application for mobile devices. The only disadvantage of Zebra is that they do not have an application for MAC. As we can see in the output, Fargo has repeated errors when printing, out of 4 black cards they have 3 errors. That's a 75% error rate. It is large, jams, and is incredibly slow and noisy. In addition, it has a two-line display like on old Nokia phones, which cannot be compared to Zebra at all.

i broke the flex cable lol

Bumb you don’t know wht u doing the car will drive forward from now on

M4 error: " turn power on and off again". What is the most likely cause: cable or lens?

Hello, bit of a long shot as it's 10 year on from this video but I'm having trouble sourcing an lens for my hx60, could anyone point me in the right direction as i'd like to try this fix :)

Super helpful video! Thank you

If I’m somewhat proficient at taking apart electronics (ps5 controller , ps5), how hard would this job be to do?

I have one very important question, can I upgrade Graphics Card in this pic, because I found very good deal in internet, and I wanna buy this pc and gpu for him, and I wanted to ask can I put on Radeon r9 380 in this pc

Nice crash course

Which is best Evo plus our Evo select??

बोलके बता भाई

Yooo I shouldn’t have watched this high I sth I thought I was tripping when he kept repeating the issue different ways

Yep. I bought a 2011 jeep Cherokee Laredo with the 5.7 last April. Ac quit a week after I bought it. Decided to ignore it til this summer and we have a severe heat wave drought now. Been adding several cans of freon every week. After using stop leak and the uv dye cans I gave up looking. Decided to check the front since it smells like freon there and found a ton of green freon all over the left side splash guard and the lines on that left side. Havent tackled thr repair yet. Condenser doesnt have any freon on thr outside fron what I can see though. Possible just the lines are leaking.

Simple explanations Engines designed for AVERAGE 100K Failure cause: rocker bearing is oiled by "splash" oil: through lifter, splashes on bearings. Low pressure at idle =low pressure, especially at rear. Although more common on passenger rear, I have done several on passenger. JL is redesigned, evidentially does same: doing 2022 tomorrow 86k, client ideals excessively (ac for dog 30-45 minutes often). Fix quick, can just replace rear. JK rockers $9ea. JL rockers $92 ea😱

Crackheads, LMAO, am I right?

The way you describe it, it seems like it was blinking pretty fast. My green light is also blinking, but really slowly, like with 2 seconds between each blink (24 blinks per minute). It also only starts to blink when the charger is connected (but continues after disconnecting as long as the battery is in). Could it be the same thing?

Looks like the lense in my camera is broken, I'm a bit worried about the tiny cables, would i get those back in? Where do i get a new lense? It's a lovely camera, makes me sad it's broken at the moment

I am so happy that I could repair my favorite camera with the help of your video. I was so sad that the screen broke through a fall. Although I have no technical knowledge, with your help I learned a lot. And it was a peace of cake thanks to your clear and detailed video to get it working again. Especially with the close-ups you made. Thank you so much for taking time to make this video!

Did you have any issues with your camera just suddenly turning off when taking a picture and does not turn back on anymore? if so and you fixed it, what did you do to get it back on?

BRO ROASTED LGBTQ LMFAOOOOOOOOOO

Sadly, despite getting the sound icon and "passing" the test, I still don't get any sound coming out from the speakers (is not a hardware issue since Linux has sound output on it)

I know this video was posted years ago, but do you know where I could buy a new lens?

Thanks for the video brother 👊👌👍

Hi Dave does the dt psu fits in sff?

Wow everybody talking fast and loose or asking questions. With the advent of DDR4 the memory controller went where and can it be " locked ", . . . Well yes, depending on the PC specifier, not the manufacturer, the specifier. Memory controller moved off the mainboard and into the CPU and can be locked by the UEFI. How does that grab ya. So all or most of your preconceived notions are whack ! i speak from experience with a 2017 HP 600 ProDesk wanting to be a 2400"T". The "T" indicating locked for use in CAS 17 timing and narrow MT or bandwidth range. And Mr. Back Door will come looking for violations. Just remember patrons, we are all being protected so long as we are being exploited ! Cheers.

Thx I have the Delll 3020 SFF (I like the small foot print it takes up on my desk). Running the Intel i5-4590, 16 GB DDR3 ram and running a 1GB AMD Radeon HD 6450 and wanted to bump it up to something better to try to run some older games. It runs the old Battlefield 2 games just fine like it is, but I have a copy of GTAV for PC I wanted to try.

The main difference between these different ones are the lower quality ones are genuinely designed for less sophisticated designs or personalising regards because you have all of them in bulk with the same pre-printed design and you need to put things on like names

Very clever. Same laptop, same problem. Isn't it too difficult to remove the screws with the glue, do you do it before it's completely dries? Thanks a lot.

Can somebody tell me please where to get a spare lense, can't find anything on ebay. Thanks

Can somebody tell me please where to get a spare lense, can't find anything on ebay. Thanks!

cám ơn bạn, video thay led màn hình laptop

Hi Can you please help me change my badly scratched glass with the SONY logo mounted on the aluminium frame.

Wit, so you dont have to take the front bumper off?

thank you very mutch !!!!!!!!!!!!!!