Відео

@@spac9745 only negative is they aren’t magnetic other than that perfect little lights…

@@unlicensedassassin Nice one. And battery upgrade is a good solution. I will get one. Good luck edc freak :D Magnets always helps.

@@dell998yearsago...7 I just got into the hobby but I think so…

I might throw it on the bag Fa sho thanks for watching…!

@@burn1gotbeats I’ll be waiting…

@ me too ☝🏽😎🔜

@@TuttioShaze this was with the same tune as last time ima try one more setup because I’d love to go at least 40 then I can feel confident on main roads right now im just doing sidewalks trails and backroads, and if that don’t work ima just put it back to this one and rock it like it is maybe lower first down a touch for my sin and his cousins…

lol yes I got a ton of stuff just like inspector gadget good call…!

@@RetroMancer242 I don’t might have to get that done…

@@unlicensedassassin I just seen it in the video.

NVM that's just you recording.

@ I’m actually watching UA-cam videos and GPS wile I’m recording a UA-cam video lol….

@@unlicensedassassin ShitTube addict. 🤣🤣🤣

@@tanis-wy5fx ya very clunky…

@@Fintiso Thank You if you have anything else you want me to feature just let me know…

@@TuttioShaze I wanna say it’s the auto learn but ima try this other guy tune and then if that don’t work ima just set it back to stock and rock it like that..

@@unlicensedassassin, the settings going around with ratios in speed all 80%-100% is not a tune. It’s some nonsense lol. Weight has nothing to do with top speed unless you are going uphill or downhill, but if you are a big guy wearing a fluffy coat, the aerodynamic drag is what limits top speed, assuming the battery is fully charged and the controller os set for turn and burn (max amps, no attainable rpm limit, weak response 0. Obviously for max acceleration, all you can do is set Max Line Current to 70a, and then Max phase at 240a. As long as the BMS doesn’t trip, these settings are fine. For top speed you need to remove the rpm limits. That means MaxSpeed must increased above 3500 factory setting. You can set it to 9000 rpm while testing because the final step to decrease it to the correct value which is determined by screen recording the graph page of the fardriver app. With MaxSpeed out the way, ratios in speed was factory set to limit rpm to about 3800 rpm. So these can TEMPORARILY be increased to 100% from top to bottom. With weak response 0 (max field weakening enabled), you can find level road with no wind and set the fardriver app to GRAPH and start screen recording. Then run full speed snd hold it for 10 seconds so it can stabilize. Then end the screen recording and review it. When I review a test run screen recording I look at all readings: Rpm when “weak” first appears on the screen Max rpm (average rpm during the 10 seconds at full speed) Battery sag from before acceleration until throttle release. Throttle low and throttle high signal voltage DC amps to ensure they went to 70a and stayed there, Phase amps to male sure they came down to around 60a-80a because thats the normal relationship of line amps and phase amps. Next is the interpretation of the data. You have to look at battery sag, which can affect top speed if you are already at the rpm where field weakening is needed. If you see “weak” on the graph page, it means you need or already using field weakening to go faster. If the battery is sagging too much while the controller is sending field weakening amps, it will go slower than possible. And the only way to let some battery sag recover is the reduce LINE amps. And the only way to reduce line amps without a hard rpm limit is to reduce the % of the ratio in speed near that rpm range. Ratios in speed is very simple, it does ONE function, and that is to reduce the PHASE AMPS to a certain percentage of MAX PHASE AMPS within an rpm range. That is all. Now the EFFECT of changing that is what we are looking for. So if your top speed was using 80a phase current, thats 33% of 240a, so those setting theirs to 80% are doing absolutely nothing, because 80% of 240a is 192a. So if you set your % to 25-30% at the RPM corresponding to your max rpm reached, it will reduce phase amps, which WILL reduce LINE amps, which WILL allow the battery voltage to recover some, which WILL reduce the amount of field weakening current needed. So ONE of the EFFECTS of setting ratios in speed is to LIMIT FIELD WEAKENING DEPTH so that the current doesn’t get locked at maximum while not really going faster. Reducing phase amps which are primarily for field weakening current lets the motor run cooler and the battery also run cooler. Finally after setting the taper down to 1% or 0%, doing several test runs, we will know the max rpm and can go back to MaxSpeed and set it so it just barely reduces rpm. This adds stability to the speed and makes it safer to run full throttle on a stand. Ive know people who did not set the rpm limit and their hub-sink exploded when the motor ran 2200 rpm. And yes, I can see all this in 30 seconds from one screen recording of the graph page of the fardriver app. The reason NOBODY Has made a real tuning video is you would need to include a 1 year engineering curriculum lol. This just covers basic tuning. A real Fardriver tune includes PID settings. AN, LM and Current Loop KI settings. KI settings are the most neglected because the fardriver manual doesn’t tell you how to tune them and you can’t see the effect directly.

@@dronesdogs3798 right I try lol thanks for watching… broke a front shock on my MJX 1:16 scale easy fix…?

@@Nick-s6n4k 32mph but I’m around 210 pounds…

@@unlicensedassassin okay thanks also how fast was it without and with the tune

@ honestly 1-3 mph I don’t think I have it all the way tuned properly but I’m still tweaking it… if you weigh 150-170 you can go 40-45 mph…

@ 1-3??? and will u drop it once u have found a good tune

@@Nick-s6n4k ya very minimal gain that’s why I don’t think I did something right of course once I get it all dialed in it will be posted…

@@TuttioShaze right idk what I’m doing wrong but I woke up to 6 inches of snow just shoveled my driveway I can’t even ride to go test a new setup that was sent to me…

@@unlicensedassassin Things I don't miss about living up north! lol I'm in Fla. now. Might get a lil chilly but can pretty much ride whenever.

@ originally from Mississippi moms moved us out to Utah in the 2000 been here ever since…

@@TuttioShaze ima be honest I tuned mine again today and maybe got a mile or 2 difference in top speed from 31-33 but in second tour mode I get about the same speed I’ll post that video later if I get around to editing it so idk what I did wrong but my battery was low wanted to deplete it on my first cycle so I know how long it takes to charge from empty…

Set the ratings in speed after 2500 rpm to 50. Set the speed limit to 7500rpm. Set Weak response to 3. Experiment and don't forget to check the engine temperature.

@ it won’t let me copy so I can translate it can you send it over in English possibly…?

Yes I can. But my UA-cam is translated into this programm on russian language quietly. I use a hacked UA-cam

@@unlicensedassassin Yea Bro, I had the same issue. I got up to 38. But its like every mode is the same. besides top speed. Im gonna reset it. And try again. I have to do that auto learn thing as well this time

@@TuttioShaze what did you change…?

@@unlicensedassassina lot of stuff, lol I got it from that fb group. They have screenshots in there so I just copied it and it worked

@ I just sent you some screenshots on IG. Hope that helps

@ helll ya it will thanks pimpin!!! 🙏

How do you tune it?

@@isygaming3167 yes I was the same way but I said I’ll be a beta tester and get one and see how it holds up so far so good only have 15 miles on mine I’ve seen people with over 2000 miles already… as far as the tune that’s a whole other ball game…

@@androsmilenionful ya others have said that I guess I got lucky there it is a bit quieter than some others I’ve heard on UA-cam….

Might be the chain tension and lube helps too.

@@AlexCarrasco-b2j still on first battery charge it’s dropped 1 bar 15 miles on the odometer…

@@unlicensedassassinwhat mode was u in the whole time😊

@ I was mainly in tour mode second setting on this ride…

Happy new year! Thanks for watching I’ll look into them..

@@EbikesBros hell ya I saw thanks watch as many times as you like lol naw hopefully I get my shit going 45mph but I’m 203 pounds so maybe that’s why..?

@@unlicensedassassin I’m 200 pounds 5’9

@ Ait I’ll give it a shot…!

@ I feel like an idiot but the 70a what was it before so I know what one to change…?

@@unlicensedassassin tbh I forgot but I’m not sure if 50

@@IanMcCready-e7x you can’t beat this for the price you should be fine at your hight if you don’t care what others think of you riding a sold called “kids bike” ya know but if you plan on modifying you’ll be glad you started on this platform… I figured I’ll start small if I conquer this I’ll end up getting a free go x2 or g73

@@Cyber_Scrambler Happy New Years Everyone Be Safe This Year!!!!

@@ryan93civic1 Ok got ya…

@@TuttioShaze heck ya do you know anything about the dongle tuning…?

@@camw6990 yikes might be sold out you couldn’t find it on eBay…?

@unlicensedassassin well i say everywhere i looked on walmarts website and nothing. Is it discontinued and i missed that part?

@ yup sold out it was in the center aisle tools for $10 bucks I’m sure as soon as those units where gone it was sold out…

Found 3 on eBay for $15 and $18 if it’s a must have

@unlicensedassassin nah i have 2 different klein lasers lol just thought hell if i could get one for like 10 bucks easy i would try it.

@@Daman1311 there pretty sick 🤢 this lil thing is goina be so fun…

@ u gonna upgrade the battery to 72 volts? it usually goes 50 mph when u do!

@ 97.222379 % sure I will… thanks for watching sub and like

@@ice.._ Beautiful Holiday Knife Love Swiss Tech… Thanks for watching!!!

@@RobertStoner-qn5ez yes nice set horrible design for the sheath…

@@ice.._ heck ya came out nice thanks for watching…

@@bryanCLXT MERRY CHRISTMAS 🎁 HOPE YOUR HAVING A GOOD ONE!!!

@@ice.._ me 2…

@@Agabus04 I have about 10 more videos until I get to my next Olight videos… thanks for watching!