Відео

Unfortunately I don't remember the size of the o-ring that our cars take. I would have to check my repair manual and let you know

I don't think that you'll be able to bypass that adapter on it. I know that your can't buy that piece new. You'll have to source one at a junkyard or ebay

The tank on these generation of Suburban's had one of the biggest awkward sized tanks on a suv. Especially if it's full that tank is hella heavy 🤣🤣 . But I don't have no regrets at all about cutting my floor on mine. I can still load things in it like normal and most importantly I know have no gas smells coming inside of it.

My apologies Ed. I'll do a make up video on how to do this repair

@ would be nice, thanks

Do you have the 4.9 engine in yours also?

No problem at all. Happy Holidays to you and your family

You're welcome. I'm glad that the video helped out.

Hey Frank, If my memory serves me right. The doors are held in by the pins in the hinges

Don’t you have a video ??

@frankruggio5067 i will check and report back to you

Thanks for the feedback. I'm taking it that the video helped out for you

Thank you for the feedback. Appreciate it greatly 🙏🏽

Hey Barney, I no longer have this car. But when I sold it it had 125,000 on the odometer

​@@lawjo1978 you know someplace where I can find a clockspring for the 2013 model for cheap?

@barneystinson3358 Are you looking for the factory OEM or aftermarket?

@@lawjo1978 Anything, I just want it to work. I've lost the use of my cruise control, horn and all other buttons on the steering

@barneystinson3358 I would check out www.rockauto.com or www.ebay.com as they will have some pretty good prices for that part.

Thank you for the feedback. And all the way from Australia. I'm speechless

Where are you trying to take the line off from?

Thanks for quick reply.I ended up taking the whole resivour. Everything is disconnected except the pressure line now. It's rusted and seized. Gonna try and put some heat to it, if that doesn't work imma need new lines.. any tips on dropping cradle

I was gonna cut it and buy a new line and put a pressure coupling but it doesn't look like there will be room

@jasoncovyeow3267 When you get ready to drop that cradle. Please, please have a jack, and of course jack stands. You will loosen up one side at a time while you have a jack for support. You'll take a bolt all the way out and screw it back 8 to 10 thread counts because you'll want to have the cradle in tact.

Thank you 💪🏾

She running for a luxury old girl 💪🏾💪🏾💪🏾

I appreciate it 💪🏾💪🏾💪🏾

Hey Gyro, It actually worked out good. The gasket seem to be made of good quality

@ Sweet thank you, won’t have to worry about ordering a separate one.

@gyro1009 Unless you have a specific brand that you prefer. Otherwise you'll be fine with the one they supply with the kit.

One of the best luxury cars I've owned yet.

Hey Codoug, Yeah that rubber gasket can be a pain sometimes. But what i use for the rubber O-ring is silicone grease as it will help significantly with the install. But one thing that's very important when doing this install is making sure that fuel pump is centered before putting the snap ring on to lock the pump

Actually found another video that showed fitting the gasket on the tank instead of on the pump and that was the key. Getting the compression ring on took quite a while to but eventually I got it all on and the tank back on. Quote I got was $850 and I could see why as it took much longer than I expected. This was my 3rd fuel pump installation and by far the most difficult one.

When I did the pump install on my Suburban. I had 42 gals of gas in it. And the pump had died out on it. So this was best option at the time. And it's been years later and I don't have not one regret at all

Actually where the pump goes it has like a lip where that gasket goes too. You can do it that way as well before you put the pump in.

To clarify how I did it, I installed the gasket on the lip on the tank and not on the pump. If I put the gasket on the pump and pushed it all the way up, you couldn't get the compression ring on.

Hey James, Happy Thanksgiving to you if you celebrate. I'm gonna have to invest in some of those. Because I would definitely like to enhance my videos. Thanks for the feedback. I appreciate it greatly....

@@lawjo1978 I don't know why more UA-camrs don't use them. It would be like learning through your eyes and bonus, your hands are totally free to move about.

No problem at all. I'm glad that they helped out

Thanks for the feedback. Appreciate it greatly

What's going on Kirk, No it wasn't at all

@lawjo1978 I'm doing good Mr Jones I may have to come to TX and get mine painted 🎨

It's like 6 grand out here ..how you doing man?

@KirkKnight-f9z Well come down to Texas. And we can make it happen

@lawjo1978 thanks man you are the best

Happy Thanksgiving to you and your family

I felt that they should've had the shifter mounted at the console. As opposed on the dashboard

I found it at rockauto.com

Are you experiencing tight steering?

Yes , intermittent power loss but not a full on tug of war with the wheel. The problem isn’t cruzin around town but occurs like if you got to cut it to pull out the gas station. Or turnin at the stop sign while you sit aft idling for a second. All that being said , everything else under the hood is fine. Runs like cream, but this got my mechanic n me stuck on stuck. Loan me some thoughts friend!!

@RozzallinBrown-ol7kd You may have some air the lines and may have to bleed the steering system

I have a 94 deville do I have to use the powersteering adapter or can the hoses go strait unto the resevoir and pump?

@ordllacc4 your pressure line is gonna screw into your power steering pump and your return ( rubber hose) goes onto the reservoir

You have the convert over to the new plug on your truck. Much more reliable

The one plug setup is way better than the original 2 plug

So are you saying just rewire to the new plug and leave the extra plug alone?

@codoug777 Good Morning, currently it sounds like you have 3 plugs correct? One of the plugs has 3 wires and another has 2 wires. You connecting 5 wires into that one newer design plug. And once you're finished you will end up with that one plug and the other one is for the fuel pressure sensor. If you have any issues just shoot me an email to lawjo1978@gmail.com and I will provide a number and we can talk if need be. Thank you....

Thanks for the offer. I had 2 elec. plugs but the pump I ordered had only 1 plug with 4 wires. I ended up sending the single one back and getting one with 2 plugs like my original to be sure it would work. Note to others that u might wanna verify how many elec. Plugs you have before ordering as different pumps are sold for the same make and model with different plug configurations.

Hey Erick, Thanks for the feedback. I'm glad that my video will help you out with the repair

It's a ground strap for the horn

The Seville and Eldorado with the Northstar is very similar in terms disabling the ride control message. If you send me an email I can send the information

@@lawjo1978 I already replied but as I see it was removed so once again: it's dustblowboro at most-popular-mail-service starting with "g" - thanks in advance! :)

@@lawjo1978 can you just post it here? (still no mail...)

@grzegorzsawa-borysawski7261 send me an email to lawjo1978@gmail.com and I'll send it them to you

@@sat159p1 Check your email. I sent it to you

Hey Mr. Dennis, Thank you for the feedback. I appreciate it greatly. God bless you and your family 🙏🏽

Hey Jeff, Thanks for reaching out. I appreciate your feedback. However I no longer have the car anymore. I do remember that I used a flathead screwdriver and regular sized hammer to separate that tab that keeps the window in the regulator.

@@lawjo1978 ok thanks...i was just worried about the glass breaking but I'll give it a whack!! Lol!!

@JeffreyPlummer-m2f i remember when I did that repair. I was super scared that I was gonna break the window. But I didn't hit it real heavy when I was in the process to doing that separation

Hey Jorge, Did you check the fuse for the compressor?

@lawjo1978 I did and it's good, I even put a new one

@jorgemartinez1538 Did you check to see if your leveling sensor needs adjusting. It's on the left wheel rear control arm.

@@lawjo1978 I will check it, to see if it didn't get loose

@jorgemartinez1538 Keep in updated. We'll figure it out

Have you checked your fuses and/or relays for your headlights? If not I would check those first. But if you have checked those already. The install will be very similar to this vehicle

@lawjo1978 fuses and such are all good. Appreciate the advice though!!!

If you go with this method. Just be. Very careful with making the cut in the panel and keep sparks to a total minimum. 30-45 mins to change a fuel pump as opposed to hours long doing this. Give me an access panel

I'm still enjoying it 😆