Відео

Thank You this is the Optima gt1080hdr. My house color is white. Projector is about 17ft back from house.

atmosfx.com/?Google&CPC&/UI/SX-M-US-AtmosFX%20A1%20Branded&Atmos%20FX&gad_source=1&gclid=Cj0KCQjwyL24BhCtARIsALo0fSDEfx296GN_NSjH0eyacl6Bh10E-TSYiefTFKUzyDJJCMB9LcMPVJAaArgIEALw_wcB

Such wise words fella!... btw.... Macs suck mate

How did you do it ?

I just noticed while re-watching my video that I only turned the power off to the projector.....this is why I believe it worked... The 1st time, I completely shut off the power to both, and it didn't work. Might be why you are having issues. I haven't used it since making the video as I use a pi to play my shows. This would mean you would need to keep constant power to the media player in order for the auto playback feature to work, which is kind of a pain..... I'll have to revisit this when I have a chance. If that's the case, it works just like my older APK player that I ran for my 1st year of projection mapping back in 2020.

​@kennyrobman7390 ok so make sure you have auto playback selected for video. Then make sure your shows/media is NOT in a folder. Just have them all on a sd card or flash drive. This is how I made it work with completely powering it off every night with an outdoor timer. Turns on and off the projector and media player at a certain time every night with no issues so far.

It's 19.1 and it's on auto openCL as that's the only option I have.

I have mine set it to Auto, Auto and also on 19.1 and do not experience any issues. But I don’t have any of the effects you have, so probably depends on the type of effects or video clips you are trying to edit/render.

Problem I have is that it didn't do this on version 18. What is this openCL doing to my computer as all my renders are running slower and I constantly get freezes while scrubbing through the content. This has got to be the worst update that davinci has done and I'm hating it. Can I go back to 18 without losing my shows now that I opened them in 19? Is 18 studio version still available? Need help ASAP as I create these shows for the upcoming Holidays

@@ronaldbruneau1980 I haven’t had to roll back to a previous version of DaVinci Resolve, so I don’t know if you can. However, based on the Reddit community you can back up your database, remove 19, then install 18 and restore your database. I also don’t know if 18 is available for download anymore, but I do have older versions saved and can share it with you via Google Drive. Just let me know which version you need.

​@chasuav so this is what Blackmagic just sent me feom tech support and they also sent a link to get 18 back. Hello Ronald, That is correct. Anything started in 18 and then used in 19, will have been updated. A message was prompted prior to you doing so stating as much. Unless you have 18 back ups of the projects, you would be locked to 19 for those projects that have been updated. The problem is that I started to open the shows with 19 which sounds like even if I fo back to the 18 version I corrupted the files by opening them in 19 so 18 won't recognize them if I'm understanding what I read correctly. I may have to fight through 19 now as I opened too many files already with 19

this is a computer video

The glowing effect was created in davinci resolve. I just use power director to put my videos on UA-cam

Gateway gaming laptop that's what came in it.....

It does exist it's a laptop GPU.

If this is Vince from DAD you definitely don't need my help......😄

Good question as I have only the original sized spare underneath....so I can't give you a yes or no on that.

@@ronaldbruneau1980 I had 285/75/17’s on my truck and that size fit underneath. I tried 35’s and the spare didn’t.

@theirthereandtheyre2947 good to know I'm actually due for new tires Probably going to back down to 33's as I'm doing way more city driving. Should improve my take offs as well.

Items still stick to it if left on for a small duration but the marks disappeared after a short time. Besides that it holds up good and still looks 👌

Yep I average 14mpg on 87 and 11 on e85.....😬

Yes

Would make sense as the wiring would be more likely to be moving

12.5 but honestly after having them on and mudding for a while I would stick with 33's unless you lift the front up more possible 2 to 2 1/2 lift as I am getting some rubbing on tight turns now that front end has settled down.

For the price I wasn't super worried about it if it failed and it's met my expectations. I have much better sounding water proof bluetooth speakers but you don't get the google assistant feature that I wanted so I'm still very happy on how this worked out.

@@ronaldbruneau1980 yeah, not too worried about the price. More concerned if it could cause an electrical fault and perhaps fire 🔥. Might add to the "cost" 🤣.

Luckily mine was under warranty so they replaced it but yes I agree it should be a recall.

Christmas Canon g.co/kgs/xATV7F

Actually its Canon in D. Written in 1680. by Johann Pachelbel . Trans Siberian Orchestra added modern lyrics to it in 1998, and did a pretty good job of it.

Still working great!!!

2" on the standard rims

@@ronaldbruneau1980 have they held up?

Yes no issues and I drive hard.....

@@ronaldbruneau1980 hey man one more question I’m about too put on some Toyo open country mts on and I was wondering do you think I could clear the UCAs up front without spacers

@@luker6766 what size tire? And did u put any lift on?

Excellent to know Thanks

Sorry to hear that.....ironically I always have bought Samsung phones and have had no issues with them besides the occasional cracked screen which happens to all the phones if not handled correctly. I just think that phone was a lemon as I have another and besides a small Crack in the screen from a pretty good fall with generic case I can't complain as it's been working fine.

Thanks for adding that info....not sure if that works for them all but very cool to know that it may be an option.......👍

@@ronaldbruneau1980 worked for mine,,,,.it started like everyone describes, fuzzy at first, works then fuzzy until the last time,.screen just turned blue and said camera unavailable, did what I described and it worked

2.5 lift was Just on the front Over time I noticed it will slightly rub hitting reverse with the wheels turned but it's not too bad I am going to try and angle cut the plastic deflection guard under the bumper which is what I believe it may be hitting.

Dick Cepek Trail Country

Yes they r still working perfectly........👍

@@ronaldbruneau1980 awesome. Thanks for the reply

It is on A1A north of ne. Causeway Bvld. In Jensen Beach FL. not Jenson.

Eustace residence, 4545 NE Ocean Blvd. Jensen Beach.

Do you have the 3.6?

@@CHANNELCHECKER381 yeah when I do it I will let you know

@@CHANNELCHECKER381 check out That Black ram here on UA-cam hes got a great build

Any issues running your 35s?

@@RickySlatton they go on next week. From what I have read the only real thing you lose is mileage. If you want to run bigger tires and stick as close to stock running 33's is your best option. I've read guys running 22' with 33's and losing almost nothing.

I've read around some and from what I gather if you want to keep it as close to stock as possible go with 33s

I get 11 and change with e85 and around 13 to 14 with 87. I drive pretty hard so I don't think that's too bad......😄

Use the menu button to scroll through the different screen set ups and make sure u have a memory card in it. Make sure you hold in on the menu button to get the hidden tool screen. Honestly mine started recording as soon as I turned it on but maybe your settings were different from the factory? Let me know how u make out

Truck is at the dealers now to fix that along with some recalls that the vehicle had. I had purchased a warranty when I got the truck that should cover the fix. I'm hoping they just replace it with a new one. But I'm not sure these cameras are very good to begin with.

Dealer changed out camera and it works fine for now.

Dude u need to check the reverse camera fuse , might be an easy fix

Sorry for the late response but I've not yet messed with mine. If I get a chance I will post a video of changing them. Thanks

It's not as intuitive (or user friendly) as you'd hope, but here's their video on it: ua-cam.com/video/LwNiXsYFBCo/v-deo.html