Відео

@@WhiteoutSnowy it was red the previous owner did a cheap paint job that is chipping badly. We plan on removing the purple paint and clean it up as the weather warms

I rarely use it and forget I need one till I’m in it and need it. Unfortunately no place local carries them

Thank you I had no idea.

@@markmcarthy596 I’m considering setting him up his own channel

@@kenlawhon-vf7bt thank you. After almost three foot in a week I wish I could say no snow here lol

@@SquirrelyScrat3075 thank you hope it helps. If he runs into trouble and needs help feel free to shoot me an email

@ his 4x4 light is flashing and it won’t go over 25 and sputters he tried resetting this but I’m thinking his actuator is bad

@ without doing research on it I do know you can buy an actuator bypass. They are a few hundred dollars so idk if replacing it would would be cheaper to get the parts and replace it or bypass but here is a link to the company that makes the bypass kit knightatv.com/collections/sure-4-manual-4wd-conversion-kits

@ it looks like the actuator is about the same price and not difficult to replace

@@momohunter72 thank you for your time and knowledge sir. Keep up the good work I appreciate it

@sur.bet00 it’s an oil so it shouldn’t have locked anything up. Is it by chance extremely cold where your at?

@ no the bike is inside it would pull but would pull back hard went and got the mmo today put it in would pull at all lol spun the pull wheel backwards and it will pull but splashes the oil from the exhaust

wouldn’t pull*

Mine did that before I tried this. It had a spot it would lock up at. I took the pull starter off and used a long screw driver to try and turn it. It would always lock up at the same spot. You might try letting it soak longer or trying tranny fluid. We had a tractor years ago with a stuck piston. Filled the cylinder for a week or two with tranny fluid and it worked perfect from then on

@@momohunter72 what tranny oil do you recommend?

Yes that sounds great. My email is mageefarms72@gmail.com.

I’ve had them rebuilt at a hydraulic shop twice. They start leaking again after about three months

I’ve had them professionally rebuilt twice. They started to leak again after about 3 months

​@@momohunter72oh ok i have had good luck with the shop locally here

Roughly 30x40

I double checked with the manufacturer and was told the outside is reflective fireproof insulation. I will definitely hit it with my propane torch when I get home to be safe

It may be illegal but it still happens on a large scale. The slaughter takes place across the border but the sales still take place. In Missouri there are two slaughter auctions that I know of. The rescue group I got him from works with the auctions and the meat buyers to find homes for them. So yes he was rescued, slaughter still happens. And no I was not the highest bidder at an auction

Thank you

Most of our dogs,cats and horses are all rescues. I try not to judge but I cannot understand how a sweet gentle and well trained animal could be sent to a kill pen. Unfortunately I can’t save all of them but I hope to make a difference with the few I can

Thanks I’ve never heard of that one. I will check it out

yes, Ive been doing cryptozoology research since the early 90s. Im hoping to start a second channel about it soon.

I put it in during the summer and it is just getting cool enough to start using. I haven't yet but have only burnt a couple small test fires. I will be finding out soon

We have not used it a lot yet.i gave it to My son n law who has a small Kubota bx tractor to use for snow removal.

I did not and we have been running these for a couple years with no issues

@@momohunter72 I got the hyper just like you, it says it's the hpr900 but yours looks a little different. I have to assume that the inner workings are the same and it's built for 12 v everything.

@anewkindofthomson I’m not sure but when I was doing my research there were several models and several different brands that all had the same internals. Hypertoys parts website list all the 900s as having the same parts is I remember correctly

@@momohunter72 oh great! Thank you, I wasn't able to access their website I guess they're redoing it?

@anewkindofthomson if your building it for a younger child be aware it will go a lot faster. The first one I did was a power wheels skid steer 6v to 18v drill battery. His first run he was drifting with it and I was told to undo my modifications

I hope you enjoy it, we love ours. I try to put videos up of any mods I do including the winter cab I built

@@momohunter72 oh I’ll check that out! Thanks

Unless you are just needing them for a single light job stay away. I have another video of some quick attach ones I bought for $275. That have worked pretty good

No I just added it to the cylinder through the spark plug hole. The next time I ran it it did smoke for a few minutes

Thank you. Something honestly I hadn’t thought about but will definitely be adding

Why thank you! I just got a shave and a haircut, 2 bits

@markmcarthy596 don’t steal my vibe lol

I have been meaning to but kept getting sidetracked. I just filmed a follow up it should be uploaded to the channel in an hour or two. I will add a link to it at the end of this video.

I have others that have been converted for almost three years now. I have not seen any issues with the rides but after about 6 months of heavy use the batteries run down faster.

After the 8th time mine finally reset and has been good. I had bought the bypass/ delete kit and decided to keep it just as n case I needed it later. We have three praries and it works with any prarie or brute force. I just added a link to it in the description the cost is $89. Hope this helps you

I'm getting ready to buy a 03 seems to be pretty solid atv for 1800 what you think good deal

If it’s in good shape not a bad price at all. I paid $1800 for mine 5 years ago with carb issues and a few other things I could fix. It took a couple years to get it running right but once I did it’s been great. I’ve had 4 parties and every one has been great

I have a 03 prairie 360 4x4 and it will not come out of limp mode. The light doesn't speed up during the process it stay as fast as the beginning. I'm not sure what to do. I don't want to throw money at it and it never run properly.

@ you need to make sure it’s not something major. In my case it came on due to the belt. I changed it but it did not want to reset. Knight atv makes a product to bypass limp mode but if you have a serious problem doing it could mess up your bike in the long run. knightatv.com/collections/kawasaki/products/brute-force-prairie-kebc-delete-hole-cover-combo

I didn’t put a lot in. The fluid level in the bottle was even with the top tip of the label. I add Lucus and seafoam to my fuel and oil. They might do the same but I’m not sure, I have used transmission oil in a tractor with a stuck piston in the past. Filled the cylinder with tranny fluid and let it sit a week. It brought it back to life.

@@momohunter72 unfortunately didn’t help ((( any other things I can check to fix it?

@crazyturtle16 try doing it with transmission fluid and let it sit a few days. Suck out as much as you can before trying to start.

Worst case a replacement engine was $45 on Coleman’s website last time I looked