Відео

Are the pawls interchangeable? When you reverse the pinion gear, can you use either pawl?

This is the fast, fun and easy way vs. buying and using the crank that they sell even though the manual says just run it backwards!

Thks & cool accent

Justin fix it

I tried this and it worked just as suggested! Thanks!

Excellent video. Brutal German efficiency. Loved it!

Brilliant! Thank you!

Great video, clear & concise

Works great! ua-cam.com/users/postUgkxprGGPRQoChQaA8u58dt7miEpxQBKiWeJ More difficult with longer grass, though, but I was expecting that. I have a small back yard, it seemed like overkill to buy a lawnmower with an engine. This is easy to carry in and out of the basement through the bulkhead. Very sharp (be careful). At the back of the mower are little wheels, which I use when pulling the mower backwards, so it's easy to readjust direction. I'm including a photo which shows the before and after for my lawn when it was at its longest. For long grass like that you really have to put some muscle into it, and I needed to go into a new section of grass with some momentum, but when the grass is only an inch or two higher than regular cut height it's quite easy. The lawn is still patchy and full of weeds, but at least it's a good height! A step in the right direction.

Does anyone know about the blade sharpening kit?? or are people just trying to make money from this

Looking forward to trying this -- thank you! Also: Cleaning with gasoline -- very badass. Nicely done.

Do I need to ensure the paul is put through the same way as it was put in before ? Or it doesn't matter, the pinier gear switch is the key ?

Best sharpening video I have seen, I'm gonna try this tomorrow. Thankyou

I wished I had this before I bought my second mower. Now I’m at Home Depot for the lapping compound. Hoping I can find it.

When a man with an accent like this tells you how to do something... You shut your mouth and listen. He knows what he is doing.

10/10 👏👏 Greetings from Argentina 🇦🇷

I looked at many videos on this topic and this is by far the best. Thank you! My vintage reel mower is now like scissors on wheels :)

You’re welcome Crystal for the yard being clean

It doesn’t matter if Greg is the only dick in the sea I wouldn’t want it not if you were the last thing on earth Greg Keep the Steppin

You are awesome! Thank You!

Thanks, what do you use to lubricate?

Fenomenal

Very useful video thanks for sharing 👍🏽

ive been looking for this video FOR DAYS. I remembered watching it years ago when I was college student and I finally have a lawn now after all these years and I got myself a used reel mower and spent days looking for this video.

What liquid is the one that places first?

I'm doing this to an old great lakes mower, I'd like to thank you for this great video..

30 yrs my push mower has been in the shed....dull blades. DANG !.. I can sharpen the blades. ! Thank you.

If you had a professional camera person you could start your own TV series. Very well done! Still better camera work than I could do lol!

Wow that's the best tutorial I've seen yet. Thanks for sharing your knowledge, blessing...

An excellent method. Thank you.

I bought a sharpening kit with a crank. The crank doesn't fit my mower. I never thought about switching the pinions. What a good simple way to accomplish this. Thank you very much.

Cool, are all push mowers done in this fashion?

Thank you sir.

I watched this a few weeks ago and thought, I can do this! went and bought a second hand mower and brought it home and it's this exact mower. Picked up lapping compound and grabbed a screw driver and I just had the most fun mowing a lawn ever. Thank you for the tutorial!

Thanks buddy very nice video

Very clear and simple instructions for disassembly, cleaning, sharpening, and reassembly. Thank you for this tutorial.

Thank you very much this was super helpful

what is lapping compound just bought a reel mower says good for 2 to 3 years before sharping again 16" american cant wait to use it wish they would have included a parts book

Hi This is really simple. I'm thinking of buying a used mower. So how long do you need to run in backwards to sharpen the blades? Thank you

Hello from indonesia, thanks for your time to share your knowledge and shares. Clean teaching video. I got a used mower from local market, rusty and dull. Had follow your instruction and got good result but not yet perfect. I found troubleshoot that 2 blades at the edge caused jump effect (bumps) when it touch the bed knife. Those 2 blades wide seems not flat. Hope you kindly give me advise what to do to fix those bumps, so those 2 blades side can perfectly contact the bed knife surface and can perform better to do this sharpening methode. Sorry for my worst english, sir.

Where do u get the stuff u put o the blade from and what is called?

Thank you for the clearest expansion Works great mower has never been so good

Gasoline is dangerous don’t smoke 🚭

Muy buena la esplicacion yo tengo una makina Masisa una verdadera relikia pero funciona pero no corta muy bien voy a seguir sus consejos mil gracias

I just picked up a like-new slightly used reel mower for $10, adjusted the bed knife, and it already cuts well. But now I know how to sharpen it at the end of the season. Thank you so much for this excellent tutorial.

This technique worked so well, I feel like an idiot that I was cutting my grass with such dull and poorly positioned blades. Another UA-camr had an elaborate method using a power drill. This one is so simple it's genius. I set it up as directed, pushed my mower up and down the street for less than 10 minutes, and reduced my mowing effort by at least half. THANK YOU!!

Super

Thank you so much for posting this video. This method is very easy to do and yields a great result. I've used a drill to backlap previously, but this will be my preferred method from now on. Thanks again!

Thanks. Your clear explanation of the job is appreciated!

Nice job! I especially like that you mention when adjusting the screws that a 1/4 turn is a big adjustment [other UA-cam videos floss over this explanation], it is in line with American Lawn Mower Mfg. product manual [pdf file], they mention this is a very sensitive adjustment [they consider a 1/16 turn is a major adjustment]. When you think about it - when you've done the lapping process once [creating equal pressure/drag across the bed knife] the adjustment of a 1/16 turn is plenty to do the job when you lap the next time. I certainly will be subscribing to your channel, I like your approach and insight.