Відео

Put the knobs on backwards

This saw has a critical design flaw which makes it a bad choice for anyone doing fine woodworking or finish carpentry. The blade is not situated fore-to-aft where it should be relation to the fence. Even when pushed all the way back, it’s too far forward, so that as you’re finishing a cut, the teeth are exiting through the top of your workpiece lifting up unsupported fibers resulting in tearout. It’s too bad because the saw seems nice in many other respects. Glad it’s doing what you need it to do, Greg, it looks like you have a nice setup there. Hope this helps anyone considering purchasing.

How is the weather temperature wise (hi's and low's). I own a .33 lot somewhere there which I got for free ;) Never been there, I'm from Phx valley so bit far from me. Maybe one day will visit.

What about if it falls on the ground not grass is it still easy?

Did you screw the actual unit to the board? With just screws in the two wings the unit will still lift off of the board

I would put a plexiglass window into the dust collection box so you could see how dusty it is, observe functionality, and see the wheels spin if you step back (but not get distracted by them while cutting since the window is only into the bottom wheel where it is needed)

Exactly the thing I need since removing my Yost 750-E from my temporary bench and deciding not to install it on top of my new bench. Thanks!

Thanks for your work! I know it uses 6" discs - do you know the arbor or mounting hole size?

From a fellow “Greg.” This is the first video of yours that I’ve seen. Loved it. I’m just coming back to woodworking and turning after a 24 year change of career that has taken me to retirement as of a few months ago. Carpentry was the first half of my work life. I truly appreciate your humble style and logic. I appreciate that you’re not (yet) in 5000sf shop with 80K worth of tools which seems to be the norm on videos. I love that your plan is as on a paper bag and made sense. You also light and film very well and have good sound. I look forward to watching more of your videos. Keep up the good work. I have a two car garage. 1/5 of which is treated wood stacked for drying to turn. So I’m steeling your flip cart idea to help save space.

great build! i need one of these in my garage workshop.

OMG your little helper! The helmet and the boots! 🥰

Bro, thank you for sharing ideas, I have the same bandsaw machine but named TAUCO , watching from ZANZIBAR ISLANDS

Are you able to make dado's with this saw? Im curiouse if its posible

Are you able to make dado's with this saw? Im curiouse if its posible

Another great job. I’m 76 and 8 weeks past a triple bypass. I’ve been a ‘jackknife carpenter’ in the past but only to build simple things. During my recovery I’ve been bingeing on UA-cam clips of French cleat systems, plus tips and tricks, jigs and shortcuts. And I’ve been inspired! In the past couple of weeks I’ve handed over a king’s ransom for tools……table saw, router, shop vac, brad nailer, measuring devices and on and on……..Looking forward to getting down to business. Your channel is a good resource, one that is teaching an old dog new tricks. 🦮 🔨 🪚 🩹 🧰

Good job and nice presentation. Well done.

Wait, So you don't actually have to screw the acrylic plate to the 3 screw holes? You can just drop the router in?

I see that Bosch offers a left side extension (TS1008) for the 4100 table saw. Do you have any experience with this extension to know if it is worth the money?

It’d be nice if you had some dimensions of the height and width as you went

Can you do micro adjustments straight from the box? Or did you have to purchase some after the fact?

Guys like you need to keep making videos like this, so don't stop. Thank you again!

Thank you!

Pray tell, what do LED’s have to do with causing or not causing short circuits and less problems? And why would you mount the receptacle facing up and more susceptible to collect water?

Hello How square is it ? For example should you recommend it to make a chessboard with end grain ? and still perfectly aligned ?

I’m liken how your ideas are for small workshops

Nice job, great ideas

Fantastic idea, thanks for sharing!

I would paint the new cover. After watching your video, I now know how I am going to change my dust issues with my old Delta bandsaw, and it will have paint to match the rest of the saw.

Paint it…the rest of the saw will appreciate that…😎

Excellent video Greg, thank you. One question, I need to also replace the top of the cabinet (before installing the new sink) which has delaminated and looks pretty bad due to water damage below the Formica top laminate. Do you have a video to do that?

I have your Bandsaw's baby brother ( 1953 10" ). I have been looking for a riser block but can not find one 😞

AWESOME STUFF! Looks very affordable too.

Love this! You do woodworking like I do. Mistakes happen. Most content providers “never” make mistakes, but you have the courage to show the real process

Very nice, thanks so much for this video. Very informative.

A solution without a problem. Just use the fuse.

I was waiting for it... 😬 Kudos for not trying to sugar-coat it. We've all been there. Thanks for the vid!

I got one and love it. Recommend you put threadlocker on the allen screws on the adjustment end as well as the spring-loaded adjustment pin in the back. They will be wanting to back out until you do.

congrats . . . did you consider a long slot opening for dust collection vs the round port ?

Getting more into diy projects. Great informative vid. I'm happy to see them side by side. Thanks you sir

Missing transfer on this pic

What amp fuses?

Great little build! I didn't understand the "ground to the box", did you mean, one ground wire went to the outlet in the box, er?

Wow, very intelligent idea to move the router so it pushes into the fence....thanks a lot. I am lucky that I saw this video.

Hey Greg! Glad to see you on here and in CV! There's still a group of us coming for the annual CV trip at the end of the month. Charlie and myself are both thinking about getting property out there. Although he's thinking in town for the water and power and i would like to be further out. Thanks for the great videos and maybe we'll see you out there again sometime, for some prairie doggin!

Thanks for video sir. Does the unit come with the Bosch offset router wrenches or do you have to buy separately?

The 6 1/2” has a slot to hold the Allen wrench.

Does anyone know if these tables would work for a dewalt router?

Awesome stuff. If you want to learn this trade, this is the place to start. And I’ve been doing this 40 years.

Great design, I've been looking for something similar

Yes, Gregg the cost for the system would be nice to know even if just an estimate, we have property out there also and are looking at adding a site for summer vacationing ourselves. Please keep the videos coming and you might want to add the name of the company that put in the system.