Відео

Thanks alot. My brake booster was stuck. I heard. Now. You got yours out and tried your way worked. Good

How to reset/relearn the throttle body: Turn the key to the "on" position (Do not start the engine). Wait until the check engine light (yellow light) starts flashing and then stops flashing. Once it stops flashing, press the accelerator pedal slowly all the way to the floor and then slowly release the pedal to the top. Take about 2 to 3 seconds on the way down, hold for 1 second at the bottom, and 2 to 3 seconds when releasing it. Then turn key to the "off' position. Hold for 1 second in the off position and then you can turn the key to the start position and start the engine. The lightning bolt should be off now. For how long? That depends on the problem that's causing the light to come on.

The instructions are all wrong. Patient is much easier than shown on a Kia soul 2014 All it takes is a little wiggle room to detach light bulb. And to attach the lightbulb to the wiring. There’s no O-ring.

this helped me so much, thank you and im sorry for your loss ❤️🙏

those 8mm screws have very shallow heads, hard to keep the socket engaged a wobbler helps, lots of sharp edges i used welding sleeves to prevent cuts, the next one to go will be the vent door shaft breaking - a poor design with weak material used

Tps

Really appreciate the comment at the end about putting the bolt back in the rear alternator housing prior to getting it fully aligned. I ended up putting getting the alternator back in and rotated it, then put it back in before aligning it. Saved it from dropping out and making it harder to turn the alternator around.

Great video! My car has been broke down and I need to replace water pump and starter but after watching your video and a couple others, I really feel like I can do the pump. I’ve had all the parts over a month. Just not sure about having tools etc

It’s nice and very thin unfortunately it doesn’t show both front and side simultaneously like my borescope of the same cost.

I literally came here just to find out what the app was because I don’t have the book…. Nice.

How about replacing with led light is it done the same way thanks

Thank you very much

Please help!! There’s no videos on mercury sables !! My alternator died so I replaced the alternator and the cat started do and the belt flew off someone help please

what did you used to clean the surface before putting the new water pump in

make sure the pathways going to and from the ERG are not clogged.

Gonna be doing this in a month or 2. Car has always damaged the battery every year or 2 as soon as the weather gets cold. Alternator has always tested fine, but got a new battery Saturday and now the alternator is testing bad as well. Just going to keep the car on a battery tender in the meantime

Nice work

Thank you cuz the last time I had lights went out they charge me $217 for nothing Thank you so much

Thanks for video

Hey, man, thanks for the video and explanation. Very Helpful! I got the same problem in my 98 and have had it tanking fuel mileage and engine power for years. One question though, did it fix the high idle?

Some good eating there, Mat! I usually chop up a little onion and celery in mine but it doesn't really add that much.

Did your check engine light or red lightening bolt come on your dash?

Fat is white, not pink

Wow, this Sloppy Joe recipe is a game changer! 🤩 I love how simple and quick it is-perfect for a busy weeknight when I don’t want to spend hours in the kitchen but still want something delicious and comforting. I’ve tried a few Sloppy Joe recipes in the past, but this one really takes the cake in terms of ease and flavor. The ingredients are basic, yet they come together so well. You don’t need anything fancy, just stuff most people already have in their pantry. One thing I really appreciate is how customizable the recipe is. I used ground turkey instead of beef to lighten it up a bit, and it turned out just as tasty. I also added a little bit of smoked paprika for an extra depth of flavor, and wow, it really made a difference! The sauce is perfectly balanced-not too sweet and not too tangy. I love how you can adjust the sweetness or acidity depending on personal preference. I did add a dash of hot sauce for some extra kick, but that’s just me! The step-by-step instructions were super clear, and I love how you kept everything straightforward without any complicated techniques or obscure ingredients. It makes this recipe accessible to anyone, even if they’re not a seasoned cook. I’m all about meals that don’t require a ton of prep but still taste amazing, and this definitely fits the bill. I served my Sloppy Joes on some toasted brioche buns, and they were the perfect match-crispy on the outside but soft on the inside. It’s such a fun, casual meal that’s great for feeding a family, and I can totally see myself making this for a quick dinner with friends or even at a party! The best part is how easy it is to make a big batch, and the leftovers taste even better the next day. This recipe is definitely going into my regular rotation! Thank you so much for sharing it! If anyone’s on the fence about trying it, don’t hesitate-you’ll be glad you did. Looking forward to more awesome recipes from you! 🍔✨

Sweet I'm doing that

Thanks for this. I didn't understand how to actually wrestle the driver's side light assembly out but finally figured it out. Just keep rockin' it! Lesson in life there:)

I have a 300 that needs that, Thanks

Will the crankshaft sensor prevent fuel pump from turning on? Also I changed the fuel pump and the relay

What ribbon cable was correct replacement?

Why is the drivers side so much more difficult? 🙄😔

You’re doing me a great service. I can’t afford to pay someone to do it for me so, I sure appreciate you!! I 🫰🏽hope you have more how-to vids on ur channel for my 2014 Soul (Red Zone) I just found you & sub’d to your channel!! TY!!!!🤩

Thank you for your video Ii didn't pass my emmision test because my ob reader did not read. After watching your video, I was able to replace the fuse and all is good now. I just have to go get it retested, so thanks again

I have a 2000 Ranger with the 3.0 v6 what scan tool ( model number ) ? Can it read ABS codes ?

Nice video, my wife's car is the same setup and I couldn't find any info on it other than the standard bulbs.

Nice job. How did your wife like it?

Maybe doing a few passes would do the job?

What size wrench did you use?

Good video thanks

What did this ended up being?

👍🏻

How long does it take

Took my headlight out and it had two o-rings stuck to it. Meaning they forgot to remove it the first time they replaced it. 😂

Thanks I have an 06 300C, Thai is very helpful

I'm one who can definitely appreciate some ShadeTree information.

I’ve done this with the lower blend door and now my direction of air is off. For instance if I have it set to defrost the air comes from the floor or if I have it on front vents it comes out of top dash I can’t get it calibrated back right. Same car btw 06 300

U left the old sensor on the connector it’s not a different connector

Thanks man

Nice video ty

Just what I needed! I am sure glad I did not have to remove the passenger seat and the under-dash parts just to access this valve. Thank you so much for this video! Liked and subscribed!

Bout to get ready to do the same very helpful video hope it goes smoothly