Відео

I believe you didn't set zero and you should have get laser bore set zero first before live round test it red dot and magnifier not supposed be there real scope supposed be there you will see difference between micro scope with red dot set up and find out sent to best company zero set for you and see the results

I put my armor on so you will know that

I just installed this same handguard today, (I waited a year for MW to have them in stock). I went with the 'remove FSB & flash hider' route since I had already the tools. Looks great and the lock-up seems pretty solid. Hope to take take it out next weekend for a test drive.

Concur with the sweet paint job. Probably the best I've seen and I'm a bit jealous as I've got some good ones but not that good. :)

I've been getting slam fires when i take my SKS out to the range not to crazy but it's a bit more frequent. I even took the firing pin out and cleaned it made sure the channel was good too. I put it back together it even rattle's when i shake it. Still getting slam fire i think Ima have to replace it :)

Thank you so much this was driving me nuts 👍🏻

The constant umm… just get to it bro! Bye

Think Ill stick with Nelson Precision upper. More expensive but a better investment.

Where you get the mag ??

Good video brother. Get Inshot pro it’s only 40 or watch the 30 second add get rid of their logo. I use the editor that’s the only reason I noticed it lol

po1 has the rail.

Had mines for 3 years. Work flawlessly. Ppl talk sm ish until I get down with it now they want one.

Try the oem mags

The PCR is a great gun!!! I have had mine for 3 years now and I did some internal work myself and you wouldn't believe what changing out a few springs will do. I changed out the Hammer spring, the trigger spring, upgraded the hammer and changed out the seer spring (which wasn't easy) but well worth it. When I got my PCR, the DA trigger pull was over 11 lbs. and SA was around 5 lbs and the trigger reset was same as yours. When I changed the above mentioned springs, my DA went from 11 lbs down to 7.5 lbs and my SA dropped from 5 lbs down to 2.5 lbs. Reset is also super short. I would highly recommend changing out the springs on the PCR. It's a gamechanger.

Put the stock extractor back in.

Try shooting it without the lite. The X300 U- B model was originally designed for steel frames and if tightened too much on a polymer frame can cause those same malfunctions, seen it many times. Same reasons you mentioned too. Give it a try

I've got the same stuff on my Geislle Superduty... I like it so far.... I had only Magpul before that... that's good stuff too tho... but I'm very happy with the B5 systems furniture on my Superduty

What a beautiful place to go shooting and doing the things dude. I never get snow where I live, and I'm always envious of people who are out in the snow shooting guns it looks like it would be so much fun. One day ill have some land in the mountains and will do the same thing. Just found your channel good stuff

Sorry to be that guy but can you show us a video of you attaching the brace adapter?

I wish I could ride like that I can only ride the little pit bike

Nice po1

Ive got one. In my rotation.great gun,great trigger

Mine doesn’t have the button I didn’t know they had variations of this stock.

The worst gun review ever. Forget this channel 3:01

They don’t have 14.5 only 13.7 and 16 and 10.4

What about the rails if they only have 13.7 can a 14.5 geissele hk .rail work ? Don’t seee how unless 16 is cut down so then pin weld

The M4 mark is on the front of the upper where the gas tube enters the upper.

Anyone else get a barrel mounted sling swivel (13629 marked) and/or a Rosco manufactured Barrel? M4 marked upper?(Midway usa circa 2019)

today i added kchilites ditch lights on my 3rd gen tacoma. I got everything wired up in the engine bay and ran the dual button cable through firewall. Today i ordered the caliraised tall dual switch. Its my first time that i will be installing a switch into my tacoma. Whats the best way to open up that buttons console? To remove that tall space plain button and install the new one.

Waiting for your review. Been thinking about getting the Springfield. I've handled it at the local Shoot Straight and it feels great in the hand.

The carry handle, front sight post, and free floated picatinny handguard on a carbine lower, is PEAK rifle aesthetics, you have some good taste

Cool gun

Man that’s so funny we both release CZ videos on the same day. I picked up the Shadow 2 compact a couple months back as well. Man the grip fits me perfectly. Might snag a P-01 next. Sucks about your IG account… that crap sucks. I do dig the off-road stuff though. Need to do some more of that on my channel. I’m way overdue for a Raptor update.

I've been looking at these, and the Girsan MC P35's. I'll have to check yours out in person!

Man, it’s hard to follow with how slow you talk in this video

Their instructions are garbage.

Good video, I just bought one yesterday and don’t know a whole lot about side by sides, needed one to haul to the hunting club so it will be easier to get a deer out of the woods because some of the areas they like to run to are wet areas that I wouldn’t want to take a truck into. And also to help carry corn to feeders, our feeders are all down narrow pine rows a good ways so it would help having to get 5-6 bags to all of them.

Did you up the torque on the barrel nut?

Jacket kinda sucks huh? I’m not thrilled with it. Maybe better with a 300 BO barrel or 308

Built my own too. Criterion “core” barrel is the best. 350 and you can’t buy a better barrel. Literally up to 60,000 rounds. CHF CMV crime lined. I want a BCM upper and aero lower. Now only the upper being Aero is the lacking on mine. Finally got a eotech with it. It’s a 3x. 3-0 version. Had a single 1moa dot and it sucked with no circle. ⭕️ so I exchanged real quick. Adjustable aero gas block and a M4-72 Severe-Duty Compensator or a Hypertap. I keep switching and am not sure I want the blowback. I got to zero it at 36 yards.

I KNEW I RECOGNIZED THAT BUILD! Saw it on reddit not even ten minutes before I found this vid.

I bought a bcm upper with cold hammer forged barrel and it’s not that great. Wonder if I got a bad one. Groups are not tight. My ddmv7 lw however. Very tight!

1st blood❤

Hey sir, would this mount work on any red dot?

Seen to many problems with these. Cloud needs to make a product and stick with it. They have to much changes always and bot for the better

A little thick in the pocket

Thanks for giving a walkthrough on the Bandit and rocking our gear!

How good does it cycle shooting subsonic ammo or something like the cci quiet rds using a sclincerco sparrow. Using factory slide I haven’t found an ammo yet my 44 wouldn’t cycle, just curious with the added weight of the metal slide/the junk polymer would do. Thanks for any advice in advance 🤙🤙

l'hai modificata? la mia funziona perfettamente con tutte la cartucce High Velocity e ne ho sparate quasi 1000 senza il minimo problema (CCI ,Remington,Aguila,ecc...) E' superlativa!

Hello, Are you interested in testing our products? We would like to invite you to test the A-Arm Bushing Kit for your 2022 Polaris ranger 570 full size