Відео

Use the second link , it’s working and stock available

@@2750nav Thank You for your reply. But it is out of Stock🙆‍♂. Let me wait for it🙂.

The OEM spec sheet suggest to use only with 3S. emaxmodel.com/collections/gt-xa-xt-series-motors/products/gt2215

10x4.7 Prop @26A and 3S Battery = 1.25 kg static thrust

But i want to use this with 4s for higher speed of my flying wing

2200mah 25c 3s Wolfpack, during this flight around 6.5 mins flight time I'm getting. Still plenty of juice was left. I will 8mins + we will get.

@@2750nav loved your work bro...

It's very easy , where are u struggling ?

@@2750nav can we talk over whatsapp?

I took permission from them. Check my description I have enclosed the details. You can talk to them. If they agree you can use. I took permission from both.

@@2750nav Sure bro. Thank you so much for your reply 😊👍

You can always post the issue you are facing here , to my best knowledge and experience I shall try to solve it

Welcome , I'm glad my video helped you.

Frsky S6R I'm using.

FrSky S6R is a receiver which have built in 3 axis stabilization

Which transmitter and receiver you are using ? I suggest you calibrate the FC (standalone) 1st using clean/beta flight , then sync the FC with receiver depending on your receiver type(sbus/pwm/cppm). Painless360 have made 9 Part series for Seriously Pro F3 pls follow those videos 1st on youtube with patience. And come back to me with your detailed problem.

What EDF are you planning to use ?

With 3s highly unlikely, thrust to weight ratio should be more than 1 Esp for low aspect ratio designs, for gliders it can be 0.8 Your bandit is clearly low aspect ratio platform , you will get best results with 6s. And a high rated ESC. Check for EDF manual they will specify the ESC A rating for the reqd thrust.

@@2750nav I M Planning To Use 64 MM 4500kv Or 70MM 3000Kv

@@hazikrabbani3496 you will need EDF that can generate 2kg static thrust , usually 2kg thrust will come with 6s batteries , the AMP rating ESC might be 100A + look for the EDF manual you will find all these details, the amount of thrust it can produce for what Amp ESC rating and what battery. Using two 3s batteries you can make one 6s battery using connector. As 6s batteries are expensive and hard to buy.

@@hazikrabbani3496 70mm and above are best suited edfs for your application

I think SP3 FC has this feature built in. I like this feature , it prevents accedential fly away and improves over all safety.

Mitsutaka Shirasu yes, with 68mm hobbyking 2836kv edf static thrust achieved was 830gms with 2200mah 4s 30c and with 70mm FMS banggood edf o could achieve 1200gms static thrust with same setup. I suggest you go for 70mm FMS as it is economical and weight advantage you get.

I see. What was the max thrust of those EDFs?

Mitsutaka Shirasu the static thrust values mentioned in the previous comment are their max thrust values with 65A ESC

mong nky yes , it has the same effect.

Sam Will move the yaw stick to the left to turn it off.

Sam Will you mean even at 0% throttle the motors keep spinning ?

Mukund Chethan no my issue is it won't arm

Sam Will then u can assign a switch for that using clean/beta flight modes.

Mukund Chethan in beta flight when my battery is plugged in it doesn't show that it's plugged in even though my controller shows the battery

Your mirage is beautiful, give it a good camouflage paint job. Even i have plans of building one in future. What EDF power pack r u planning to using on your mirage 2000 ?