Відео

What happened to the engine? How the new boat compares to the almighty Bayliner 😉?

I just want to chime in as someone who has worked with paints for 25 years. If you're going to tackle this project the right way, so you don't have to worry about it for another 10 years, here's what you need to do: AVOID spray can primers such as enamel, it's pointless. Enamel primers are porous, even 2k urethane primers are porous, and you're just going to let salt water soak right through, all you need is one pinhole. 1. COMPLETELY remove the old paint 2. Prep the metal and leave it with a 180-220 scratch Then, use a two part EPOXY PRIMER. Spray max makes these available in a spray can now Epoxy primer is non permeable and it's literally spray-on glue You want two medium wet coats, then wait a few hrs or even the next day and apply two more medium wet coats Wait about 15 mins or so after the last two coats and apply your base color over the uncured epoxy. This ensures a chemical bond between the epoxy and the base color Wait a fill day to gas out then Clear coat with whatever you want, awlgrip 2k clear, spray can clear ...It doesn't matter. What matters is the substrate applied over the bare metal You a want 2 Part epoxy primer or you're wasting your time.

Merci beaucoup ❤❤❤❤❤❤❤❤

I do the same thing

Quick question,this job can be done with the boat in the water???

Hello whats going on with the videos is everything okay

Great job guys

Now this will be a great replacement for the broken generator in the engine bay. Just wonder if propane would be feasible because mines dual fuel?

I believe that you for got to reinstall the rubber O-ring on the carrier bearing. The props were not retimed either. Merc requires that you put grease on the threads instead of oil. Merc also requires the use of lock tight on certain things. The offset of the tool is not the reason for the different torque spec, it is the length of the torque wrench. Nice attempt and it is a pretty good video. But there is a reason there are certified marine mechanics.

Haha…..the Fun Machine…..! Awesome…!!!

I’ve noticed some gear lube oil leaking from the lower-most holes of the side water pickup holes on my Mercruiser stern drive. So it doesn’t appear to be a prop seal leak. The leak seems to be above that. Do you have any idea as to where this kind of leak usually occurs?

My plywood base is starting to rot. Thanks to this video, hopefully I can take it apart and take it to an upholsterer, and have them put it on some kind of plastic instead of wood.

This guy knows to stay away from Budlight 😂😂

What about that there is no real Earth when not connected to actual shore power? Is it not dangerous?

I'm doing my 1988 2455, wish I knew about the L bench backrest screws were in-between the padded panels, others were gone due to rot, managed to get enough measurements to rebuild a new base, with some changes, like ease of assembly/dis assembly

........ Six days and you still have cold beer ......... I normally run out after three days .....

What year is it?😮

Why u made hole?😅

If I could like this video more than once my thumbs would be numb by now. MySupRunnethOver and I absolutely love it! 😂😎🤣💯🤣💯🤣👍🏾🤣

I have a 3.9ft draft. I see other bigger boats in the harbor, but how are things generally at low tide for a 50 ft boat with almost 4 ft draft?

Awesome video, awesome job detailing the trip!

When applying Teflon tape it is imperative that you apply the thread in the same direction as the threads to tighten. You put the tape on backwards so when threading it in the tape is dislodged and doesn't provide the same level of sealing.

Did i miss you checking the risers for blockages? That is often the cause of overheating.

As always great times can't wait for the next trip out.

great video thanks

What cooler model is this?

Great vid. Beautiful day out there. This is why we boat, right? 👍🤙

I have winterized my boat for years but this one side drained pink and the other clear ?? I thought thermostat but then both sides would be affected . Any thoughts ?

Love your passion for your key and sandbars 👍 Enjoy, and thanks for taking us with you... 🤙

That water colour is stunning! 💦 Thankyou for showing such a beautiful place.... 👍🤙

Lovely quiet, sunny, calm day with friends... Perfect 👍🤙

That water at the lighthouse in Islamorada is unmistakable. Bahamas is just a very short boat trip away when you are at the Keys. Great video my brother. Big hugs

Part 2 sequel is awesome! You guys really know how to kick it up and enjoy your day at the sandbar. Enjoy it all in good health. Love you guys. Big hugs

Hey Jorge, it looks like you had an awesome day!

Put a little oil inside to get old seal out and around the new one to get in

Good video let's meet up down in the keys. My wife and I come out of Fort Lauderdale and have a Benteneau Antares 9 almost the same boat as yours

Rath Hills

Awesome 🎉

Thanks 😊

thank you for sharing

Brother, what I love about your videos is that I can sit back, relax and feel like I’m out there with you. Awesome music and awesome info on alligator reef. The visibility was out of this world! 🌊🤙🛥️

I saw you on a different video with your 2 different boats and now I am a subscriber thanks so much : )

Beautiful Alligator reef Saludos

We love alligator reef, we cant wait to get back down there!!

Looks like a great day. We love Alligator Reef. See you soon at Tavernier Key!

Another relaxing one! Alligator Reef was absolutely pristine 🤩 🌊 What a beautiful boating day.

What camera are you using? Does it have a polarizing filter? The colors are amazing!

Alligator reef is always on our list when we are in the keys. Great video, thank you for sharing!

What a great video, very educational information on Alligator Reef and as always the beautiful waters around Alligator Reef never disappoint 🙌🏻🙏🏻

Another great adventure in the Florida keys love best it place on earth