Відео

Yes I did. Also sharpened the teeth and cutting edges on the bucket.

Thank you

Lol eventually we will get him one

Man, you can't catch a break with that thing. I am starting to wonder if I just got lucky with mine. That sounds like a good time. I am hoping sometime in the future here to have a dump truck, but other priorities are coming first atm. Are you guys starting a project or just having fun and messing around with them?

@@RCExcavating update lmfao, I changed the seals got it back together and checked the fluid it wasn't down really to speak of after some actuation, and I ran it at my buddies for 2 full battery cycles, didn't cut out once, and didn't leak at all, bone dry the entire time, I'm somewhat happy now knock on wood. lol

Knock on wood hopefully it continues lol

That sucks I am sorry to hear that. I wonder if you would be better off buying your own rather than using theirs?

Thank you

Lol, that would be a lot faster, but way less fun. He is always up to something the little guy never stops.

Hopefully it is just a small hiccup for yours and you will be good to go. I think I currently have 65 waiting to be uploaded lol.

I honestly don't know. I have a few more videos in this series that just have to be uploaded. It is finished. I just have to get them on the channel.

My son has one of them as well but the board is shot. When he gets a little better with the RC stuff I will fix it for him but it would just sit for now. The 1592 was the machine that got us into this.

Oh ya he loves being out there. The bottom of the hole was about 2 feet down the hole was about 4 feet wide at the end.

Man that sucks I am sorry to hear that. I haven't had any leaks or any issues with mine like that. Hopefully they are sending you the board free of charge. Still a bummer either way.

@@RCExcavating I'm hopeful mine won't have any leaks, but yes they are sending it free of charge, I am bummed because it is hell as heck to play with!!!

Ya they definitely are I think for the money probably the best starting hydraulic excavator. We'll also you just got it so sucks to have it down that quick.

Not much on this thing. It has been great so far knock on wood. Hydraulic fluid changes, cleaned up the dirt from the inside by the boards, and tightened a couple screws.

Thanks for the sub. Hope you enjoy.

@@RCExcavating wow. Id think it would be more. Seems simple enuff for me. Thanks,🙂👍

@mcemtpockets1775 To be honest I expected more as well. I don't know if I just got lucky especially with the hard use that it gets.

Not yet more videos shot just not uploaded yet

This has turned into a huge project. Had to widen the hole to get in deeper with the machine. I finished the rock on the first video you watched it's just not uploaded yet.

@@RCExcavating take ur time and have fun! I like it man!

Thank you

Thank you

Nice enjoy.

Knock on wood it has been great. 2nd year and all I have done is routine maintenance. The only thing I thought had going wrong was ended up being a button on the controller that I accidentally pressed. Just did a 2 hour dig session with it today still on the original battery as well.

@@RCExcavating well I think I'm going to pull the trigger on one. Thanks for the input man I've been researching the hell out of them

@@RCExcavatingwhat have you done for maintenance?

@SavageX125 I did a lot of research as well and didn't want to build a machine. The only knock I have is weight, but that costs a lot more money. Maintenance has just been fluid changes tightening a few screws that loosend up and cleaned the dirt from the inside of it.

I think they are around 1300 US now.

He needs a raise for all his hard work lol.

Thank you

Thanks 👍

Thank you

I don't know what they run stock but I did turn the pump up as high as it would go.

Mine has been very reliable so far. I have been very happy with mine. The only issue that I have is it seems to over heat once in a while during the hot days. The pump kicks out for a second but then comes right back on. Doesn't do it when it's cooler outside.

@@RCExcavating Excellent. Thank you.

It's listed as 1/18th I think

Thank you.

It's fixed it was a button on the controller that I didn't realize controlled the hydraulic pump. It must have got bumped, and it turned the pump off.

@@RCExcavatingwhat button

@@SavageX125 I just put up a post with the Pic. I didn't know how else to get a Pic where you could see it.

Thank you

After tearing the thing apart, it turned out to be an issue with the controller and not the excavator. It was an easy and quick fix once I figured it out.

@@RCExcavating mine stopped as well. What did you change on the remote?

It does pretty good for what it is. 💪

Thank you

No problem 👍

I have enjoyed it so far.

Thank you

Yes it is.

The white one was the one I wanted but they were just coming out when I got this one. So far I have enjoyed the machine. The only complaint I have is it isn't heavy enough for what I do with it. I couldn't afford a heavier machine when i bought this one. The only issue I have ran into with it is it overheats a little on hot days. Once in a while in the videos I went to move the arm to dump and would have a dead stick. This would only last for a second and then it would be fine for a while. This issue went away completely when it was cold outside. I am glad you are enjoying the content and if you get one I hope you enjoy it.

@@RCExcavating Is your machine running at factory settings? I followed the recommendations of a Spanish UA-camr and slowed my machine down to more scale like speeds. I can't say that I've noticed over heating issues with mine here in Gippsland West.

​@reeceisaac556 For the most part it is running on factory settings. I don't really know much about how to adjust all of the settings. I will have to look into slowing it down to see if that helps the overheating issue for next year. It would definitely make it look better for the operating to.

@@RCExcavating Just wanted to let you know that I got it. and that I'm really enjoying it. I'm still not use to the controls, but I'm getting there and having a lot of fun with it.

@Alexis-Catnip Nice. I hope that yours does good for you as well. Me and my son are missing being out digging with it. Everything is frozen here won't be back out till April or May.

Mine has been reliable so far. I think it did have a little issue with overheating after about an hour of continuous use. The pumps are fully enclosed in the back with no real venting to let the heat out. With that being said it didn't really affect it a bunch. For being the entry level machine for hydraulics I am very happy with it to this point.

That,s good to hear, they actually look really well engineered and clearly work well, but the comments on that disassembly vid suggests the opposite, thank you for replying

Thank you. I am glad you enjoyed it.

Been having internet issues. It took 2 days to upload lol.