Відео

I spent many hours adjusting the control torque tubes. Still not done yet, but I have to get away from it. Thought I'd make a video to summarize the current progress. #slingtsi #homebuilt #airplane

I built the center fuselage bottom floor, and connected it to the rear fuselage. I also discuss an issue I ran into when installing the bottom floor skin on the fuselage. #homebuilt #airplane #slingtsi

I documented my entire process for building the front seat's adjust lever mechanism for my #slingtsi #homebuilt #airplane.

Last few weeks, I made some progress on the Sling Tsi fuselage. I put together the rear fuselage, installed rudder cable, laid down the tail harness. #slingaircraft #homebuilt #slingtsi #airplane

I finished sealing the left tank, and installed it onto the wing. There are a few minor things that I still need to do, but most things are done at this point. The whole sealing process is not difficult, but very tedious and time-consuming. I upgraded the factory gasket cork to a better quality one made from garlock 3000 material. #slingtsi #aviation #homebuilt #airplane

My saga of building the right fuel tank. It's a long process, and most of the time is spent on fixing leaks and doing upgrades. Here are the products I used in the process: Thread chaser: www.amazon.com/Thread-Chaser-Repair-Rethreading-Restorer/dp/B0BH8QSHTF Snoop: www.amazon.com/dp/B002N2T3QK Visit my blog: fanfly.dev #slingtsi #homebuilt #airplane #fueltank #proseal

I am waiting for some parts to conduct the right tank fuel leak test. In the meantime, I installed miscellaneous parts on the right wing.

In the last few days I finished a bunch of small misc work on both wings.

I worked on both wings last week: removed al bunch of rivets from the right, and installed avionics on the left. Oh and my fuselage kit has finally arrived! Build blog: fanfly.dev #homebuilt #slingtsi #aviation #airplane #elevator

I built right flap aileron and made some mistakes on the right wing. And I also started on the left wing.

Wing harness is installed, and skin is riveted Build blog: fanfly.dev #homebuilt #slingtsi #drdt #woodworking #aviation #airplane

This is the 2nd week of building the right wing of my Sling Tsi. I installed the right bottom skin. #slingtsi #experimentalaircraft #airplane fanfly.dev

Wing is taking shape! Build blog: fanfly.dev #homebuilt #slingtsi #drdt #woodworking #aviation #airplane

[Empennage] Filling Rivets on the elevator

[Empennage] Elevator Completed

3 ways to shortening rivets

[Empennage] Vertical Stabilizer Completed

[Empennage] Installing Delphi connector to rudder tail light

[Empennage] Horizontal Stabilizer Complete

[Empennage] Working between vertical stabilizer and horizontal stabilizer

[Empennage] Clecoing horizontal stabilizer spars

[Empennage] Rudder Assembly, instruction sequence, and measuring twist

[Empennage] Building elevator counterweight assembly

[Empennage] Kit arrival and inventory

Buidling DRDT-2 Stand

Building EAA 1000 Workbench

Fan's Sling build log - Primer experiments

Pilot's view IFR to Half Moon Bay

KAPC Landing