Відео

Are you not selling a clear flap any longer? We just got one installed in a glass door, and it wasn't cheap. Our dogs won't use it because they can't see through it. How do I get one that is CLEAR! Please help

How did you get morgan freeman's voice? 😜

I got the covers & screws off, but how does the panel come off??? Looks like she just lifted it out, but mine still feels attached somehow 🙄

This does NOT cover the steps required for the through the wall model. You have to take the entire thing apart to replace the flaps. 2.5 hours later I feel completely duped by the "ease" of this project.

It is not necessary to loosen screws by window. I did that and the spring pulled the screw into the track.

Well thank you for that! Couldn't find any info on this procedure and wouldn't have know how to do it.

Exactly!! Why are you making us do your cutting…if we are ordering a specific size it should be cut at the factory. Cheap!!

I don't have a flap but you're gorgeous so I watched the video 😂

Couldn't the tunnel frame just be cut at the factory already

Can the window still lock if it is half way open for the cat window door. Because I was just thinking, what if someone had a tool like a crowbar to lift the window from outside all the way up. Its not much I'd imagine, but enough to stick fingers, or your whole arm threw and untwist the locks.

Always check that you’re not cutting through water pipes or electrical wiring when using a sawzall. It’s so dangerous to just start cutting through walls

Thanks for sharing

This rise looks like 2” high. I like it.

How do I get out through the door after lossing almost 50% of the opening?

impressive

Good to know. I'm way down the rabbit hole on researching dog doors and Endura appears to have a superior product that is poorly advertised online with an exception to their youtube channel.

Really good tutorial!

Wow scary use of the reciprocating saw (Sawzall)...almost guaranteed to cut electrical wires or plumbing. You should always use a hand dry wall saw to cut a hole large enough for your forearm to fit through to feel around for wiring and plumbing. When cutting with the hand saw use shallow cuts to avoid hitting a wire or pipe. In wall wiring is commonly around 12" above floor, so stay clear of that area. If you have wires in the way then you'll need to turn off the breaker, cut the wires and install a junction box mounted OUTSIDE the interior wall. Do not put it out of site inside the wall, which would be huge fire code violation anywhere. When cutting the metal with a jigsaw, use a thin piece of plywood under it to reduce all the metal vibrating. Keep the jigsaw on the surface until you have to lift it. When applying the sealant put on a glove and use your finger pushing slightly into the crease to spread evenly. Oh and keep the sealant from your clothing, she got lucked out it.

I got the side magnets out, but removing the threshold is not nearly as easy as shown in the video. I've tried one end up, one down, both ends up, no luck. What am I missing?

Most simple easy great straight to the GIG thank you

How do you keep your endura door flap from freezing?

What she doesn't tell you........ 1. The screws are not magnetic lol 2. The frame is secured with double sided weatherstripping tape. You will have to pry the frame off without breaking it, clean off the old tape, buy new tape, install new tape to secure door. 3. They didn't send any replacement screw covers. 4. The good thing is the warranty replacement door was fast and easy.

The difficult part is rearranging the spacers, if necessary. They don't go over that at all. Take plenty of pictures before and during the process, if you do it, to help you determine how it all goes back together. Pieces that you can't figure out how they come apart, just pull them apart. I had to use a thin screw driver to start separating them.

Thank you for this! Made it so much easier. :)

I everyone will install it on an interior wall.

talks too fast

Thank you for the great video! I am happy to see that your door is easier to install (example, you can just tighten the screws to secure the panel vs drilling!) than one I just tried to install. I also appreciate the humor…the dog with the weather stripping roll on her nose- very cute.

This is the only video I found that actually helped!! Thanks so much!!

This is very misleadingl If you have a double flap installed you must take off the inside and outside frames and then you have to take the aluminum tunnel off to get to the screws that access the flap itself. The tabs on the tunnel break very easily. I mean they are brittle, brittle brittle. IMHO this is a poor design. Good door but plan an a project to replace the doors.

Its way easier to buy a hale door. The tunnel comes assembled to the interior piece and the entire thing is metal. You can get the interior door and exteriors door in house matching colors. Its self framing. Comes with a 5 year warranty and that covers the flaps too. No i domt work for them i just really like the door.

Are the new glass panels Dual Glazed?

Whete to buy a cat door

Cool, very convenient!

what happened to morgan freeman's voice?

How do you replace the panel on one of your pet doors that fit in a slider..

try sending this to your mom so she can spread it on facebook

Do you have to remove the outside panel as well?

That voice though