Відео

Do you recommend buying this kit? Everything comes pre wired?

Doing an amazing work. Can't appreciate you enough! Amazing series !

Just been looking for a video on Klipper estimator so I was happy to see it mentioned in the summary and installation. You glossed over most of the config documentation though - can you do another video explaining how to set up the config file and what the estimator is supposed to do as I can’t get it to work. Thanks.

WOW, Thank you for the STEP BY STEP guide, this video really helps me to understand how you flash it

Thanks for the tutorial. Great video.

After all your advice about cleaning the build plate, you go and rub it numerous times 😂 Ah sure, we all do it😢

Great video. Also, you exposed your router password. Not sure if you want to keep that up.

To shorten update/upgrade you can: sudo apt update && sudo apt upgrade -y

For those of you who live near a bi-mart you can get 16oz of 99% rubbing alcohol for less than $3 a bottle.

a question please , am getting an error when i send stl from fusionj 360 to creality print any work around that ? thanks

I have purchase a chromaset for my ender5+ but nothing work , all is wrong ... I ask me if I could have your help ? thanks

I really appreciate your thoroughness and how you talk out everything. It'll be so useful when I assemble mine when it gets here.

Ohhhh you’re saying go to my att network interface and look at devices connected to the network. Oh ok. I’m guessing the ip isn’t on the touchpad like on the k1 max.

You mean when you search for WiFi your k2 pops up and you got the ip like that?

I am having trouble connecting my Tronxy X5SA Pro printer to the Creality Sonic Pad. Please help me connect it; I’m going crazy!

No need to go that slow. The only reason for keeping things slow is that you don't want the motor to skip or the filament to slip and that means keeping the back pressure low, but 1mm/s is really ridiculously slow.

good video. I recently installed mine without knowing this video existed. I got it figured out mostly as I've never used klipper and my printer is so custom between the poor documentation of the fact that the 2 z steppers run from the same driver and I have to figure out to use the second extruder and my struggle with setting up klipper on a heavily custom printer it was certainly a learning experience.

Mike, thank you for doing this build, I’m also building a Voron 2.4 and been following your videos.

it didnt work for me . bug screen

Do you have to remove the original smaller screen that comes with the S1 plus?

My Nozzle dose get close enough even at 0.000 it's not even close

Hey, I need to get with you in a week or so. I could use your assistance in setting up the KCM on the sv08.

It's good practice to repeat the test after changing the rotation distance / e-steps so you can see if any further adjustment is needed.

Thats great but why bother at all when the original KAMP does all this and more without all the extra steps?

ilk beğenen ben oldum :)

no cam though

Be great if you can test out the profile on orca slicer and let us know how it goes. cheers

I have one Mike, they are really nice. What I use it for is to set my Z offset when I'm printing stuff like ASA or ABS. That way i dont have to open the door and have the smell come out. I built an enclosure around the printer. I cant get to my touch screen so I use this. I dont think there is a way to use the camera on it. If you figure out how to update the firmware that would be nice to see.

I'm having a problem using Mainsail with a BTT SKR Pro 1.2 where no matter what I set for x,y probe offsets the printer will not honor my probe offsets. I can set 10 or 100 for x and y and the print head is directly over the center of the bed while it homes as defined by safe z home. it's driving me crazy. The BL touch is definitely working.

You did t read the instructions well enough. You're supposed to have heated both the nozzle and bed to their normal temps before running any tests, and keep them heated during the testing process. Self-correction. A second reading sees that it says "if your printer is enclosed". My mistake.

everytime i get a used printer i find myself at your channel, I appreciate all the work you do, for real. the mercury 1.1 builds have helped me tremendously. Cheers!!

can use for BLTouch ?

Hi :) Is there any way to acces Klippe based printers from a pc ? Like Simplify3D or alike ?

the blue pad on the cb1 is a thermal pad. its used to transfer heat from the cb1 to the heatsink. you should install it. it is NOT an adheasive

Garbage audio, no idea what you need to do about it though I'm afraid.

Thankyou for you time. Much appreciated for new guys

Thank you fren.... Connecting was doing my nut in, so this was what I needed.

I see your line width setting is 0.5. Are you using a 0.5mm nozzle?

you don't need to install kamp, raw klipper has the adaptive meshing in it for a little while now and you already set up the purging

will this work with an ender 3 pro v1 screen and btt skr mini e3 v2?

will this work for the ender 3 pro v1 screen?

Thanks Mike, for this explanation.I was looking for this as already indicated, going to give this a try. thanks for your help in this.

Hey Mike, great coverage on this simple tweak. Could you cover how to set up and tune the "Small Area Flow Compensation" & the "Adaptive Pressure Advance" features in Orcaslicer?

Отличное видео.

Just in case I'm the viewer you mention, I was talking about the adaptive pressure advance, not this. Though this did give me some options I didn't know before.

Does Anyone have a printer.cfg file for the x1 with the waggster mod?

I recently switched from cura to orca slicer and your videos have helped with the transition. So thank you for that. I have a VERY weird issue that I cannot figure out though. When I slice the volumetric flow test for my anycubic kobra 2 the straight lines are perfect but on all of the 180° bends there are gaps in the lines. It looks (in the preview) like it is literally stopping extrusion for short periods of time. Once the bend stops the gaps disappear and the layer is perfect. It doesn't do this with ANY of my other printers and I am baffled. Every other print is fine but I can't run the volumetric flow test for some reason.

Wow.. total junk... Tried to connect the sonic, and it first bricked my printer by incorrectly directing me to update the printer but not the display. Had to disassemble the display and manually flash it to unbrick the printer. The the printer would update. After all this the Sonic pad still will not connect. Creality should be ashamed for the piss poor products they ship.

Hello, THanks for this, can you make a video for Mainsail Adaptive Purging how to setup this.

Hello, does the screen recognize you or not? I want to buy version 2.0, you have 3.0, it will be the same, right?