MasterCAM CAD
MasterCAM CAD
  • 166
  • 277 488
Mastercam X5 || Drill Cycle Explanation
Mastercam x5 drill cycle explanation.
fixed drill (counterbore) , fixed drill with delay, periodic drill cycle (peck drill) , high speed periodic drill cycle (chip break drill)
basic machining explanation on Mastercam X5. please accept my apologize if you found any mistake on my video. feel free to correct it by write any comment..
and dont forget to like, share and subscribe.... thanks
..................................................
penjelasan singkat tentang siklus pengeboran (Drill cycle)
yang dibahas di video ini adalah fixed drill (pengeboran langsung), fixed drill dengan jeda, peck drill (pengeboran periodik), chipberak drill (pengeboran periodik kecepatan tinggi)
mohon maaf apabila ada kesalahan dalam video ini. apabila ada hal yang harus dikoreksi, tolong tulis di komentar..
dan jangan lupa untuk like, share dan subscribe bila channel ini bermanfaat..
makasih
mastercam , mastercam tutorial , mastercam tutorial machining , cnc machine , smk pemesinan , mastercam x5 tutorial , mastercam 2023 , mastercam 3d programming , cad cam tutorial , drill , cnc milling , drill cycle , mastercam begineer , mastercam untuk pemula ,
Переглядів: 246

Відео

Mastercam X5 || Basic Milling Example || Paralel milling Cavity (EXPLAINED)21:07Mastercam X5 || Basic Milling Example || Paralel milling Cavity (EXPLAINED)
Mastercam X5 || Basic Milling Example || Paralel milling Cavity (EXPLAINED)
Переглядів 291Місяць тому
KHUSUS PEMULA.. hehe.. video sebelumnya : ua-cam.com/video/i6vyGmfYfaQ/v-deo.html basic machining and simulation on #mastercam X5. please accept my apologize if you found any mistake on my video. feel free to correct it by write any comment.. and dont forget to like, share and subscribe.... thanks .................................................. pemesinan dasar dan simulasi di Mastercam x5. m...
Mastercam X5 || Machine Simulator12:07Mastercam X5 || Machine Simulator
Mastercam X5 || Machine Simulator
Переглядів 308Місяць тому
Mastercam X5 Machine Simulator halo gaes,, Di video kali ini saya akan menjelaskan sedikit bagaimana cara menampilkan fitur simulator mesin di mastercam x5 dan cara penggunaannya. semoga bermanfaat, jangan lupa like dan subscribe... :) apabila ada kesalahan, mohon maklum dan koreksi aja dgn cara tulis di komentar.. makasih visit Facebook : web. donimcx5 Grabcad : grabcad.com/doni.af...
Mastercam X5 || Basic Milling Example || Paralel milling II (Core / Boss) #mastercam17:35Mastercam X5 || Basic Milling Example || Paralel milling II (Core / Boss) #mastercam
Mastercam X5 || Basic Milling Example || Paralel milling II (Core / Boss) #mastercam
Переглядів 9693 місяці тому
basic machining and simulation on #mastercam X5. toolpath used : paralel mill, pocket mill, flowline mill. please accept my apologize if you found any mistake on my video. feel free to correct it by write any comment.. and dont forget to like, share and #subscribe.... thanks .................................................. pemesinan dasar dan simulasi di Mastercam x5. mohon maaf apabila da ke...
MasterCam X5 || 3D modelling || How to create pocket on a cylinder surface using #mastercam x515:35MasterCam X5 || 3D modelling || How to create pocket on a cylinder surface using #mastercam x5
MasterCam X5 || 3D modelling || How to create pocket on a cylinder surface using #mastercam x5
Переглядів 7004 місяці тому
hi guys, on this video i will show you how to create a pocket on a cylinder surface using #mastercam x5 don't forget to like and subscribe thanks... :) . . . . . . . mastercam x5 , gambar teknik , smk , autocad , solidworks , cad , cam , cnc , pemesinan , mastercam tutorial , gambar teknik mesin , fusion 360 tutorial , freecad tutorial , 3d modelling , mastercam tutorial , mastercam tutorial , ...
MasterCam X5 || Cara membuat Etiket Gambar A4 🇮🇩12:43MasterCam X5 || Cara membuat Etiket Gambar A4 🇮🇩
MasterCam X5 || Cara membuat Etiket Gambar A4 🇮🇩
Переглядів 3245 місяців тому
cara membuat etiket gambar A4 di #mastercam x5.. halo gaes,, tutorial kali ini kita akan mencoba membuat etiket gambar A4 di mastercam x5. ini hanya sebagai contoh aja ya, barangkali ada yang membutuhkan tutorialnya, khususnya untuk anak-anak Sekolah SMK.. semoga bermanfaat, jangan lupa like dan subscribe... :) apabila ada kesalahan, mohon maklum dan koreksi aja dgn cara tulis di komentar.. mak...
MasterCam X5 || 4 Axis Milling Example || Parallel to Multiple Curves and Swarf Milling17:59MasterCam X5 || 4 Axis Milling Example || Parallel to Multiple Curves and Swarf Milling
MasterCam X5 || 4 Axis Milling Example || Parallel to Multiple Curves and Swarf Milling
Переглядів 1,8 тис.5 місяців тому
another #mastercam x5 4 axis cnc milling programming exercise toolpath: 4 Axis Parallel to Multiple Curves 4 Axis Swarf Milling .STEP model : grabcad.com/library/random-model-14 please accept my apologize in advance if you found any mistakes on my video. feel free to correct it by write any comment. and dont forget to hit like button, subscribe and share to your friends. thanks..... latihan cep...
MasterCam X5 || How to change Background color, line color, line width, line style4:36MasterCam X5 || How to change Background color, line color, line width, line style
MasterCam X5 || How to change Background color, line color, line width, line style
Переглядів 5496 місяців тому
how to change background color, line color, line width, line style in #mastercam x5. 00:19 - Change background color 01:55 - Change line color 03:18 - Change line width 03:47 - Change line Style don't forget to like and subscribe,,, :) . . . . cara mengganti warna background, warna garis, ketebalan garis dan jenis garis di mastercam x5 00:19 - Mengganti warna background 01:55 - Mengganti warna ...
MasterCam X5 || 5 Axis Milling Example || Morph Between 2 Surfaces12:03MasterCam X5 || 5 Axis Milling Example || Morph Between 2 Surfaces
MasterCam X5 || 5 Axis Milling Example || Morph Between 2 Surfaces
Переглядів 9306 місяців тому
another #mastercam x5 5 axis cnc milling programming exercise toolpath: 5 Axis Morph Between 2 Surfaces please accept my apologize in advance if you found any mistakes on my video. feel free to correct it by write any comment. and dont forget to hit like button, subscribe and share to your friends. thanks..... latihan cepat programming mesin cnc milling 5 axis menggunakan mastercam x5 mohon maa...
MasterCam X5 || Quick Programming Exercise18:06MasterCam X5 || Quick Programming Exercise
MasterCam X5 || Quick Programming Exercise
Переглядів 1,3 тис.7 місяців тому
another #mastercam x5 cnc milling programming exercise 3d model download : grabcad.com/library/3d-model-61 toolpath: facemill center drill drill pocket mill 5 axis swarf mill please accept my apologize in advance if you found any mistakes on my video. feel free to correct it by write any comment. and dont forget to hit like button, subscribe and share to your friends. thanks..... latihan cepat ...
MasterCam X5 || UnderCut Mill Example13:37MasterCam X5 || UnderCut Mill Example
MasterCam X5 || UnderCut Mill Example
Переглядів 7617 місяців тому
MasterCam X5 || UnderCut Mill Example
MasterCam X5 || Pocket Island Facing Mill Example5:49MasterCam X5 || Pocket Island Facing Mill Example
MasterCam X5 || Pocket Island Facing Mill Example
Переглядів 5458 місяців тому
MasterCam X5 || Pocket Island Facing Mill Example
MasterCam X5 || C-Axis Lathe Example9:16MasterCam X5 || C-Axis Lathe Example
MasterCam X5 || C-Axis Lathe Example
Переглядів 4878 місяців тому
MasterCam X5 || C-Axis Lathe Example
MasterCam X5 || Lathe Example || Inner Thread7:20MasterCam X5 || Lathe Example || Inner Thread
MasterCam X5 || Lathe Example || Inner Thread
Переглядів 4208 місяців тому
MasterCam X5 || Lathe Example || Inner Thread
MasterCam X5 || 4-Axis Mill Example || Morph Between Two Curves9:29MasterCam X5 || 4-Axis Mill Example || Morph Between Two Curves
MasterCam X5 || 4-Axis Mill Example || Morph Between Two Curves
Переглядів 1,3 тис.8 місяців тому
MasterCam X5 || 4-Axis Mill Example || Morph Between Two Curves
MasterCam X5 || Lathe Example || Face Groove9:04MasterCam X5 || Lathe Example || Face Groove
MasterCam X5 || Lathe Example || Face Groove
Переглядів 1,2 тис.9 місяців тому
MasterCam X5 || Lathe Example || Face Groove
MasterCam X5 || Pocket Facing Example5:37MasterCam X5 || Pocket Facing Example
MasterCam X5 || Pocket Facing Example
Переглядів 1 тис.9 місяців тому
MasterCam X5 || Pocket Facing Example
Mastercam X5 || 3D modeling #72 || Random object (helical cut)8:12Mastercam X5 || 3D modeling #72 || Random object (helical cut)
Mastercam X5 || 3D modeling #72 || Random object (helical cut)
Переглядів 5769 місяців тому
Mastercam X5 || 3D modeling #72 || Random object (helical cut)
MasterCam X5 || Open Pocket Milling Example4:23MasterCam X5 || Open Pocket Milling Example
MasterCam X5 || Open Pocket Milling Example
Переглядів 1,2 тис.9 місяців тому
MasterCam X5 || Open Pocket Milling Example
MasterCam X5 || C-Axis Contour and Drill From Solid Model (.STP) 210:01MasterCam X5 || C-Axis Contour and Drill From Solid Model (.STP) 2
MasterCam X5 || C-Axis Contour and Drill From Solid Model (.STP) 2
Переглядів 1,7 тис.9 місяців тому
MasterCam X5 || C-Axis Contour and Drill From Solid Model (.STP) 2
Mastercam X5 || 3D modeling #71 || Random object10:01Mastercam X5 || 3D modeling #71 || Random object
Mastercam X5 || 3D modeling #71 || Random object
Переглядів 8099 місяців тому
Mastercam X5 || 3D modeling #71 || Random object
MasterCam X5 || How to calculate 2D area using mastercam x53:17MasterCam X5 || How to calculate 2D area using mastercam x5
MasterCam X5 || How to calculate 2D area using mastercam x5
Переглядів 25110 місяців тому
MasterCam X5 || How to calculate 2D area using mastercam x5
MasterCam X5 || 3 axis Milling exercise || impeller16:46MasterCam X5 || 3 axis Milling exercise || impeller
MasterCam X5 || 3 axis Milling exercise || impeller
Переглядів 3,7 тис.10 місяців тому
MasterCam X5 || 3 axis Milling exercise || impeller
Mastercam X5 || 3D modeling #70 || Impeller (redraw with more improvement)9:11Mastercam X5 || 3D modeling #70 || Impeller (redraw with more improvement)
Mastercam X5 || 3D modeling #70 || Impeller (redraw with more improvement)
Переглядів 1,8 тис.10 місяців тому
Mastercam X5 || 3D modeling #70 || Impeller (redraw with more improvement)
MasterCam X5 || Lathe C-Axis Contour From Solid Model (.STP)8:19MasterCam X5 || Lathe C-Axis Contour From Solid Model (.STP)
MasterCam X5 || Lathe C-Axis Contour From Solid Model (.STP)
Переглядів 1,2 тис.10 місяців тому
MasterCam X5 || Lathe C-Axis Contour From Solid Model (.STP)
MasterCam X5 || C-Axis Lathe Example || C-Axis Contour6:10MasterCam X5 || C-Axis Lathe Example || C-Axis Contour
MasterCam X5 || C-Axis Lathe Example || C-Axis Contour
Переглядів 1,6 тис.10 місяців тому
MasterCam X5 || C-Axis Lathe Example || C-Axis Contour
MasterCam X5 || 4-Axis Mill Example || Project Curves7:02MasterCam X5 || 4-Axis Mill Example || Project Curves
MasterCam X5 || 4-Axis Mill Example || Project Curves
Переглядів 1,1 тис.10 місяців тому
MasterCam X5 || 4-Axis Mill Example || Project Curves
MasterCam X5 || C-Axis Lathe Example || Face Contour & Face Drill10:47MasterCam X5 || C-Axis Lathe Example || Face Contour & Face Drill
MasterCam X5 || C-Axis Lathe Example || Face Contour & Face Drill
Переглядів 94610 місяців тому
MasterCam X5 || C-Axis Lathe Example || Face Contour & Face Drill
MasterCam X5 || 4-Axis Mill Example || Rotary Mill7:04MasterCam X5 || 4-Axis Mill Example || Rotary Mill
MasterCam X5 || 4-Axis Mill Example || Rotary Mill
Переглядів 4,1 тис.10 місяців тому
MasterCam X5 || 4-Axis Mill Example || Rotary Mill
MasterCam X5 || Basic Milling exercise || mold cavity14:05MasterCam X5 || Basic Milling exercise || mold cavity
MasterCam X5 || Basic Milling exercise || mold cavity
Переглядів 2,4 тис.11 місяців тому
MasterCam X5 || Basic Milling exercise || mold cavity

КОМЕНТАРІ

  • @sonluutruong2516
    @sonluutruong2516 День тому

    THANKS YOU VERY MUCH

  • @Gamedroid-fp7tt
    @Gamedroid-fp7tt 4 дні тому

    Pak, kenapa gerakan G01 nya lebih cepat daripada G00?

    • @doni_mcx5
      @doni_mcx5 4 дні тому

      Kenapa ya? Mungkin gara² ini mah cuma aplikasi simulator.. bukan mesin beneran.. 🤔😅

    • @doni_mcx5
      @doni_mcx5 4 дні тому

      Ternyata salah input feedrate bang.. wkwkwkw.. Saya masukin F10, bukannya F1.0 Wkwkwkwk

  • @user-iz3uj3ib2h
    @user-iz3uj3ib2h 4 дні тому

    Почему ретракты медленнее, чем сама скорость обработки?

    • @doni_mcx5
      @doni_mcx5 4 дні тому

      I don't know... I think because it is just a simulation app

    • @user-iz3uj3ib2h
      @user-iz3uj3ib2h 4 дні тому

      ​@@doni_mcx5скорее всего это из-за того, что вы поставили подачу в G1 без точки. Должно быть так, для примера: G1 Z__ F0.1;. Это активирует подачу на оборот (mm/rev). У вас в программе прописана подача в (m/min). Возможно проблема из-за этого

    • @doni_mcx5
      @doni_mcx5 4 дні тому

      Aahh.. you're right... I was wrong to put the feed. It should be F1.0 (one point zero) or just F1 instead F10 (ten) .. thanks for correction.. :)

  • @vivekvishwakarma6843
    @vivekvishwakarma6843 10 днів тому

    Which toolpath

    • @doni_mcx5
      @doni_mcx5 10 днів тому

      Pocket and contour

  • @subertin1382
    @subertin1382 13 днів тому

    thank you

  • @veereshb9771
    @veereshb9771 16 днів тому

    How to hide curves in solid model 4:41

    • @doni_mcx5
      @doni_mcx5 16 днів тому

      Click object that you don't want to hide (solid body), and then press alt + f4... Or Press alt + f4 first, and then click the object that you want to show, and enter...

  • @cnchunter1747
    @cnchunter1747 22 дні тому

    👍🏼👍🏼👍🏼👍🏼👍🏼

  • @user-dy2vm1ro8j
    @user-dy2vm1ro8j 22 дні тому

    Why used old version leatest mastercam using pls

    • @doni_mcx5
      @doni_mcx5 18 днів тому

      because i don't have a powerful computer to run latest mastercam.. :(

  • @Kobar1927
    @Kobar1927 23 дні тому

    Ada no. Wa/grup pak ingin bertanya saya?

    • @doni_mcx5
      @doni_mcx5 3 дні тому

      Boleh tanya di komen aja.. hhehe

    • @Kobar1927
      @Kobar1927 День тому

      @@doni_mcx5 kalo turunnya pahat bisa diatur ndak tempat turunnya

    • @doni_mcx5
      @doni_mcx5 20 годин тому

      Bisa.. bisa diatur tempatnya pas chaining / penentuan titik pengeboran.. bisa diatur juga kedalamannya

  • @ffmclip1040
    @ffmclip1040 Місяць тому

    One video full details thanks 👍👍

  • @ffmclip1040
    @ffmclip1040 Місяць тому

    Hey sir this video series don't stop please continue 3D milling

  • @jahashaik5163
    @jahashaik5163 Місяць тому

    I will join your channel but I want mastercam 2022 videos sir

    • @doni_mcx5
      @doni_mcx5 Місяць тому

      Hehe.. My computer has not been upgraded yet.. :(

  • @skylinezzz1
    @skylinezzz1 Місяць тому

    ua-cam.com/video/i6vyGmfYfaQ/v-deo.htmlsi=kC4EorJkH0m139eO

  • @kendinebubble
    @kendinebubble Місяць тому

    Good

  • @brunobibi8398
    @brunobibi8398 Місяць тому

    You need to talk if you want more thumbs up.

  • @ffmclip1040
    @ffmclip1040 Місяць тому

    Nice modelling thank you

    • @doni_mcx5
      @doni_mcx5 Місяць тому

      Hehe.. you're welcome :)

  • @user-mr3dq8gd1z
    @user-mr3dq8gd1z Місяць тому

    JAKA ALLAHO WE NEED LATHE SIMULATION

    • @doni_mcx5
      @doni_mcx5 Місяць тому

      Nah,,, sorry, i don't have lathe machine simulator files..

  • @rendrapriyolaksono5244
    @rendrapriyolaksono5244 Місяць тому

    Tutorial yang sangat membantu 👍

    • @doni_mcx5
      @doni_mcx5 Місяць тому

      Semoga bermanfaat 👍

  • @THESUNILPRAJAPATI
    @THESUNILPRAJAPATI Місяць тому

    Nice work your sir

  • @rendrapriyolaksono5244
    @rendrapriyolaksono5244 Місяць тому

    Cara menampikan mesin cnc nya gimana pak ? Biar bisa simulasi seperti itu 🙏

    • @doni_mcx5
      @doni_mcx5 Місяць тому

      Bisa cek disini.. hehe.. ua-cam.com/video/0d0C2vuht4s/v-deo.html

  • @rendrapriyolaksono5244
    @rendrapriyolaksono5244 Місяць тому

    how to display a CNC machine like in the video?

  • @dwisuryadharma6173
    @dwisuryadharma6173 2 місяці тому

    Cara menampilkan machine simulation gmn mas??

    • @doni_mcx5
      @doni_mcx5 Місяць тому

      Bisa cek disini bang.. ua-cam.com/video/0d0C2vuht4s/v-deo.html :)

    • @dwisuryadharma6173
      @dwisuryadharma6173 Місяць тому

      Wess... Keren mas😎 Terima kasih ilmunya. Lanjutkan utk simulasi master cam versi² berikutnya. Semangat dan terus berkarya👍🏽👍🏽

  • @karansaha8323
    @karansaha8323 2 місяці тому

    How to download master cam software

    • @doni_mcx5
      @doni_mcx5 2 місяці тому

      I'm not sure, but, i have link to download mastercam x5... Hope that link is still work.. message me via whatsapp..

  • @aguspriyo5602
    @aguspriyo5602 2 місяці тому

    Masss Bisakah pesen di buatkan desaint

    • @doni_mcx5
      @doni_mcx5 2 місяці тому

      Duh, sekarang udah ngga uy.. tim nya udah bubar.. 😅😅

    • @doni_mcx5
      @doni_mcx5 2 місяці тому

      Mau bikin apaan emang?

    • @aguspriyo5602
      @aguspriyo5602 2 місяці тому

      Mau bikin desain untuk input ke cnc milling

  • @olansuhara4683
    @olansuhara4683 3 місяці тому

    Cara gambar nya bagaimana om?

    • @doni_mcx5
      @doni_mcx5 3 місяці тому

      Coba cek disini --> ua-cam.com/video/AJCDwWHtvmw/v-deo.html

    • @olansuhara4683
      @olansuhara4683 3 місяці тому

      @@doni_mcx5 kirain ga bakal beda jauh sama 3axis,ternyata sesulit itu.

    • @olansuhara4683
      @olansuhara4683 3 місяці тому

      ​@@doni_mcx5oh iya om,itu sebelum masuk ke toolpath yang mill(4axis) itu bikin dulu toolpath bubut bertingkat itu nya pakai mesin lathe atau mill?

    • @doni_mcx5
      @doni_mcx5 3 місяці тому

      Bisa pake lathe, bisa pake mill 4axis..

  • @deepakg2762
    @deepakg2762 3 місяці тому

    Daily one

  • @deepakg2762
    @deepakg2762 3 місяці тому

    Nice 👍

  • @CristinaAbdulgani
    @CristinaAbdulgani 3 місяці тому

    Ah Aya Aya wae😂

  • @mixlearningtv4800
    @mixlearningtv4800 3 місяці тому

    Great work, thank you sir. Sir please make a 4th axis programme on spiral bevel pinion, Rough and finishing.

  • @rmnstutus3227
    @rmnstutus3227 3 місяці тому

    Osammmmmmmmmmmmm osammmmmmmmmmmmm osammmmmmmmmmmmm osammmmmmmmmmmmm

  • @Cmtb125
    @Cmtb125 4 місяці тому

    Good lesson sir

  • @vankdothmurali7545
    @vankdothmurali7545 4 місяці тому

    Video recording kaise karre hooi

    • @doni_mcx5
      @doni_mcx5 4 місяці тому

      Camtasia studio

  • @sonluutruong2516
    @sonluutruong2516 4 місяці тому

    😘😘😘❤❤❤💓💓💓💖💖💖

  • @vankdothmurali7545
    @vankdothmurali7545 4 місяці тому

    Sir maine slot banake round part pe 4th axis mee milling karretho chain selecting mee problem hora chain not in construction plane karko bathara

  • @vankdothmurali7545
    @vankdothmurali7545 4 місяці тому

    Sir is modal ko draww Kiya topview Mee usko right side view me Maine translate Kiya chain section Kiya tho boundary not in construction plane and pura solid me error ara sir kya karna plz bathado sir

  • @dailyvloger9570
    @dailyvloger9570 4 місяці тому

    Woah mantap, baru tau x5 bisa 4 axis

    • @doni_mcx5
      @doni_mcx5 4 місяці тому

      5 axis juga bisa.. 😅

    • @dailyvloger9570
      @dailyvloger9570 4 місяці тому

      Mantap pak, terimakasih tutorialnya hehe

    • @doni_mcx5
      @doni_mcx5 4 місяці тому

      Ok ok.. makasih supportnya.. 😁😁

  • @vankdothmurali7545
    @vankdothmurali7545 4 місяці тому

    Sir make video on this modal lot members should waiting for this modal sir

    • @doni_mcx5
      @doni_mcx5 4 місяці тому

      🤔 okay.. i will make a video how to draw this 3d model, later,,,

  • @vankdothmurali7545
    @vankdothmurali7545 4 місяці тому

    If get boundary not in construction plane at that time what I shall do for selecting method

  • @vankdothmurali7545
    @vankdothmurali7545 4 місяці тому

    Sir profile peee cut Body kaise banana sir plz step thoda coment Karo sor

  • @vankdothmurali7545
    @vankdothmurali7545 4 місяці тому

    Sir modale draw khara tho upper me project kharke thumara modale hai jaina cut Body kare tho problm a ra sir operation rewuirs planar chain set karko

    • @doni_mcx5
      @doni_mcx5 4 місяці тому

      You can't use extrude cut for creating that profile. Instead you can use revolve feature to make that profile done

    • @vankdothmurali7545
      @vankdothmurali7545 4 місяці тому

      @@doni_mcx5 chain selecting time boundary not construction plane showing sir what can do at that tien

  • @vankdothmurali7545
    @vankdothmurali7545 4 місяці тому

    Sir ur great person sir thank u for doing videos sir thank u very much

  • @nq7007
    @nq7007 5 місяців тому

    Nice

  • @joshuaramadhan293
    @joshuaramadhan293 5 місяців тому

    saya ngikutin pake mastercam 2023 learning edition tapi ko ga muter ya malah toolnya yang muter

    • @doni_mcx5
      @doni_mcx5 5 місяців тому

      Mungkin itu simulation yg verify.. coba simulation yang backplot...

  • @sbh580
    @sbh580 5 місяців тому

    Sir god vedios update and how to draw god modeling and program 🙏 mastercam x5

    • @doni_mcx5
      @doni_mcx5 Місяць тому

      thanks.. for 3d drawing and toolpath generating, please check my other videos and playlist...

  • @vankdothmurali7545
    @vankdothmurali7545 5 місяців тому

    Sir multiaxis pe jada videos Karo sir

  • @bogbag9418
    @bogbag9418 5 місяців тому

    Great bro thanks 🇲🇦

    • @doni_mcx5
      @doni_mcx5 5 місяців тому

      Thanks for watching.. 👍

  • @jahashaik5163
    @jahashaik5163 5 місяців тому

    Thanks

    • @doni_mcx5
      @doni_mcx5 5 місяців тому

      Whoa.. thank you very much.. 😮🔥

  • @naraplay1812
    @naraplay1812 5 місяців тому

    cara undo atau hapus fillet nya gimana pak kalo salah?

    • @doni_mcx5
      @doni_mcx5 5 місяців тому

      Hapus lewat operation manager,,,