- 8
- 48 822
Mr Vanos
Приєднався 4 бер 2022
Bmw Vanos & Engine Rebuild Specialists
How fast can a 1000HP M5 go?
A few weeks ago we put our 1000 HP daily driver package through its paces at Elvington Airfield.
Timed on track over a measured mile and 1.2 miles.
MV1400 Rods with stock pistons
MV head stud kit
Evolve Tuning
MV 1000 turbos
Pure drivetrain transmission
Eventuri intakes and inlets
CSF charge coolers
Akrapovic Exhaust
99 Ron fuel and WMI
Timed on track over a measured mile and 1.2 miles.
MV1400 Rods with stock pistons
MV head stud kit
Evolve Tuning
MV 1000 turbos
Pure drivetrain transmission
Eventuri intakes and inlets
CSF charge coolers
Akrapovic Exhaust
99 Ron fuel and WMI
Переглядів: 2 394
Відео
1000 HP G82 M4 Engine Install Timelapse
Переглядів 82511 місяців тому
Watch how we reinstall a S58 engine after it’s had our engine upgrade package carried out. The engine had our @Mr_Vanos_UK MV1500 rods installed and head stud kit. The aim of this build was to hit 1000HP and be the first fully built M4 in Europe. We also fitted a full suite of CSF parts. CSF charge cooler intake, CSF charge cooler radiator and trans cooler. The Evolve M4 has been running since ...
1000HP F90 M5 S63 Timelapse Engine Build
Переглядів 10 тис.Рік тому
The full process of what goes into stripping and rebuilding a S63 T4 engine from the F90 M5 and F9x M8 We installed our MV1400 S63 Rods, MVHeadstud kit and upgraded high load rod bearings. Attention to detail and cleanliness are key in this process. This engine will be pushed with big turbos to around 1100hp. All parts in this build are available to buy either from us or Evolve Automotive insta...
S54 E46 M3 Vanos Unit Rebuild
Переглядів 1,1 тис.Рік тому
A short video showing the assembly process of the Vanos unit from a S54 BMW engine. The unit has already been stripped and cleaned.
Brand new 1200hp F90 M5 engine build
Переглядів 4,1 тис.Рік тому
Full strip down of a brand new 2023 F9x BMW M5 engine in preparation for upgraded parts. This engine will be fitted with our MR1400 Rod kit, MV Head Stud kit and our 1200HP rated turbos.
1000hp BMW F90 M5 Turbo Install
Переглядів 29 тис.Рік тому
Start to finish installation of a pair of MRV1000 turbos on a F90 M5. After having a full engine build last year with our forged rod engine package the customer decided he wanted to go a step further. With this option the performance is significantly increased but also it’s much safer for the engine in the long term. Tuned by @EvolveAutomotive build by @Mr_Vanos_UK
E36 M3 Evo Vanos Installed @Mr_Vanos_UK
Переглядів 504Рік тому
E36 M3 Evo Vanos Installed @Mr_Vanos_UK
where are u based brother can u help fix my bmw tenks
1200hp my goodness, how much psi of boost are you running on this engine?? I have a n63tu with slightly bigger turbos and 22 psi of boost and sometimes I feel like the drivetrain is at it s limits. Cant imagine what this kind of power must feel like :)
quick question , can i run this full entire build without going full 1000hp . i think 700 on the crank is enaf, just want to make the car future proof
What internals did you upgrade in terms of the engine and the transmission
What was the lag and power delivery like compared to oem turbos?
How much hp are the stock rods good for?
👍👍
Fantastic! if only my local guys worked this fast
Any new videos coming ?
I have chance use MR.VANOS for my z3m s50b32 vanos change.Normalny i leave mechanic when is doing something with my cars but when i see how this Guy is working with my car i couldnt go away that was WORK OF ART. This Guy is on another level of car specialist. 100% recomended !!!!
Gents, what brand timing tool did you use for this?
How much would this cost on a stock m5 comp 2021?
1000 with the plastic manifold?
Love your work, for the f10, is the way togo, your arrow rods f90 pistons and the same rod bearings?
Engine is not older as 5 months, and already more hp than factory!Is it special order ?it didnt even went through bmw engine test!
Did you tune your car after that turbo upgrade
Amazingly fast! And this is on a non-prepped airport runway. On a prepped drag strip with a good launch, you’ll be even faster. The 9.68 in the 1/4 mile at 145 mph is very impressive. And to see the speed keep climbing rapidly all the way to the 1 mile marker at over 205 mph is quite an accomplishment too!
Still not as fast as the civic with the giant exhaust that goes by my house at 3am
😂😂😂😂😂😂😂😂😂😂😂😂😂
Looking to buy your products to be delivered to US. Where can you buy the engine internals.. who tune the car? If you did, can you tune remotely? Hope to hear from you. Best regards..
Whats the actual motorcode off these engines?
The only thing I can say, is, you should change your name to Mr. Thanos! 😅 🖐️💎♦️🔸🔹💎
how did you get the 2 turbo return line bolts out X(
Really long T30 and you can get to them
Forged rods and pistons already installed? I hope.
Yes we have our own forged rods and stock pistons
Hello steve, is it possible ro send an email to you and ask you few things since your the doctor ? I have a very weird issue with my vanos on the e46 m3 s54 cs and need help
Can you provide some backstory? It looks like an almost new engine is being torn down so the stock rods can be replaced with Arrow rods.
It was a brand new crate engine from BMW that was stripped for rods and head studs.
@@Mr_Vanos_UKOkay, that explains it!
@@Mr_Vanos_UKhow much does a brand new crate engine even cost
How is this much safer long term for the engine?
We have covered over 20 k miles and over 1500 1:4 mile launches. Also we run more power than this usually.
I’m looking to do that to a 2022 M8 competition. Can I do that to my motor? Is there a place in the USA that can do that?
@mpowerhouse in New York
what is the maximum I can get on LCI M5 2021WITHOUT METHANOL INJECTION, WILL IT BE RELIABLE CONGRATULATIONS ON THE GREAT CAR THAT AUTOTOPNL TESTED
No u can sleeve engine and get more
what is the maximum I can get on LCI M5 2021WITHOUT METHANOL INJECTION, WILL IT BE RELIABLE CONGRATULATIONS ON THE GREAT CAR THAT AUTOTOPNL TESTED
Is this the one that putted into Pre LCI M5 CS?
No this is one that’s gone into a customer car
More videos please 👍
Hello Mr. VANOS. What was the torque on the helical spindle set to (5:25)? And also for the VANOS Solenoids (7:15)?
Hello Spindle is 9nm and the solenoid is 10nm
@@Mr_Vanos_UK Thank you!
nice to not have to remove the cams to remove the cylinder heads
On a new build or late F90 we don’t, if early S63 we will remove them to do the valve stem seals
Isn't the stock M5 engine already comes with forged crank, rods and pistons? I believe the M550i only has forged crank and rods but cast hypereutectic pistons?
Evolve installed forged internals on their 1000 hp build.
They do but the rods aren’t strong enough. The pistons are cast but very very strong. We use stock pistons on our MV1400 rods
@Mr_Vanos_UK I would not use ANY cast pistons in a performance build up. There's NO cast pistons that would be stronger than a good forged ones. Funny that you're saying stock forged rods are not strong enough but then you would use cast pistons on a 1000hp build up.
@@zzzzVIDEOSzzzz they are working for us so far without issue and have done for 3 years. Multiple big power builds. Mahle motorsport m142 pistons are as good as they come. Our car is top 3 fastest in the world for F90. Good tuning is the key.
@Mr_Vanos_UK Oh...you didn't mentioned Mahle M142 pistons originally. Those are not cast. They're latest and greatest forging with higher silicon content than the regular 2618 or 4032 to reduce the issue with high expansion rate of regular forged pistons. Plus they have high tech Phosphate and Grafal dry lubricant coatings and anodized top ring grove to protect against micro welding of the top ring plus generous ring land material for high boost application. Typically not the properties of cast pistons even hypereutectic ones. Far from it. Awesome! Carry on. 👍👍👍
Nice work.
Aside from making sure the parts are clean, what all did you do with the teardown and rebuild?
It had our MV rods installed, MV head stud kit and upgraded rod bearings
Can't tell you how much I wish I could win the Euromillions and get my own big power M5 Comp built.. Good job guys!
autotopnl bought a lot of us here 😂 you have an utterly insane car sir
Great build. Saw AutoTopNL review - daily driver package is the right name for it )))) where can one see a list of mods for this build? is this package applicable to other BMWs with this engine? how about X7 M60I?
this is the dreammmm!
Sick car
Nice Motor, over from AutoTopNL. LFGOOOOO
Brilliant, well done Mr V 😉
How much whp?
Depends on tuning level, anything from 850 to 1050 with the right supporting mods and fuelling.
@@Mr_Vanos_UK and this in stock transmission ??
Does this require an upgrade to the exhuast cams to push higher power?
No thats only needed for running E85
Are you using the stock rods..
No, this engine has our rod package fitted.
@Mr_Vanos_UK how much does it cost to do this?
any videos of this running?
£12.5K plus vat for the engine build.
Proper job!