Відео

@@francischiong1831 I started filming the install but doing most of it myself I had to stop it was a task had to measure then remeasure before drilling

Not sure sounds like a good question for the tundra forums. I do know if you take it wrong or don’t fit you will encounter body damage

Here is a 4Runner at the squeeze ua-cam.com/video/Wd_iQytr4y4/v-deo.htmlsi=iQcK2NUpSnZnkkXo

No, I ordered the parts raw finish with the bushings on the side so I could send out to powdercoat

I haven’t seen the 2024 models yet. My guess is the rear cargo space hasn’t changed much. You Should ask the guys at AAL they are super helpful

ua-cam.com/video/KbPG-nd6B84/v-deo.htmlsi=PtTOnf8hon8l6qWv here is one

Thanks the family is loving it. No more cooler full of wet food at the end of trips

Local to you Have a a 4xe and want the Rusty’s kit how do you like it

@@delagto_5340 The kit has been solid drives real good. My friend went MetalCloak I'm glad I went Rusty's and spent a little extra time having it all powder coated.

@@EnricoPavia you get more for your money with more arms and for the money. What kit / lift size do you have

@@delagto_5340 I went with the 3.75" Advanced kit and added the Aluminum Steering. I posted a couple videos showing the parts before and after powder coating and being installed.

@@EnricoPavia okay cool I’ll need to go over your vids more they only offer 3.5” for the 4xe and wanted to stay closer to 3 because I want to do 37s

Yeah I have to take the fridge out always need the space for work etc.

Yes I am using the cfx3 35 Dometic fridge. I did look at the 6x3 flat slide but it was really close on space so I played it safe and went with the slightly longer slide.

The slide would not have a flush mounting contact with your jeep floor. I'm sure you can rig a bunch of spacers etc... but this ended up being a solid solution for me.

Hey sorry I don't know if roll bar pads/covers would block the mounting points.

I found the nets on Amazon. www.amazon.com/stores/page/7AD18DAE-A20B-4894-AB4D-AA5A7A1264D2?ingress=2&visitId=389f9225-5caf-48d2-bd95-256bf705b099&ref_=ast_bln

it is the 35. My friend picked up the 45 it fits as well only thing is you have to raise the shelf a couple inches.

no adapters for the fridge. I did fabricate my own mount for the American Adventure Lab flat slide to bolt on to so I could access the storage space underneath. The fridge sits on it and is held on with tie downs.

@@EnricoPavia would love to see how you attached your slide to the mount and the mount to jeep specifically before i start my long awaited build. looks great sir

@@needsofnavy5586 ua-cam.com/video/soORaxd7aN4/v-deo.html this video shows you more sorry I didn't do this as a tutorial because I'm really only building my families weekend getaway toy. I used the factory rail holes on the left and drilled three new holes for rivet nuts for the mounts right side. The factory plastic tub was a little uneven in one area so I sanded it down with an orbital sander only took a couple minutes to level it out. I also used rivet nuts on the mount it self to then fasten the fridge slide to the mounting plate. enrico@enricopavia.com if you need more info or @enricopavia on IG

I apologize for the irritating music. My kids liked the track and I do this with them to get them into wrenching on cars, filming and editing. The instructions that come with the Banks products are really good and easy to follow. The unit plugs into the OBD port and then plugs into the pedal. Here is the banks video I hope this helps. official.bankspower.com/owners_manual/97696-banks-pedalmonster/

@@EnricoPavia Thx..i didnt mean to sound crass, but im not too good at reading directions. Im a visual learner and have to go step by step by watching a video. I ordered one and will attempt to install when it arrives. How do you like yours so far?

@@akbrakes9412 I love it. I took it out once and my wife noticed right away and told me the jeep wasn't as spirited to drive. It really wakes the pedal up over stock. I'm running on street mode +3 and it gives the jeep a great boost in response.

@@EnricoPavia Does it help u reach top speed easier? Im also thinking about getting a derringer down the road..its supposed to increase HP

RUSTY'S ALUMINUM HD STEERING SYSTEM - JL WRANGLER / JT GLADIATOR ua-cam.com/video/QT1qTA6WHiw/v-deo.html

The cover I got from Dometic happens to slightly catch my rear window allowing it to stay propped open you can see the flap slip under when I open it.

Thanks I'm loving the roof rack have some pelican's mounted to it now and it has opened up a ton of storage space inside my jeep for our family trips etc...

I picked up the CFX3 35

I have been really happy with it. Parts are built solid and the suspension works great.

Take a look at Banks Derringer. This exhaust deletes the bulky muffler shedding some unwanted weight. That is a plus for performance in my book. A couple manufacturers have released high clearance versions which is another plus. I really didn’t see a sound change the excessive DEF systems found in our Jeep kills that from happening.

Thanks we are trying to have some fun with the Jeep and capture some of the build as it is coming along. Sometimes it is difficult to do so because I am doing most of it on my own including the filming :) but it is fun and the outcome has paid off.

thanks, You guys are making some great products love all the attention to detail. I have gotten all my friends hooked on your gear.

SKU # 64330 call banks they are very helpful on selecting the correct product for your application bankspower.com/products/throttle-controller-64331-pedalmonster-throttle-sensitivity-booster-for-use-existing-idash-or-derringer-for-many-cadillac-chevy-gmc-chrysler-dodge-jeep-nissan-check-fitment?variant=40940402049221

Thanks Sabrina we miss you and need to plan another Costa Rica Trip.

Thanks I am trying to do more and get some voiceover talking points going on future edits but it has always been difficult as I'm really just doing it for fun while really wanting to just keep the builds and installs simple and completed.

Love you content. What music is that you added to it?

The steering components where in stock when I ordered those and came right away. My winch mount and tire carrier also from Rusty's took a couple weeks and the lift took a couple months but they let me know about the lead time when I asked while ordering so it was expected. Well worth the wait the parts are really built well.

I bought them on Amazon This is the one I am using on top of the Cargo shelf Powertye Mfg 15in x 30in Large Cargo Net www.amazon.com/dp/B08JHB3BSH/ref=cm_sw_em_r_mt_dp_3TV8ANHA380PPQ7NAX2C?_encoding=UTF8&psc=1 This is the one I am using under the Cargo shelf for my chairs and smaller items PowerTye 50151 Red 15"X15" Cargo Net www.amazon.com/dp/B0022ZXOE0/ref=cm_sw_em_r_mt_dp_VC1A8WXSZXC6VWSEST61?_encoding=UTF8&psc=1

The cargo rack is rock solid. No rattles, easily adjustable height and a super clean finish. American made product as well so we know our money is helping support another family like ours.

The Rusty's Off-Road Mounting plate that I used to install the Warn Winch keeps the bumper tight against the frame. Some of the other mounts push the bumper out an inch or more.

I was skeptical about buying the pedal monster and thought the same thing. The difference is Banks really put some R&D behind it and developed one kick ass little component that both me and my wife can't live with out on our JL Diesel. We don't have it cranked up and hardly ever make any adjustments it is mostly set to Street +3 and it changes the characteristics of the jeep making the throttle more responsive giving us a spirited Diesel.

none no complaints at all with all the DEF stuff still in play sound is like stock. no real increase in sound. I would say it sheds some weight and adds to the appearance with the Gibson Titanium Skull tip they added.

Red Weapon CF with the Helium 8k sensor.

I’ll take the diesel any day over the v6 or i4 options

Posted a couple quick videos of the lift thanks for watching it is coming together nicely

Enjoy it we are have great times with ours

Jeep is coming together nicely we are going to Pismo this weekend for a fun little run in the dunes

video just dropped showing the parts back from Powder Coat ua-cam.com/video/ZeCeqm3rS_g/v-deo.html

The Derringer is on my list. My money is tied up on my lift right now so I have to wait a bit.