Відео

The white wheels shouldn't spin freely. They should be tight. If a wheel is wasted a little then, I force-spin it a little. Regarding the noise issue, I recommend checking all the wheels to ensure they move freely and aren't causing any friction. Be sure to test the unit again before final reassembly. I know this process can be a hassle. Good luck with the repair!

You're welcome. Happy to hear!!!

Are you doing this on this same controller? Sx2? It's possible you may have a hardware problem if it's not working.

Now that you mentioned, I believe it to be true. The other day I felt it wasn't as loud/bass as it used to be. I will keep on eye on future updates with hopes this is fixed :(

Personally I never used this before nor have a need for it. I made this video for another DJ which was experiencing these low levels and hoping there is a solution to this. So far I'm told RCA over BT is better. Apparently there's lots of people out there that prefers to play right off their phones, or table for different reasons. At the end of the day, this input should work for anything you would like to plug to it, but I think the conversion from USB C to RCA is the problem.

So true. In this case and external mixer will address this problem.

Are you suggesting this ? www.amazon.com/dp/B09Y1TKBBZ?_encoding=UTF8&psc=1&ref_=cm_sw_r_cp_ud_dp_AS93BREMBTBP6FN10RDY&skipTwisterOG=1&newOGT=1

@djab203 i have a similar one but yes .

@@DjPlutoMarz Good to hear. I will suggest this to others with the same problem. Thank you.

I haven't done the flx yet but it should be similar to the 1000srt - ua-cam.com/video/rYi1LwDxMM4/v-deo.htmlsi=yb1vPDVnhZBuNo0S

Hey. The 710 are indeed powerful speakers designed to handle high volumes. Here's what I recommend: * Set the speaker volume to 100%. * Start the controller volume at 25%. * Gradually increase the controller volume until you reach your desired sound level. Please note that excessive volume on the controller may cause distortion on the speaker so you will hear it. Additionally, the 710 model has a built-in Protect Mode that may activate if the volume exceeds its limits. However, I believe you should be able to reach a satisfactory volume without encountering any issues.

@ thanks a lot for the respond, my problem is that I don’t want to broke them and I don’t wanna make them sound more powerful then they sound, my DJ controller is this one: DJ numark party mix mk2, and can you recommend a good aux cable and I told you what console I have because the main output for yours is rca my one is a cheap one and it’s only has a headphone cable to listen to what you’re doing and a aux cable for the output, should I change the console ?

@@dragosmario You can get this cable to go from controller to 1st speaker then from 1st speaker to 2nd speaker - www.amazon.com/dp/B091QD9QTY?ref_=cm_sw_r_cp_ud_dp_QVWSQRXRPFF5DVX6TYR7&skipTwisterOG=1&newOGT=1 Also a better controller would be easier

@ ok, and what controller would you recommend?

@@dragosmario There are so many choices, but I would recommend DDJ SR2 as a good startup controller. If you want to go newer and better, DDJ FLX10 is my preferred choice.

Thanks for this information. I believe all controllers using this cable will perform this way. I wonder if there are any solutions for this so it sounds louder.

Will do on my next repair.

lol ... The spot (Ansonia) :) I think a bunch of DJ's spilled Henny on it :)

You're welcome. Glad to help!

You're welcome. You brought up a good point. Let's see if we get a solution.

@djab203 yes that is good option to play music if someone request songs

Between door and ceiling I have about 6" now and between the motor mount and door 2"-3"

Could be the woofer. Test woofer

sorry to hear. Take it apart just to see if there is any liquid damage.

This was so hard :( Took 2-3 to figure it out :)

Hi. Yes. Use AUX or Daisy Chain In. Nothing else. Mic/Guitar input is not designed for line and will likely result in very low or distorted audio. Cable quality definitely helps with better quality. I usually recommend buying one with lots of reviews on Amazon.

@djab203 ok! Thanks a lot! Will try with my best cables and look for the best setting!

You're welcome

Depending on the part, try looking at pacparts for all listed parts and see if you are able to locate it. Hopefully you are able to replace it - www.pacparts.com/model.cfm?mfg=Pioneer%20DJ&model_id=DJMS9&action=list_part&mode=auto&back=0

Pioneer DDJ SR2

@@djab203 thanks

When they are close to each other the 310 overpowers the Encore. If they are further apart it's better and would work good in an event with multiple rooms. Both are great and depending on where you plan on using them they will perform great. I don't have any criticism and I use them quite often.

Hi. Sorry there can be many reasons. I would start with checking all the cables, check for errors, check motors. Take covers off and turn it on so you can see if any belts are broken.

It's a common issue. Try resetting it by holding the power button down for 10 seconds. Otherwise, you may have liquid damage. Check my other repair videos on this unit.

Hi. Very nice work!!! Thank you.

These are the part numbers. You can search google for the best prices. Pacparts.com is usually one of the sellers. Pioneer DJ DWX3553 PAD Left Pioneer DJ DWX3583 PAD Right

@djab203 i still cant find it can you assist me in locating them

Which pad you need? Left or right? Or both?

@@djab203 both

@@djab203 both

Did anything spill on it? Sounds like you have liquid damage.

Sorry I only use youtube for help when I'm free. I can try to guide you, but make sure phone is not carrier locked before doing anything. This website has the CSC code for colombia which appears to be COB. You should be able to follow my video instructions using your location info. samfrew.com/download/Galaxy__S24__/2b0n/COB/S921BXXS5AXKA/S921BOWO5AXKA

You are very kind in replying to my comment and I thank you very much. Then you could get me out of a doubt. And what if I install the SM-S928U1 firmware since my device is SM-S928U Do you know if there is any risk that my phone will become useless??

@@duvanyepes8500 You're welcome. You should be good to install SM-S928U1 which makes your phone unlocked as if you purchased it directly from samsung. S928U = US carrier version, 1 physical sim and eSIM, botched SIM manager, mmWave. Can crossflash U1 ROM S928U1 = US unlocked and Puerto Rico version, no bloatware's, rest same as U.

@djab203 Perfect thank you very much I will do that.

Brother is me again and I was able to install the firmware so I no longer see SM-S928U Now I see SM-S928U1 also disappeared the logos and applications of Verizon including the start slogan when turning on the device but still rejecting the simcard and asks me for the code spelled by Verizon to be able to use the phone with another simcard. Should I try installing another firmware?

I would suggest inspecting the motor. Make sure there are no lose screws or wiring

Time for celebration :) Great job! Totally agree with that unknown feeling but once completed it's totally worth it. Enjoy!!!

@@djab203 thanks by the way I had a setupconnection error 2 times but I managed to fix it with the wipe/cache and connecting it in the back port xd

@@nchtblut You're welcome and thanks for this info in case others run into this issue!

@@DPLawncare1997 yes. That stop switch is ridiculous.

Glad I could help!

Every country have a different code - find yours here - eu.community.samsung.com/t5/galaxy-a-series/list-of-samsung-galaxy-csc-country-specific-product-code-region/td-p/2497939

@@djab203 I had this doubt because I bought the s24 ultra in the US with Verizon.

If you don't feel comfortable don't do it. If you know someone techy ask them to help you. Mine has been working great since this video and I've received multiple Samsung updates including the 7.0 beta Android 15 which is cool 😎

@@djab203 I think I can do it I'm having problems with my s24 ultra it's overheating and the battery doesn't last long and Verizon has put tons of bloatware on it and I want to get it clean. The last time I flashed a Samsung phone was a s4 back in the distant 2013 xd

Totally agree. It seems you have the international model. Have to do more research on this but I'm sure its doable.

Could be hardware related. Like liquid damage or needs a reset. Try reset and this first.

It depends on what you want to use it for. I enjoy this speaker and use it at many family events, at the beach and parks and small functions. It's good to have

Hi. It's definitely the wiring. You have to track them down starting with the plug. Inspect all plugs and wiring first. Use a multimeter to test wires. Feel free to show me.your video as well.

@ u have any social media that I can send u the video

@ where can I send the video what’s yours social media?

@@KodiBuke I prefer flx10