Відео

So that is something I've been thinking about i just haven't found a good Way to do the locking part some commercial stands have decent locks but need special parts and pieces. Do you have any ideas for the locking part?

I was just going to use cam straps

@@bryanmoring4298 o i got you yeah that would def work and be stronger so the steel is heavier and for the saddle platforms its not that much of a difference but for a larger platform you would really start to tell but if you dont mind the weight its def do able

And you probably wouldn't get any flexing from the steel like you do with aluminum

I noticed on my steel saddle platform I barely get any flexing but I do from commercial aluminum platforms

Lol yeah it was the first platform I attempted and yes it came from the ashes and will soon return lmao if your interested in a good platform build ua-cam.com/video/7YxU0fRWF_Q/v-deo.htmlsi=0nHei3T4oV0WhaEx

You are so very welcome 😁👍

No I don't sell them. I haven't made a 240v they are similar but there is a difference in the way you wire it you also need a 240v controller as well some controllers are 120/240

Thank you very much I built them around 2 years ago and really enjoyed using them they are a little heavier than most sticks but feel way more solid and the foot room👍

If you are interested the video of them being made is on the channel and thanks again for the comment

Copy this : Perma "R" Products R-2.9, 0.75-in x 1.13-ft x 4-ft Unfaced Polystyrene For Use In Garage Doors Board Insulation Item #15350 Model #900050 Then go to Lowe's website and paste it in the search it should bring it up

I get it from Lowes it's insulation foam at my Lowe's it's in the same spot as the insulation

I have been using it for two years now and it's not a problem because all the weigh is pushing down on it kinda like a 2x6 you can easily snap it if you bend it on its side but if you stand it up straight it can hold a lot of weight

You absolutely can just bend them however it will weaken the metal a little and it's easier for me just to weld them great comment 👍

Yeah Ryobi's are tanks I dropped one into 2ft of water pulled it out took the battery out and a half hour later was using it and still do to this day and yes I do plan on making a better fence on it however I don't use it that much so haven't gotten around to doing it thanks for the comment much appreciated

I'm not sure if I still have them but I can check if I do your welcome to it

I'm not sure cause some material like the steel tubing and the flat steel bar I had already from a previous build if I had to put a $ amount on it I would say like $30.00

No not really there wasn't any major cracks however it did seem to crumble and crack a little in the spots that didn't have a thick enough cement layer it was more of a spider web crack/ crumble however some of my real Rock's did the same thing

They actually held up pretty good . I would cover both front and back maybe even cover the foam in chicken wire before adding the mortar.

Also these are good for places that don't get a lot of traffic if you step on them they will break.

I know they're definitely far from the best table saw out there I've owned for over 5 years and never had any issues. Just keep a good blade on it and it will cut angles and all

I absolutely agree descent saw but really bad fence. The fence I made has been working really well but there's a few things I would change maybe a future video lol

I'm not sure what the pump size is it is just one of those small pond pumps I also put a ball valve in so I can fine tune the water flow

Yes you could however if you are running 240 volt or 30amp 120v you would have to get a gfci outlet to match that Amp also you would have to rest the gfci every time you plug in or unplug but that's not that big of a deal

This is a great question I might just have to go back to the drawing board and make one with some kind of backup or fail safe 👍

Concrete coloring is a powder or sometimes liquid that you can add into the Concrete mix to get different colors

I wasn't planning on doing that however I've been getting so many great questions and ideas I just might have to do another one

It was at the time of the video but like the pined comment says chrome is no longer available in Google play store it sucks that they removed it now you have to jump through hoops

@@kodiacademy9825 Sorry did not see the pined comment. I ended up using down loader and took some time to fined a worker able link to get the browser there to work. Not all inks for the down loader work either.

There's another way to do it you install analiti speed tester and use the browser tester to download Aptoide or you can download right from analiti

Why they would remove chrome from the play store makes no sense to me es explorer I get cause there was some wrong doing but chrome I don't get

It's a 120 volt heating element

I'm not sure I never checked to see if it raised the pH so IDK

Thank you so much your comment is very much appreciated 👍

So it will definitely heat up well past 212 degrees you could run 20 gallons it's just that it would take longer to get up to temp for example with a single small element it would take about a hour on full blast to get 15 gallons up to 170 180 if you go with 240 volt and a larger element or even 2 element's it would cut the time down significantly

As you run the temp will continue to rise the whole point of this controller is to be able to control the temp and speed

Okay awesome could you run dual elements on the same 110 configuration? Or would I have to step the element size Down?

i would NOT run 2 elements on 1 box some people have 1 element ran by the box and the other just has a on off switch on it and they plug them in on different circuits when it gets to the desired temp they turn the one element off and control the other element with the box. I would strongly suggest you have a professional or someone who knows electric well make sure that the wiring and circuits are capable of handling the power. I know you said you are new at this so im going to send you 2 channels that are really good for info on this matter

check out these 2 channels they have all the info you will ever need on this matter the one is called still it and the other is barley and hops ua-cam.com/channels/ThY8lOKKkVDd9HVBT59zCgttpshttps.html://ua-cam.com/channels/atCieEI4cPNteKXzBomVMQ.html

Thanks bedanta it's much appreciated 👍

Yes it is. You have to go to analiti speed tester and install it inside of analiti there's a browser speed test if you hit that and change the URL to Aptoide app URL you can download Aptoide and from Aptoide you can download es file explorer and other apps

aptoide.en.aptoide.com/app here is what you need to type in for Aptoide download when it asks you if you want to use Google play or analiti speed test use the speed tester to download it takes a few minutes but it does work if you have any questions feel free to ask them 👍

@@kodiacademy9825 Nice one, thanks for the help 👍

How i can download google chrome

You have to go to Google play store and install downloader and inside the URL box type streamertips.com/download_chrome then you will have chrome on your home screen