Відео

so much love put into every detail!

Option 1 (recommended) : using Flywoo 1003/14,800kv motors, Option 2: using Beta FPV 1102/14,000kv motors,

Best motors we (spydr) have tested so far are amax 1102/9000kv on 720 or 660mah 3s. Flight times of 5-6:30 min freestyle and 6-7 min fast cruising.

Completely agree, being able to swap the camera over as a module would be so awesome.

Your not wrong yano 🤔

@@OnlyDronesFPV the detail is unbelievable for an 03,lookijg forward to finding out

we run 720mah 2s and power the 03 unit directly off of battery terminals (Vbat) and have not had a unit turn off- even going down to 3.3v per cell.

But how with the moonlight?

@@benchmarkheaven4392 same with the moonlight- it actually does better than the 03 on 2S.

@@spydrcinematics1516 damn everybody said it cuts of shortly after start of the flight

@@benchmarkheaven4392 not sure how they wire the unit to power. Our tests and pilots have been fine. If you are unsure, you can use a FC with a voltage regulator,

Gemfan 3 blade 45mm with 1.5mm hole

not noticeable at all, most pilots prefer it's performance, especially lack of any jello and responsiveness.

i came back just to the video just for that! ITTTSY!!!!

36g dry frame. More specs here: www.spydr.us/features

Thank you very much! I'm impressed with this WS cam!

Thanks 👍

Tough decision. I'd say WS has a huge advantage in low light, but DJI can be stripped to a naked AU- saving weight. And we have a 1g cooling fan powered off the FC to keep it cool. We have naked DJI rigs with hundreds of flights for the past 6 months with no reliability issues.

Glad you like it! Let me know if you have any questions.

stabilized but I think It would be slightly similar to the raw footage

The ITSY's dual level vibration dampening allows you to run very low stabilization in Gyroflow. This was with .016. That's so low you cant use the slider and have to manually enter the value. The advantage with the ITSY is you don't have to increase smoothness to reduce vibrations so much less cropping or zooming than most stabilized footage from other designs.

I have seen a lot of poorly setup footage on YT. Knowing how to expose and shoot is key. This was shot by myself and a fantastic pilot in TX. Both with backgrounds in filmmaking.

i was gonna say impressed by night footy some kinda denoise added? looks like really gradedable.....

daylight has no denoise. Night footage has slight denoise in resolve.

Thank you! We're just starting to see ITSY footage from the Moonlight- These were evaluation flights. All kits in the nexxt batch will be fully Moonlight ready ( and also work with DJI 03) but the lack of jello and flight performance is working great.

And thanks for the video and settings!

It's something to consider. There may be a possibly of something wild coming.

Not sure if I saw your question?

@@chriskarcher9561 are you receved my message ?

​@@chriskarcher9561 I don't see it for sure

Thank you! Still my favorite one to fly.

45mm

Try this. 30fps 1/60 shutter iso 800/1600 and lock WB so it looks good. Make sure you’re shooting in the log profile so you can control noise, reduction in resolve or other tools.

@@spydrcinematics1516 Yea you guys did a great job, I've been watching reviews all day and some peoples night shots turned me off but this was sweet.

@@RezaEvol Thank you. Night shots on the 03 can look good, just need to know how to post and color grade.

PavoPico parts can drop right in. Unfortunately module eight uses larger props. The itsy uses 45 mm gemfan 3 bladed props.

@@spydrcinematics1516 but I can use smaller props and test it hahaha Idk its a good idea. No, nothing from beta, my pavo pico fc dies after 2 months. Any other options ?

@@damianwyczakowski2491 if the motors fit you can try😀. We’ve been flying the recommended setup: tune_rc poly405 flight controller / betafpv 1102/14,000kv motors for months with probably 60-100 crashes and our first prototype still flys great. See the shadows video posted in the channel- that flight is after at least 50 crashes- one coming out of a powerloop and hitting the side of a barn at full speed.

@@damianwyczakowski2491 we have over a hundred crashes on the Tune_RC Poly F5405 Flight controller and it still going strong: www.tunerc.com/product/poly-f405-2s-4s-aio/

@@spydrcinematics1516 For real? Just getting the frame?

Thanks damian! Go to www.spydr.us and click on the buy button.

@@spydrcinematics1516 if shipped to portugal/europe, do I have to pay vat ? or can you ship from europe?

Thanks for the note. Actually no sound is there because I prefer to build while listening to music rather than whatever happens to be in the UA-cam video.

@@spydrcinematics1516 I was actually watching this video listening to a music group called Iron Maiden.

The Number Of The Beast!@@88_shadesoffpv

Glad it was helpful!

Thankyou Happy!

Amazing! great flying!

this looks so good, do you have any tutorial how to get the o3 quality and colors like this?

Excited to see what you do with it! Look in the coming days for a build guide on the website as well as a CLI dump and other tips to get the best performance.

Thanks! 👍

When we start shipping this week, I’ll share out a CLI dump and a diff file.

All settings and PID tune is in a link in the build video description.

On this flight, we used a GNB 720 MAH 2s. We get flight times of up to 6 minutes when landing at around 3.4V.