Відео

Please make me a video of how to auto tag each duct (fitting) with its lenght and label number. Autocad mep 2025 please?

Can you show me how to use 5/8" copper pipe (or any 5/8 pipe)? It's not an option in the StyleManager so therefore i am not allowed to select it on a pipe. Thanks!

Brandon for this topic, now i can edit my Panel! Thanks again and God bless!

I really like the construct tab and how it organized all of the xrefs you need on a project. In researching the project navigator it looks like you can automate the making of views so how. Were you taught how to use the project navigator at your job or did you use autodesk's resources to put it all together?

Only video I've found on the topic, thank you so much. My 2024 version does not have displaybyelvation command, any suggestions?

Please explain in detail and depth about: piping connection settings from colombia - difficult to find the topic on the web

For some reason, labeling ducts seems to be much harder.

Do you know how to represent a soft starter and starter contactors in parallel?

For this I could of read a discrption I thought you where gana show us

I was interested in why you would create a C# class to access Microsoft access data? I asked ChatGPT:- Chatty said:- By combining a C# class for accessing Microsoft Access data with the AutoCAD .NET API, you can automate workflows, enhance productivity, and reduce errors by dynamically linking your design process with a database. This integration can be highly useful in engineering, architecture, and construction projects where designs need to reflect real-world data or specifications stored in databases like Access. I came across your videos because you commented on my nifty access video on pagination a couple of years ago! I mentioned it because I'm responding from a different account ...

Do you have a link to the manual?

I'm new to creating tags and came across this video. Do you know if its possible for have your tag react to status changes of the item its "attached" to? For example, if I have a piece of duct that has a service of "New Low Pressure", and the tag is coming in as a "3D Sizes" label curve style (the appropriate tag for "new" duct work), can I make it to where when I change the duct's system to "Existing Low Pressure" can the tag automatically change to "3D Sizes Existing"?

Turn your phone when videoing.

Question I went to back my car out and seen some transmission fluid on the floor couple of good size silver dollar spots 2013 only has 50,000 miles just nervous if serious or not runs and drives great nervous now because I seen the transmission fluid. What would you recommend?

Man... wish i bought the new bolt first! 😂

Yeah man. That one stubborn lower bolt😅

TYSM YOU SAVED MY UNI ASSIGNMENT !!!!!!!

The humming sound was the serpentine belt too ?

I saw the description, 2mm won't make any difference in the belt, there are 2 kinds of belt, 1 with air conditioner and another without...2mm makes absolutely no difference. Buy a good quality belt, reinforced, the cheap ones stretch and wiggle.

How did u fix it?

Thanks for the video! One piece of feedback, don't say "umm" so much, it's distracting from the content being presented.

Have you managed to return to cycling post surgery? I've had similar pain in my right VMO for over 2 years now having tried lots of stretching and strengthening exercises with no improvement.

I got the same car and the car make a noise and shake to hard when I run down in the hill or up the hill somevary tell me what can be that problem please.

Did you find a solution as I’m having similar issue in right vmo and had it for a year now

Yeah, this video is incorrectly named and misleading. You cannot relocate the internal origin in revit. You are just moving your model elements to align with the internal origin.

Hey I have questions for my autocad I take drafting I want to know can you answer questions or maybe help me with a couple this on autocad?

Good try - thanks. I was hoping you had a solution the rest of the WWW has yet to solve. The use of State Plane Coordinates are very valuable for many "other" uses outside of Revit. They are fine to use in Revit as well. The state plane is like a table cloth under your "site" - the "origin" (SP) does not need to be hundreds of miles away - it can be within the state plane coordinate system very close to your building site. I'd recommend using NGS/NOAA Maps to find "local" SPs - relatively speaking. The issue is the differential relationship (x,y,z) between where model elements reside and the IO. Regardless of whatever "movement" you can perform in Revit, I've yet to see Autodesk come up with a solution for this.

When I use the command PLANTPIDLINELIST to get the VALVE out, but the result is not the type of VALVE I created in the spec, but the software pulls out another valve. How can I get the right VALVE I need? Please help me, thanks a lot!

Which pins to short on connecter

How put a cable on 120V? or is not posible?

This has proven to scale well even with Xrefs that are 800MB in size. Not bad!

I have a very similar issue and knees over toes also didn't help me either. I've also spent over $1000 trying to fix it and the only thing that kind of helped was step downs but it's not a permanent fix. It's like blood rushes into the area and gives me some pain relief then comes back later. i usually just try to ride less than 30 minutes every other day to manage it, but it sounds like you might not be able to do that.

Hi Brandom, if we can't find the breakers plugged in the software, and if we need to add breakers in the software how can it be done.

Got a question here. There's a hook on the bracket there, what does it do? My mechanic removed it after it annoyed him and i have been worried since then

👍👍👍👍👍👍

I was in absolute crisis, I have been panicking because I couldn't figure this out. This video saved the day! Brandon, if nothing else, know that the time and effort you put into this tutorial came to save me. I work in manufacturing, I only wanted to learn how to complete one obscure task using revit. I came upon this problem and struggled to figure it out for hours on end. Thankfully, this is the last place I had to look. Thank you, you are what makes the internet a Gutenberg type revolution.

If it’s three phase, shouldn’t it load as a 208v breaker? Or are they rated for 208-240?

What was it bro

Awesome, thank you!

this looks like more about relocating the project base point and not about the internal origin. the revit internal origin can not be manipulated, like the project base point, survey point can.

Medial Plica Removal Surgery fixed my knee issue. Im currently 3 weeks out of arthroscopic removal of the medial plica and I can already tell it solved the problem. I will be doing a full deep dive including the release of my pain journal, a blog post, and lastly a video on the solution and my journey to get there. 11/Nov/2022 07:47 PM[Friday]

I have two pumps (one single-phase 220V, and one three-phase 400V) on the HVAC level. How can I connect it to my electrical panel?

A Likely Broken/Craked pieces in your Catalytic Converter connected to your exhaust. Will Commonly hppn when hit by things on the ground, like Pot wholes.. Or Speed bumps…

Hello Brandon, any course for beginners that you recommend? Thanks for your help

Any skm freelance job pls pm. Thank you in advance

Hi mate how are you? Im from colombia, but im living in australia, i bought the same car, i cant tell you if is the same problem but, when i put the car im DRIVE or REVERSE, the car start to jump and the revs goes down and up, i replaced the belt but.. it doesn’t work.. can you give me some advice for that?

Hey Brandon, did you figure this out? I have a very similar pain but nothing in the vmo. Have you tried atg split squats? They really helped me strengthen my vmo, which lowered my pain. Kneesovertoes made this pain worse for me, wbu?

PLEASE GET STRAIGHT TO THE POINT MAN. 12 minutes for something that could've been done in 2

Maybe contact and speak to the people at Precision Movement and Upright Health. They both have a UA-cam channel so you can find their info to get in touch with them.

What was the problem?