Відео

You're welcome. Hope it helped, and thanks for watchin!

In my opinion, it comes to money. Same boat just longer. Hope that helps and thanks for watchin.

They are definitely under power!

She's still running like a champ!

Yessir!

Yes, she's a beast and a perfect 1st or second car for a youngster! Thanks for watching and cheers.

It's a fun rig. Thanks for watching

This is the camera... SJCAM C100 Small Thumb Action Camera, 1080P 30FPS Waterproof Sports Video Camera, WiFi Wireless 15MP Imaging with Wearable Accessories for Travel, Sports, Vlog, Weighs 1 oz,(Black) a.co/d/1nG9lxN And I used a chain to weather it to the boat in case it falls off. Thanks for watching and cheers.

@@huntemup72 bro thank you Can you show me how you fix it in boat

@triggeredinsaanshorts4512 I took a small chain and put it on the screw that tightens the camera adjustment and attached the other end to the screw on the trim pads. Make sure the chain in NOT long enough to interfere with steering.

Is this camera is an live camera

It can be used live.

Yeah, I know. Sorry brah

He's a fun little rig! Cheers and enjoy your new RC!

I no I just made this comment but I just order this and the motor and 2 1500 mah batteries for this on Amazon I can’t wait. I’m a kid in a candy store right now.

Ha! I'm 51 and always a kid in the candy store! Hahah cheers my friend!

Yes the body was lowered, the retractable thing is a "janitor" key ring, and about the body panels question... cardboard and hot glue! 🤣 Thanks for watching bud!

Wow..amazing. so creative and cool. Thanks for the reply much appreciated😊

Are you asking about the analyzer? It's the Skyrc GSM020 www.ebay.com/itm/134578143767?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=zkbgvtrxtvo&sssrc=4429486&ssuid=qplepdneruy&var=&widget_ver=artemis&media=COPY

@@huntemup72 nice Thanks !

Not a problem bud.

Honestly, I wouldn't try it. It might run or it could blow up. And to turn it brushless, I would leave it stock with brushed motor. If you want fast, check out the DeeRC I have. It's QUICK! Good luck, thanks for watching, and cheers!

@@huntemup72 i got her this because deerc has put a bad taste in our mouths. I picked her up the 9310 brushed, as well as the 9310 brushless in there plenty fast, but the plastic is absolute garbage and on both models we broke the upper control arm mount that is also part of the gearbox. I don’t wanna risk ruining anything just for some speed.

I do agree about the plastics. Well I hope you find something that work. At least your daughter wants to play. I got two and they want nothing to do with "toys"! Hahha cheers bud.

I just don't like how jumpy it is if you are not careful! Hahhaha cheers

Yeah i wouldnt know all our elements electronics were stripped b4 they were even driven all ive ever run mine w is hobbywing fusions

There is a little delay, but it isn't a $1000 track car either. It dosent bother me, and I seem to have decent air control as well.

Thanks for the sub. I do this stuff for shits and giggles, but I do hope it help or steers people in the right direction. Cheers and welcome to the SHED!

Same platform, bigger tires.

Just ordered 1 of these then had the after thought that 56mm and 58mm tires are hard to comeby i wanna try some of the Tamiya mclass tires the 60d radials to be specific but if stocks hold up long term throttle happy hooning prob be a bit cheaper to try to stock up on the tires for it and the lancia version

I have probably 10 2s packs and 3 3s packs or so, and they still have have tread. I have not run the "rally" tires. They are hard, so they might go fast! Cheers and thanks for watching

@@huntemup72 cool ty ill prob pick up some of the oem tites for now theyre pretty cheap and try fitting m class tamiya tires and wheels later in the year

Amazon... HOOVO 3S 120C 11.1V 1500mAh LiPo Battery with XT60 Plug for FPV Racing RC Quadcopter Helicopter Airplane Multi-Motor Hobby DIY Parts (2 Pack) a.co/d/biF2Kgn

@@huntemup72 awesome thanks! I got my son one, wanna try the 3s in it.

Hey, good to see you brother. She got a new lizard pro, last one burnt up. Well thanks for watching as always and merry x Mas to you and yours.

Thank bud. Table Rock Lake SW Missouri. Cheers and thanks for watching

@@huntemup72Branson.👍

I haven't had that problem. I have beat the crap out of it. Still on stock tires. Hope you figure it out. Let me know if you do. Thanks for watching and cheers.

I have mine at about 2 1/4 or so out. In more than that, I was ripping the axles apart. Hey bud, thanks for watchin and cheers!

Yessir!

On a side note... is that a bug on your picture?

Good info. I do have the punch maxed now, but I will have to get a pinion. Thanks for watching and cheers!

Thanks bud for the info. I do watch that guy, and you are right, he's awesome. Anyways, thanks for watching and cheers!

Thanks Dirk!

Thanks Dirk!

Have you checked the mesh for beingvto tight, or make sure the gears don't have burs. Good luck and let me know. Cheers and thanks for watching!

@@huntemup72 i got it just had to adjust one of the nobs and it fixed it I love it thanks for responding

Got it. Thanks for the input. Always appreciated. Thanks for watching and cheers.

Thanks for the real world review , I will be buying that boat@@huntemup72

No, you can find aftermarket parts on Amazon and ebay. I believe LCRacing, which is the brand the wl toys knocked off, has better parts though. Good luck, thanks for watching and cheers.

@@huntemup72 thanks for responding so quick!

Hope that helps!

Try to heat the screws. They might have used loc tight. Other than that, four screws and maybe a little pry. Sorry for the late response. Cheers

That's awesome. I dint have any 4s batteries, but now I need to get one! Lol! Cheers and thanks for watching!

@@huntemup72 not sure about your boat esc..best to make sure everything is cool on 3s..also the next size diameter prop. Should add performance..also quality cnc props make a big difference...i always tweak cg,strut angles and try a few props before i add more voltage...good luck!

Thanks for the info bud!

I'm out is SW Missouri. Glad you enjoyed and thanks for watchin!

If im ever in mizzou ill hit ya up!!!

Your welcome, and glad you enjoyed! Cheers bud!

All electrics are stock, 2 3s 60c batteries, and I'm running the center diff with stock fluid topped off with 500k (just a little bit) and the front and rear are stock. I just replaced the two bearings with TRB RC bearings from Amazon. It's a fun rig and as of now, those where the only thing broken! Knock on wood. Cheers man, and thanks for watching!

@@huntemup72 what u did when I replaced also from Amazon was put some redNtacky grease to stop them from squeaking and also letting me know it’s time for a swap out of bearings And I’m telling you Bud THAT along with dropping my drop a tad we’re the best things I’ve done to mines as I’ve not had to replace the bearings in a month now where before I couldn’t get a week outta bearings I’ve not long had my best set of 3s lipos die on me 2 sets and now on on 4s punch 6 16t all stock electric apart from AGf servo That really wasn’t needed more than an Itch to do something to him one evening 🙁🤭 after putting in the futaba t4pm radio that was needed to me for the laggy stock remote

Hahaha! Reppin the Fallout Family, brother. Cheers and thanks for watching 🍻

It's a fun truck. If you order the metal diffs, double check the bearing diameter. I have heard that the newer vehicles have a bigger O.D. on the bearings. Thanks for watching and cheers!

And thanks for the sub!

Thanks for the advice bud!

Thanks brother! Thanks for watching, stay Psycho, and cheers bud 🍻

I understood the "bonjour", other than that, no idea so I hope it was good. Thanks for watching and cheers 🍻

he asked if the plastic diffs are sufficient or if metal are a necessity, essentially @@huntemup72

d'après ce que j'ai vu, vous voulez vérifier s'ils sont serrés "les différentiels", ils le sont généralement et vous voudrez les desserrer, peut-être ajouter également un dissipateur thermique au moteur. Personnellement, je vais en métal également sur les engrenages des servos.

Thanks for the help!! Merci!

@@huntemup72 i told them they usually come with stiff diffs. to loosen them up"causes overheating" maybe add a heatsink to the motor . metal is not a bad idea, the thing i had break was the servo gearing. so i suggest the metal servo gears.