Відео

@mojodino3093 it's going to come down to a.) Your size and body makeup, b.) Your budget, and C.) Play style. The replica FCPC V5 isn't bad, I reviewed one on the channel, I thought it was decently stitched, and the materials seemed to be of good quality. But it is 100 percent a medium plate bag. The Emerson has closer to if not large plate bags, it comes with three M4 mag pouches that double stack and the ability to run comms organically. The FCPC V5 can come with a front flap and radio wings depending on where you get it and from which manufacturer. For me, if you are of the correct physical dimensions, I would rock the FCPC, it allows back panel integration, and they are modular, which is a huge win. Inhope you got something out of this reply and I helped you.

⁠@@Muddy_Reviewsthx for the answer my size is like 6’1 and weight 198lbs, do you think it goes well with the fcpc ?

@mojodino3093 so the real question is what is your chest and waist size

@@Muddy_Reviews the chest is like ~40 (100cm) inches and ~35 inches(95cm) for waist

@mojodino3093 you would probably be good with a medium plate bag, so the FCPC repro might be a good option.

@ahole5407 I have both actually, but during the filming, I didn't have them around, hence the analog. Most of my 32oz Nalgenes and canteens are still packed from my final PCS move. Would have been funny if I didn't have those things though.

@Muddy_Reviews I'll let it slide this one time.. seriously though I was hearing nothing but bad things about this pouch and wanted to see it for myself.

@ahole5407 LOL, I appreciate that. I haven't had any issues with this pouch so far and have been liking it.

It will not fit a 2011, but if you run an X300 or TLR-1 light, the Blackhawk Omnivore is a fantastic holster. They also have one that doesn't use a light and cones with small parts that hook to your pistol rail and then locks into the holster.

Giggity

Thanks 🤙🏼

@darrenoconnor8196 I 100 percent agree, but if you solely run an AR platform you get 6 mags capacity and dual radios if need be

if it is rattling there is a good chance the rail is slightly off spec, electrical tape shim to the rescue.

I run L/XL as well, I found I prefer the standard flat pack over the XL but you do make great points.

@@Muddy_Reviews I think the only reason I liked the xl was cause I run hpa, i will say if I didn't have hpa i would run the 2.0 but I do like that it fits on the back of my plate pretty perfectly I run a mepc from defense mechanisms it fits quite nicely so its chill. I will say the molle being in the middle instead of the sides of the bag would be annoying if I didn't run a dual tank setup so u know lol

That makes sense

@leggendobonifico4161 I had good results with my Crossbows and my son had good results with BOLLE X800s but your mileage may vary.

@ Thanks for the answer, I was considering the purchase and the only thing that stopped me was the question of the fog. I hate to use the balaclava with the nose out😅

@leggendobonifico4161 Yeah, I do, too. This one is extremely breathable, Agilite cooked with this one.

@scruffy_texan4002 that's a shame no one else adresses it.

@ shame sig didn’t make it useable

@scruffy_texan4002 so I found out the receiver QDs are usable with a specific Airaoft QD made by Army Armament. Those QDs are shorter and will lock into the shallow space.

@ awesome I’ll check them out thank you

Pretty sure I did a short on these or video.

@nduguasafo1168 yeah so long as it doesn't interfere with the other item. Cool thing is the Orbitals come in numerous size options.

@ragecams well here you go folks this is right from the subject matter experts! Thanks for the comment, and I'm glad you liked watching me fumble through the installation. The Airsoft game was fun, and the replacement lens was 👌🏼.

@@trs._vic solidly a medium.

@MrAdrianMagic took a small drill bit and drilled out the pin, then took small pliers and took off off the muzzle device.

@ I’m guessing there’s no adhesive? It doesn’t look like it on my side but just wanted to see from someone else who also has 416.

@MrAdrianMagic very little to none on mine.

@@Muddy_Reviews another dumb question….currently attempting to drill out the pin to no avail. What bit size did you use?

@MrAdrianMagic I will have to look.

@Snailman0 it's a nice replica, I have a TM Glock17 Gen3 with metal slide I picked up recently and it is really nice.

@@LukavsTheWorld It should work, It doesn't work with Civ wired Airsoft comms, only my.mil wired airsoft comms and real Sordins and Comtac IIs

How long have you been using these?

@@Muddy_Reviews About two years, the QLS clone is solidly reliable. I use it for Airsoft and swapping over my replicas & holster, without needing to strip my belt apart

That's good to know, so far it has been reliable and solid for us as well. My oldest son runs a Safariland glock holster repro, real 6004, and Real Omnivore and the QLS has been a life saver.

@@kylerobinson2723 that is for the folding stock to secure to and then release it.

You should be able to get one in there. These come with an inner piece that sets you up for one.

I do not sadly.

That is interesting. I will have to look into that.

It is.

It was a patch drop from cleared hot. www.clearedhot.team Pretty sure it was a limited drop.

I can agree with that point, LCT isn't cheap for sure, I like the trades on stuff sometimes but for me it isn't necessarily a deal breaker.

@max29pl You are welcome, and glad I could help!

@johnsanzi9391 thanks for the info. I'm not a techy guy, so I don't goober internals.

If I recall they won't secure tan on black.

@jkuoverland8507 Yup, Even when I am thinner I'm still.a bigger guy LOL.

It isn't bad, it is rigid which is to be expected as it is 1601 aluminum. Now I can tell you that is go VERY uncomfortable for me over time due to my hip replacement and the nerve damage I have in my left thigh. I added a SHAW CONCEPTS Sidekick and that has resolved the issue.

Thanks for the comment! I am looking forward to dropping some weight again. The orthopedic injuries are the only thing really holding me back, but as they get sorted one by one, the better it gets. I look forward to revisiting this rig later this year with some weight loss.

I have the Shaw AK RAM, so I'm familiar with the concept as far as M4 inserts go this one from Lunar concepts is probably my favorite. It is very rigid and easy to index, draw, and re-Index.

@@Muddy_Reviews thank you, also would it be a fit in the shaw arc placard?

It might, it fits great in the tracer tactical chest rig.

@NoName-oh6pc I got had! Appreciate the info... time to go aquire some real rails and do a.new video.

It does indeed. I usually have a Gatorade or something similar as well.

Damn that's a great idea, I can't believe I didn't think of that. Appreciate it!

Appreciate that, not the most eloquently put point on my part, but I am glad you could appreciate it

Good to know, thanks for the information and comment.

@Muddy_Reviews yea no prob

X straps are better for smaller frames, the H is superb for broad folks

It is different for sure, but Cyma and most TM spec AK are 14mm negative.

As best I can tell it seems to be one piece, I can look again.

Sadly they do not do delivery.

You are welcome, glad you liked it and got something out of it.

Thanks I appreciate it, glad you liked.the video and got something out of it.

Same, I liked this well enough, but I am enjoying the FMA thick and heavy Opscore lids more. They feel good and are proper thickness but not as heavy as a real lid.

You have to pull down on the lever for extending it.

Man that is a bummer.

Baofeng UV5R.

I like it, but it isn't a MAGPUL that is fir sure.

@Muddy_Reviews yeah if your on a budget it will get the job done, I didn't like it because it felt small/awkward in my hand.

That makes sense, I like AFGs but still love the Zenitco foregrips.