Відео

I am in Canada so the price will be more than US. When I got it it’s about $50CAD a bottle

If you decided to put a real flower in, you might want to add some water for the flower.

I’m glad it’s helpful. I have been using this setup since I set it up in my studio

Glad you liked it! 💕

Thank you! 😊

Thank you very much! Merry Christmas and Happy New Year! 🥳

@YvonneCeramics you are welcome

You’re welcome ☺️ Glad you enjoyed it

You’re welcome ☺️

You're welcome!

It depends. If I work more especially during the busy season, I refill it more often. I could have used a bigger clean water bucket too

That is interesting! I've never heard that before

I painted yellow underglaze and then put on the bead glaze. The underglaze can be painted on either at leatherhard or after bisque firing. After painting the bead glaze, I would do a normal glaze firing

Thank you! Cheers!

@YvonneCeramics you are welcome

Most ceramic supplies store sell them.

💕

If you’re talking about the silicone mold, it also depends on the shape of the mold. If the mold has a huge undercut, it would be harder to demold without breaking it. Another strategy you could try is to dust the mold with corn starch before putting clay inside the mold.

Thank you 🙏🏻

@YvonneCeramics welcome

Thank you! Cheers!

@@YvonneCeramics you are welcome

The glazing video is coming out on Dec 1.

@YvonneCeramics ill be watching 👍

It’s been a while so I don’t quite remember but it could be coyotes mottled blue

Glad it was helpful! 🥰

Hope you enjoy it! 😍

Hello! This is called underglaze transfer and I purchased them from a website called China Clayart or Sanbao. They are specifically made for using on clay and then fired inside a kiln. Hope that helps!

You're welcome!

I wait till around 150 to crack open the lid and then unload when it’s cool to touch

@YvonneCeramics nice! 150f or 150c? =×

Gum improves how brushable the glaze is and Amaco suggests to add gum so I added both to see if it improves

I’m sorry. There’s caption available on the video. Perhaps you could try to have the caption translated to French?

These beads have glaze on them so if they are touching each other, they would fuse together during the glaze firing.

​@YvonneCeramics, what if you want them touching

You can look through my channel

Thanks hun

Glad it was helpful! Can’t wait to see what you will make with your Mason stains

Thanks for your kind words! ❤️

Thanks 😊

I use removable vinyl.

This gold luster is by an American company called Mayco, so I am not sure where you can buy this in Morocco. Sorry 😞

You are so welcome! 🤗

I was curious about this tool so I wanted to show everyone what this is and how it works

Thank you for your kind words and support! Yes, that’s a great idea. I will make a video to show everyone how to make these eyeballs.

It’s the foam people use for seat cushion. I got mine from Michael’s at the fabric section.

I have the Cricut Explore air. But you should be able to use any model or machine that can cut vinyl.

I don’t really measure the wall thickness when I coil build because I can always scrap clay away once it hardens. If your walls are slumping, you probably take the vessel out of the bowl too soon. You need to let the clay hardens a bit first.

Glad it was helpful!

Thank you! I love making small trinkets for Halloween

It’s always so hard to wait for it to cool

Try not to handle them too much especially after rolling them out. You could try to roll your slab on a bat and then cut on it so you don’t have to peel the clay and end up warping it

Thank you 😊 The mold is vintage so you will have to look on eBay or local ceramic studio to see if anyone can make a mold for you

I would wait till the bowl is somewhat harden, so not wet. Then I flip it upside down. I also had trouble taking it out in the beginning but I found that using duct tape to create some kind of a loop and stick a piece onto the form. This way, you would have a way to "lift" the form out of the clay. If your clay isn't wet, this duct tape trick should work.

I got the whole package from the AirPen website. I believe there's different packages you can buy. You can also email the company and they are really good at helping you choose the right cartridge.

It’s spectrum glaze

@@YvonneCeramics thank you!

I don’t have the size on top of my head but I believe it is small, probably 0.5. When I spray underglaze, I water it down instead of using it straight from the jar and I spray many more layers. Sometimes it does get stuck and I need to use water to flush it out.