- 289
- 1 954 205
RDM Woodturning
United Kingdom
Приєднався 2 тра 2020
Join my journey as I go from a woodturning complete beginner, to slightly less of a beginner. Hopefully you will see my progress along the way!
IKEA Kitchen Worktop Bowl - Wood turning
An off-cut from a piece of solid birch IKEA kitchen worktop turned into a unique bowl.
I found the off-cut at my local Rebuild Site www.rebuildsite.co.uk/
The finished bowl measures 180mm x 75mm (approx 7" x 3")
Thanks for watching!😊😊😊
Bowl Sanding tool amzn.to/3FIxYU1
Gouge Chisel Sharpening Jig amzn.to/3LU3sYZ
Charnwood Lathe amzn.to/3KDnkxK
Gorilla Glue amzn.to/3s9LCt3
Bees Wax Oil amzn.to/48h7Jk8
*If you shop through these links, I may receive a small commission. The price is the same for you, but it helps support me as a beginner woodturner in my quest to get a better lathe to make even bigger projects, and I really appreciate it!
Note this is NOT an instructional video, or designed for any education purposes, it is simply my own personal steps on my wood turning journey.
#oakbowl
#woodturning
#rdmwoodturning
I found the off-cut at my local Rebuild Site www.rebuildsite.co.uk/
The finished bowl measures 180mm x 75mm (approx 7" x 3")
Thanks for watching!😊😊😊
Bowl Sanding tool amzn.to/3FIxYU1
Gouge Chisel Sharpening Jig amzn.to/3LU3sYZ
Charnwood Lathe amzn.to/3KDnkxK
Gorilla Glue amzn.to/3s9LCt3
Bees Wax Oil amzn.to/48h7Jk8
*If you shop through these links, I may receive a small commission. The price is the same for you, but it helps support me as a beginner woodturner in my quest to get a better lathe to make even bigger projects, and I really appreciate it!
Note this is NOT an instructional video, or designed for any education purposes, it is simply my own personal steps on my wood turning journey.
#oakbowl
#woodturning
#rdmwoodturning
Переглядів: 3 376
Відео
Yew are stunning! Wood turning
Переглядів 5 тис.День тому
The biggest Yew bowl that I have turned! Beautiful features from the cracks to the curves, everything just works so well together. The bowl measures just over 11" x 3" (280mm x 78mm) Thank you for watching Bowl Sanding tool amzn.to/3FIxYU1 Gouge Chisel Sharpening Jig amzn.to/3LU3sYZ Charnwood Lathe amzn.to/3KDnkxK Gorilla Glue amzn.to/3s9LCt3 Bees Wax Oil amzn.to/48h7Jk8 *If you shop through th...
Ash and Iroko with Green Stripe - Wood turning
Переглядів 3 тис.14 днів тому
The delicate green veneer makes such a difference to this lovely little bowl alongside the detailed foot. The finished bowl measures approximately 134mm x 69mm (5 1/4" x 2 3/4"). Thank you for watching. Bowl Sanding tool amzn.to/3FIxYU1 Gouge Chisel Sharpening Jig amzn.to/3LU3sYZ Charnwood Lathe amzn.to/3KDnkxK Gorilla Glue amzn.to/3s9LCt3 Sanding Sealer amzn.to/3Fcp6EV WoodWax22 amzn.to/3F7pZi...
Sapele and Ash Fruit Bowl - Wood turning
Переглядів 6 тис.21 день тому
A recycled piece of an old sapele door frame plus an idea! This is almost the reverse of a bowl I made late last year, but much bigger. The result is simple but stunning. The extra detail of the red tulipwood veneer really enhances the bowl! It measures just under 12" inches wide and 2 1/2" inches tall (approx 295mm x 64mm). It always amazes me what people throw away. It's not waste until we st...
Oak and Jarrah topped Bowl - Wood turning
Переглядів 4,9 тис.Місяць тому
Sometimes just keeping a simple shape and letting the beauty of the wood shine through is the best option! English Oak with Australian Jarrah. The Jarrah was recycled from The Rebuild Site www.rebuildsite.co.uk/ in Carlisle, originally this was elegant hardwood floorboards carefully removed and repurposed from a local house near Carlisle. The finished bowl measures 127mm x 63mm (5" x 2 1/2"). T...
Yew Branch Bowl - Wood turning
Переглядів 3,2 тис.Місяць тому
Happy New Year - A small piece of yew that has so much potential! Thanks for watching. Gouge Chisel Sharpening Jig amzn.to/3LU3sYZ Charnwood Lathe amzn.to/3KDnkxK Sanding Sealer amzn.to/3Fcp6EV …an absolute essential! WoodWax22 amzn.to/3F7pZig Gorilla Glue amzn.to/3s9LCt3 *If you shop through these links, I may receive a small commission. The price is the same for you, but it helps support me a...
Engineered Oak Flooring into a Beautiful Bowl - Wood turning
Переглядів 7 тис.Місяць тому
I visited my local Rebuild site, which is set up to take surplus materials from construction sites and put them to good use, and I found a piece of engineered oak flooring. www.rebuildsite.co.uk The result is unique and very eyecatching. Thank you very much for watching. Bowl Sanding tool amzn.to/3vCe1dd Charnwood Lathe amzn.to/3KDnkxK Sanding Sealer amzn.to/3Fcp6EV …an absolute essential! Wood...
Beautiful Iroko Bowl - Wood turning
Переглядів 1,5 тис.Місяць тому
Wow, wow and wow. It has been a very long time since I turned a piece of Iroko. It has an amazing orange/brown grain and just stunning markings. I kept the shape very simple, as the wood is the star in this piece. This is only a 175mm x 51mm bowl (7"x 2"), but it is an absolute beauty! Thank you for watching. Bowl Sanding tool amzn.to/3FIxYU1 Gouge Chisel Sharpening Jig amzn.to/3LU3sYZ Charnwoo...
Beech and Sapele stripe Bowl - Wood turning
Переглядів 6 тис.Місяць тому
I found a piece of an old sapele desk draw front and had an idea! This is almost the reverse of a bowl I made last month. The result is simple but stunning. The extra detail of the green tulipwood veneer really enhances the bowl! It measures 6 inches wide and 2 inches tall (approx 150mm x 52mm). It always amazes me what people throw away. It's not waste until we stop using it! Thank you very mu...
Very Chunky YEW Natural Edge - Wood turning
Переглядів 3,7 тис.2 місяці тому
A very cracked and chunky 9 inch Natural Edge Yew Bowl I could have been braver, but I was very scared of the deep cracks. Thank you for watching. Bowl Sanding tool amzn.to/3FIxYU1 Gouge Chisel Sharpening Jig amzn.to/3LU3sYZ Charnwood Lathe amzn.to/3KDnkxK Gorilla Glue amzn.to/3s9LCt3 Bees Wax Oil amzn.to/48h7Jk8 *If you shop through these links, I may receive a small commission. The price is t...
Craft Fair - Tulipwood Tea Light Holder - Wood turning
Переглядів 1,1 тис.2 місяці тому
A small (57mm x 57mm x 125mm) section of tulipwood turned into a lovely tea light holder. I am really happy that I bought the aluminium liners, as they really enhance the quality of the overall piece (and they are a lot safer!). Thanks for watching. Gouge Chisel Sharpening Jig amzn.to/3LU3sYZ Charnwood Lathe amzn.to/3KDnkxK Bees Wax Oil amzn.to/48h7Jk8 *If you shop through these links, I may re...
Oak with Burn stripe and foot - Wood turning
Переглядів 3,5 тис.2 місяці тому
A beautifully simple Oak Bowl. Measures 5 1/4 inches x 2 1/2 inches (133mm x 64mm). Both the burnt stripe and foot detail really add a classy touch to the overall feel of the bowl. It might be a simple design, but the oak is the star here! Bowl Sanding tool amzn.to/3FIxYU1 Gouge Chisel Sharpening Jig amzn.to/3LU3sYZ Charnwood Lathe amzn.to/3KDnkxK Gorilla Glue amzn.to/3s9LCt3 Bees Wax Oil amzn....
Christmas Tree made from a Christmas Tree! Wood turning
Переглядів 3,4 тис.2 місяці тому
Last year's Christmas Tree has been drying in the garage for 10 months. I was determined to reuse it somehow, so I figured why not make it into another Christmas Tree! Thank you for watching. Gouge Chisel Sharpening Jig amzn.to/3LU3sYZ Charnwood Lathe amzn.to/3KDnkxK *If you shop through these links, I may receive a small commission. The price is the same for you, but it helps support me as a b...
Sapele and Beech Fruit Bowl - Wood turning
Переглядів 18 тис.3 місяці тому
I visited my local Rebuild site, which is set up to take surplus materials from construction sites and put them to good use. I found a piece of an old sapele door frame and had an idea! www.rebuildsite.co.uk The result is absolutely stunning! It measures 10 inch wide and just over 2 inches tall (approx 250mm x 55mm). It always amazes me what people throw away. It's not waste until we stop using...
Solid Oak Flooring into a Beautiful Bowl - Wood turning
Переглядів 6 тис.3 місяці тому
I visited my local Rebuild site, which is set up to take surplus materials from construction sites and put them to good use, and I found box with some solid oak flooring off cuts. www.rebuildsite.co.uk The bowl measures 121mm x 51mm (4 and 3/4 inches x 2 inches) Thank you very much for watching. Bowl Sanding tool amzn.to/3vCe1dd Charnwood Lathe amzn.to/3KDnkxK Sanding Sealer amzn.to/3Fcp6EV …an...
Natural Edge Yew Bowl - Wood turning
Переглядів 2,7 тис.4 місяці тому
Natural Edge Yew Bowl - Wood turning
Hiding in the wood pile! - Log to high figured Ash Bowl - Wood turning
Переглядів 2,4 тис.4 місяці тому
Hiding in the wood pile! - Log to high figured Ash Bowl - Wood turning
Wood turning - Beautiful Tulipwood Bowl
Переглядів 1 тис.4 місяці тому
Wood turning - Beautiful Tulipwood Bowl
Branch to a mini vase - 10 minute easy project to sell at Craft Fairs - Wood turning
Переглядів 3 тис.4 місяці тому
Branch to a mini vase - 10 minute easy project to sell at Craft Fairs - Wood turning
Spalted Ash Bowl that nearly slipped off! Wood turning
Переглядів 1,4 тис.4 місяці тому
Spalted Ash Bowl that nearly slipped off! Wood turning
Oak and Iroko with Green Stripe - Wood turning
Переглядів 2,4 тис.5 місяців тому
Oak and Iroko with Green Stripe - Wood turning
Craft Fair Best Seller! - Branch to Tea Light Holder
Переглядів 2,5 тис.5 місяців тому
Craft Fair Best Seller! - Branch to Tea Light Holder
Dark and Mysterious Bowl - Pine and Mystery Wood
Переглядів 3,2 тис.5 місяців тому
Dark and Mysterious Bowl - Pine and Mystery Wood
New CHUCK for my lathe - Very honest review!
Переглядів 2 тис.5 місяців тому
New CHUCK for my lathe - Very honest review!
Sapele and Ash with red veneer - Wood turning
Переглядів 7 тис.5 місяців тому
Sapele and Ash with red veneer - Wood turning
Yew are simply stunning! Wood turning
Переглядів 5 тис.6 місяців тому
Yew are simply stunning! Wood turning
Almost everything that could go wrong did! - Wood turning
Переглядів 1,5 тис.6 місяців тому
Almost everything that could go wrong did! - Wood turning
Oak and Jarrah topped Bowl - Woodturning
Переглядів 1,6 тис.6 місяців тому
Oak and Jarrah topped Bowl - Woodturning
The perfect combination - Sapele and Oak - Wood turning
Переглядів 3,6 тис.6 місяців тому
The perfect combination - Sapele and Oak - Wood turning
Awesome work
Thanks 👍
Nice work as always! Have you tried any segmenting yet? Like cutting blocks out and making rings. I recently did my first one out of purple heart and yellow heart. Take care and GOD BLESS!
Very nice. 😎
Absolutely amazing 👏 👌. Thank you for sharing with us 😊
When we remodeled our kitchen a few years ago, I saved the butcher block countertops we took out. Still have them and now I have an idea of how to use them!😊
Beautiful bowl. Was wondering where you got the emblem medallion from.
I make them myself on my laser engraver. There are people who custom make and sell them on Etsy.
It's beautiful!
Thank you! 😊
This turned out great. I like the finish the best. Seems most people go for gloss but the muted finish shows off the wood to me. I enjoyed video. Thanks.
Thank you! Cheers! 😀
👍👍👍
Thank you 👍😀😀
Excellent work. I used some 40mm oak worktop and it turned out great. Tried again a month later but the wood had started to unglue itself. Used a piece that looked ok but it ended up throwing a large chunk at me. Seriously impressive bruise on the ribs 😬
Ouch! Hope you are ok now. The joys of wood turning 😎
Nice bowl.
Thank you very much 👍
I love it!!! I did something similar a few months ago when I miraculously found an offcut from my birch workshop bench. I cut it down and reglued it up to make a bowl blank and then, added a bit of decoration on the outside (two parallel lines), staining the area between and burning the lines to make them stand out. Reclaiming leftovers from home projects...ABSOLUTELY THE BEST!!!!
Sounds great! I love recycling and repurposing wood.👍
It’s a nice bowl and I thank you for sharing. Four days and three coats of oil is why I use wax 🙂🌞
Thanks. Yeah around half my bowls are now oil, as I love the smell. But yes, the time between coats is painful.
👍😊
Thank you 😎👍
Interesting one with the joinery. Stay safe.
Something a little different, but really effective from a scrap. Thanks for watching 👍
First of all, congratulations, it was a great job. I would be very happy if you could tell me what material you used to fill the cracks.
Just CA glue (superglue) and sawdust. Thanks for watching 👍
Brilliant.
Very kind. Thank you 😀👍
Wow. thats a lovely piece, great figure in an elegant design. Well done!
Glad you like it! 😀👍
So gorgeous...I just love Yew!
So do I! Thank yew for watching 👍👍👍
Thanks 👍
No problem 👍
Very nice, a beautiful bowl, great work.
Thank yew so much 😀
Another piece of art Well done mate Looks amazing👏👏👏👏👏👏👏
Thank yew! 😂👍👍👍
Beautiful 👀
Thank you! Cheers!
Very nice work. Very beautiful.
Much appreciated. Thank you 👍
А что за скотч который вы наклеели на бортик для ремонта? Обыкновенный строительный?
Я использовал клейкую ленту. Очень липкий, поэтому нет шансов на движение. Спасибо за просмотр.
Great looking bowl .wish I had some blanks/ logs that kind of size .thanks for showing us all ,keep them coming.
It's taken my quite a while to find a good landscape gardener to save some bigger lumps of wood for me. Then there's the waiting. This one had been in my garage for 3 years.
Wow! That bowl is just gorgeous! What type of oil did you use?
Parrs Beeswax Oil, it's 100% natural. Thank you 👍
Wow, that turned out really well. I have some plywood, that’s not doing anything. Great work! How many of these have you turned. I am motivated to give it a try. Thanks, Clay
Go for it!!! I've made about 5 plywood bowls, each a little different. It just dulls tools so quickly, so I tend to use carbide for plywood.👍
I have done a few small Yews and yes, they are very pretty. Thats a very nice looking one for sure.
It sure is! The hardest part is finding a good source/supplier of Yew.👍
That’s very nice wood! Great job on that one 👍🏻
Much appreciated, thank you 👍👍👍
Wow, that's gorgeous! I think yew is my favorite! 😊
Mine too! 😀👍
Beayewtiful 😎
I see what yew did there. 😂😂😂👍
Très jolie super boulot 👏🏻👍🏻
Très apprécié. Merci 👍
Way to max out the lathe!!! Any bigger and you will need a bigger lathe.
I'm saving up for one at the moment! But I keep buying more tools and wood 😂
I understand/LIVE your answer. Good luck! You do amazing work, and I always learn from watching you. I adopted your method of creating the mortise. I've copied the angle you hold your skew. And many times I STEAL your ideas. So, thank you, thank you!!!!!
Nice colors, looks good.
Big thank you 👍
I really like that Yew.
King of the woods. Thanks for watching 😀👍
What a beautiful piece. I've seen some turners use the shavings to combine with epoxy to make vases.
If I ever save up enough to buy a pressure pot for resin, then yes it's definitely something that I want to try. 👍
Beautiful bowl, love the shape. Great work!
Much appreciated, thank you 😀👍
Yew did an awesome job on that its beautiful
Thank yew very much 👍
Very beautiful sir have a great weekend
Thanks, you too! Much appreciated as always 👍
Very nice
Thank you very much 👍
Such a nice bowl containing heartwood and sapwood. One reason I seldom use oil is the drying time and I acquired a wheelie bin to hold shavings prior to transporting them to my compost bins 🌞
I'm about an even split of oil or wax, both have their merits, but the drying time of oil is so painfully slow.
That wood is stunning! Such a beautiful bowl.
Thank you very much!
Exquisite! ❤
Many thanks!
Как всегда отличная работа.😊
Очень добрый. Спасибо 👍
Great Job good looking bowl top job 👍
Thank you! Cheers!
Well done!
Thank you 👍
Thanks 👍
Welcome 👍
Awesome save! I had the same thing happen to me with ash also, except while I waited a couple weeks for the resin to cure, the bowl warped so bad it couldn’t be turned.
Things rarely turn out as planned. Wood often leads the way. Thanks for watching 😀
You’re right: wood often leads the way, but sometimes bad resin prevails! 🤣