Відео

I had the same thought. I only have a sample size of 1 so i'm sure many others in the wild do not have the same experience. I racked the slide a few hundred times before i made it to the range because the spring is so heavy. It seems to run all other ammo pretty well. After I made the video, I continued testing. I tried 124gn S&B which ran with no issues. Then i tried PMC 115gn, and that ran with no issues. Now i'm thinking it might be an issue with my lot of PMC 124gn. and not the gun at at all, at this point.

Appreciate it man. I agree with you totally. This is an untapped market, to my knowledge. I don't know of anyone else doing R&D to enhance distance illumination functionality on budget laser options for people who want to get into night vision without breaking the bank.

You might have the cap installed off-center. All you need to do is rotate it to get it centered. I can't speak to cost but unfortunately theres R&D costs, manufacturing costs, lens coating costs, etc. I'm sure that has a lot to do with it.

Stuff is trash yup. Wouldn't trust my life with this pos period

I don't think this is intended to be a life sustaining tool. It allows new night vision users who want to plink on the range to break into the market at a fraction of the cost of other more expensive units with comparable specs.

Appreciate it!

Dremeled a slit on the back of the ghook so I can get the nylon loop in. Similar to how replacement buckles get mounted.

Thank you for the response, how did you attach the ptt?​@@TacOut

@@Fork566 With a PTT retainer off amazon. amzn.to/3ZexbVm

I am. I just threw it together with parts on-hand from regular ARs. It can stand a heavier buffer. The recoil kinda sucks. But that’s my fault.

I’m sure you could see farther with better IR illumination. Just grabbed a RH25 a few weeks ago 😂 but maybe I can get a Fusion 3.0 anyway!

Absolutely right. I mentioned it toward the end of the video. Digital NV with an IR illuminator has no tactical application. The unit could be useful for viewing game at a distance and recording or taking video.

Don't waste your money on digital NV (or do, it's your money) Get a good PVS-14 with a 10yr warranty. Steel Industries in Bradenton FL or T.REXArms both have excellent analog units and 10yr warranty. Digital will get you killed if you ever tried using it in a situation.

I like it and would still recommend it just so you don’t have to “turtle head” to get a sight picture. You’ll also have a better heads up view of what’s going on in your peripheral. Depending on how you’re built, you may be able to use a shorter riser like a 1.93” instead of a 2.26. Just remember your zero will change and so will your holdovers.

It’s the same as the radian. Both made by Azimuth. As well as many other enhanced BCGs on the market.

I like the reckoning. Still using it

Glad you enjoyed it

It takes the surefire pressure pad for their pistol lights.

I'm running a Large cummerbund. I'm obviously overweight at 5'8" 230 lb. Wear a 36 jeans and have a waist measurement of 40" and a chest circumference of 48" (around the back, across the nipples and under the armpits). Hope that helps.

@@TacOut awesome bro. Thank you for the reply. I just ordered a size large and was worried it might be too big but I’m a little on the heavier side, so I think I made right choice. Thanks again.

@@Dino-sk7zi Anytime man! Thats why i make the videos. I don't make any money off this channel. I just post things that can potentially help people. Glad you were able to get something out of it!

Send pics I wanna see! Lol

For me personally, it's still plenty accurate and capable to distance around 600 yards with 77 grain ammo. Better ergonomics in terms of weight distribution when I have the Peq, light and suppressor on, compared to those items being far out on a longer rail. Think front heavy and support arm fatigue. If i am shooting further than that, I will be using a larger caliber, not 5.56. 99% of what i shoot is inside of 100 yards (daytime or under nvg) and on steel or paper targets, so this fits the bill for me. 1% for varmint hunting at night. I guess the answer is, your rifle should be setup to do well for what you intend to use it for.

Best decision ever!

It didnt fit the x300 holster. I dis t have a tlr-1 variant on hand.

@@TacOut Thanks for checking man. Look forward to more content. 👍

Appreciate it. People make it so complicated. All the fear mongering is out of control. Knowledge is way more valuable than carrying a full load-out in most situations.

Some “Amazon special” 1/2x28 thread protector. amzn.to/3ZNS7Dq

@@TacOut Ah, I had those in my list. Thanks

This is one I can’t answer. I tried a Safariland for a x300 and it did not fit. Nor did it fit a trex Ragnarok for a TLR1.

Not if you shoot under night vision. The gl4 pro has an ir illuminator. The GL5 does not.

A week from DHL.

Thanks! It is a bit heavy with the suppressor, light and laser mounted out front but its manageable for sure.

I would recommend emailing their support team to ask. But I dont see why It wouldn’t.

Just the NGAL.

I’m not sure if they will. But there’s definitely no use for the cover on there. It’s just a thin rubber that looks like it’s just a safety cover. I don’t see how they would make a diffuser since the laser and illuminator are all in the same side. But then again, I’m no engineer, so maybe it’s possible.

I guess the idea is guys run these if their main optic goes down and has a QD they can remove them and the weapon system doesn’t go down just because the optic does. I run holosun red dot and magnifier for that reason. The EOTECH have horrible battery life and I’m not risking my skin in a home defense or SHTF scenario where once a month the battery is toast .

Eotech should have a 4 or 8 hour auto-off depending on the button you use to turn it on. Should def last more than a month. But I understand the point you’re making.

Most of my optics are on QD so removing them and defaulting to irons is not unattainable. Def not ideal and absolutely not common to have to do that. Let’s hope I/we never have to do it.

Thats a good idea. I have 2. I should really mod one so I have one of each for comparisons.

ua-cam.com/video/F_JOFSo20SA/v-deo.htmlsi=3RzphruyfcY3KF7l

@@TacOut ua-cam.com/video/F_JOFSo20SA/v-deo.htmlsi=3RzphruyfcY3KF7l

@@TacOutplease do a video comparing the two after you do it!

It held for me but I didn't put many rounds on it yet. I've only had the unit a few days.

Laser speed sent it directly to me. But they provided me the link for eBay and Ali express and they created the coupon code specifically for me.

Do you mind to share the coupon code?

@@TLTL24631 It is in the description section of the video.

@@TacOut Exellent video, this is the type of video that we need. Definitely subbed!!

@@TLTL24631 Anytime man! Appreciate the Sub. I'm getting the other RovyVon GL4 soon too, so we can see what that laser with Illuminator is like for $300 compared to the civilian DBAL. THey still wont send me the FP version though. :(

Im really loving it. Especially the crisp dot and the clear glass with a huge window. m

I have one on my Zev/19x and it is my favorite. Not shot yet but seems good and love to hear this Ordering another for my Dagger put together

Ha, no idea. Guess they left it off and thought we would figure it out. There’s a position between 1 & 3 but it’s not marked.

Thanks for the tips!

I have the laserspped m6 gen 1 and blows a full power peq out of the water, I'm buying the gen 2, it's smaller, lighter, and fixed all my complaints about the gen 1.

I tried to get one of the IS Ngal’s for the review but he didn’t answer my emails. Probably because he’s already months behind from his accident.

I'm curious about the invisiblesight, I thought about it but I've heard the iseg one is pretty much the same as the somogear which I already have. Eventually I'm going to get the ngal mk4 but I may but a couple of the m6 gen 2 first because I've been blow away with my gen 1.

Buy the m6 gen 2 now, then order the ngal mk 4 and wait 6 months.

From what I can tell, the M6 doesn’t have a crane plug for USA pressure switches. Form factor is also different, laser is on the opposite side, it’s larger and is heavier.

You and me both!

Hello. To me it feels just like the same material as a real glock gen 4 frame. But that doesn't mean it's the same material. It just feels the same to me.

@@TacOut ok, Thank you for responding so quick, I have a p80 build but I do not like too much the feel of the plastic, so Imma try a lone wolf if it feels nicer, God bless you dear Friend !

@@GlockSurvival-c6s No problem. Please note that this is also a gen 2 frame. Im not sure if they came out with more recent versions in the last few years since this video was made.

Thank you!