Відео

Dear @ololadeadekunle7098 Your comment means a lot to me. Thank You for this invisible support🙏

Dear @РоманЛукьянов-ю8р 1) Adaptor appear means drivers have been installed. Right!!! 2) Possible solution for Unavailability of Connection a) Plug off then Plug in the external wifi device to USB port. b) Restart your PC. I'll be more happy than you if it is successfully working on Latest Ubuntu version. Thank You👍

​@@aanandkr0me too facing the same issue

@@niranjanvarma8357 Possible solution for Unavailability of Connection a) Plug off then Plug in the external wifi device to USB port. b) Restart your PC. I'll be more happy than you if it is successfully working on Latest Ubuntu version. Thank You👍

I also tried to install a driver for the tp-link t2u v3 wifi adapter on Ubuntu 24.04.01 and Manjaro operating systems of the latest version. I didn't achieve any success on Manjaro, but on Ubuntu the driver got up, the WiFi icon appeared in the system, and the LED on the adapter itself blinked, but unfortunately the adapter does not see the network. I just have an empty list of WiFi networks. I have been trying to solve this issue for 2 days, but so far there has been no success.

I found solution morrownr 8821au-20210708 git.

Dear @foldedfaun790 Congratulations for your brand new tp-link ax1800. I can understand the pain of dependability upon the wired connection. I dont know how should I help you this way. I tried my best to help persons around. Some got benefitted and some were not. Please upload your issue on any social platform to get more attention on the detail. I appreciate your efforts.

Dear @niranjanpattanaik7471 At 3:09 (last part of the video) I've switched wifi adaptor from Inbuilt wifi adaptor ( Intel 8265 / 8275 ) to newly installed TP-Link AC600 600(Archer T2U Plus). 2.4Ghz -- ( Intel 8265 / 8275 ) 2.4Ghz / 5Ghz -- TP-Link AC600 600(Archer T2U Plus). 2.4GHz will detect only 2.4GHz supported wifi connections. Ex- Buddha_2.4G 2.4Ghz / 5Ghz will detect both 2.4Ghz / 5Ghz wifi connections. Ex- Buddha_2.4G Buddha_5 G In my case I've 2.4Ghz / 5Ghz wifi adaptor on both devices...i.e laptop's intel chip as well as TP-Link I wish this way you'll be able to detect if your device supports 2.4GHz or 5GHz. Note: Usually older PC's or low end wifi devices/phones have only 2.4GHz support.They wont detect 5GHz as their HARDWARE LIMITATIONS.

@@aanandkr0 Thank you for your resposne, yes my laptop does not support 5GHz but recently i have purchase tp link ac 600 nano which supports 5GHZ also, so after plugging that device i am still unable to find any 5GHz wifi signal. What could be the problem. i have followed all your advice but still i am facing the same issues.

Thanks Dear @BogSulphur👍

Thank you so much for your kind suggestion, Dear @Lord42O. 🖖 I don't know how my Videos got recommended. Google must be working on some "Shuffle algorithm". The fact is - I'm using UA-cam platform for backing up my Random Videos rather than any other Costly Cloud Platform. Gives me flexibility to watch over multiple devices across the Globe. I have very bad experience of losing data from physical drives in the past. Take Care.

Dear @Embedboii I'm sorry for your inconvenience. I'm unable to resolve the exact issue just through Chats. Yes, it's true that I failed to try this medicine on Ubuntu October (22.10 / 23.10) Versions (Please go through rest of the chat conversation below this video). It works like charm for LTS (April) (22.04 /23.04 / 24.04) version for sure. Let's try for one more time to Conquer this issue.

Thanks Dear @pert-smith 👍 I wish someday we crack Google's algorithm for Video's RECOMMENDATIONS to its Users. Good Luck

Hi @ruslansavustian8291. I'm not sure of it.But please do spread the knowledge if anyway it work for you. Thank You.👍

@@aanandkr0 can you tell me if anything before things on video I should do if I have 64bit system ? Because on git link I read something about config…

@@ruslansavustian8291 I'm not sure of it.

@@aanandkr0 ua-cam.com/video/Yp0PbTZ43K0/v-deo.html This tutorial helped me with version t3u

I'm sorry @Draculachan. I'm unable to figure out at what point your tplink not showing network? Is it before installing Drivers or if you've already installed linux drivers properly. It works best with April's LTS version(ex 22.04, 23.04..).I won't recommend it for October's version(22.10, 23.10..)

@@aanandkr0 it's okay bruv , i switched to windows

@@Draculachan The Best Solution😀

same issue, driver installed but not able to discover networks

Hi @harshalchaware17 Post Step 4 is complex process on NON-LTS version.Might you fail to install it on 23.10.Its true that I failed to install on Ubuntu 23.10. I don't recommend.But if you've already installed 23.10, more than you,Its me who is more eager to know the result. But currently working like a charm on Ubuntu 22.04.4 LTS version. What I like in 23.10: Screen Recording shortcut is easier. Make your Ubuntu Laptop(Old) a Hotspot device on wired internet connection

​@@aanandkr0Well then, I'll not try to install it because I won't be able to debug any errors if occurred during the installation. I already have Ubutun 23.10 though The problem is that the Ubuntu kernel doesn't support my laptop's(Asus Vivobook 16x) wifi card so I don't have Wifi, Hotspot and bluetooth. I always have to use ethernet or usb tethering and that's a drag to use. So I'm looking for external wifi adapters and I don't really want to go to previous versions of Ubuntu because doing that will be a headache for me now.

@@harshalchaware1736 I installed Ubuntu 23.10 on Acer 4738z and Dell 7480. Failed to install Tp-link's device driver on both the devices. Crawled through many web pages and knowledge sources.Most of them have either no information or not accurate solution. Since Ubuntu's October version usually focussed for Pro users, thought better to switch to previous but STABLE version.A clean installation of Ubuntu 22.04.4.I was aware of next steps.And its working like a charm. 👍

I see, didn't know this. So probably this will work when this version is stabilized?

@@harshalchaware1736 ..hope so

Dear @ivory3249. Actual credit goes to the whole team who contributed "source-code" on Github.I just shared my practical approach. Wish we all participate and contribute our valuable knowledge to the Open Source Community. I've just checked TP-Link TL-WN823N. **************************************************************************************************************************************************************************************** The button on the TP-Link TL-WN823N can be used for both Soft AP mode and WPS (Wi-Fi Protected Setup) depending on how you configure it. Here's a breakdown of both functionalities: This mode allows you to turn your computer with the TL-WN823N adapter into a Wi-Fi hotspot. Other devices like laptops, phones, or tablets can then connect to your computer's internet connection wirelessly. It's likely that the button cannot directly enable Soft AP mode. You'll probably need to use the included software or access the web interface of the adapter to configure it as a Soft AP. WPS (Wi-Fi Protected Setup): WPS is a standardized way to easily secure a wireless network connection. By pressing the WPS button on both your router (or access point) and the TL-WN823N adapter, the devices can automatically exchange security credentials and establish a connection. The button on the TL-WN823N is more likely to be used for WPS based on the information you provided ("Easy wireless security encryption at a push of the WPS button"). Here's how to determine the button's functionality: Consult the User Manual: The TP-Link TL-WN823N user manual should clearly explain what the button does and how to use it for both WPS and Soft AP mode (if supported). You can find the user manual online by searching for the model number and "user manual" or visiting the TP-Link website's support section for your specific model. Software Utility: The included software for the TL-WN823N might also have an option to configure the button's functionality. **************************************************************************************************************************************************************************************** Keep Supporting. Thanks for sharing your experience..👍

Dear @jogosnamemoria90 Actual credit goes to the whole team who contributed "source-code" on Github.I just shared my practical approach. Wish we all participate and contribute our valuable knowledge to the Open Source Community. Keep Supporting. Thank You.👍

I'm sorry mate. But I found these general solutions online :- Ensure you have a stable internet connection. Try refreshing the connection or switching to a different network if possible. The server you're connecting to might be experiencing temporary problems. Try again after some time. If you're transferring a large amount of data, it might be exceeding the configured buffer size. Try increasing the buffer size using the following command (replace <url> with the actual URL): git config http.<url>.postBuffer 524288000 Some servers might have issues with HTTP/2. Try forcing HTTP 1.1: git config http.version HTTP/1.1 If you're using a proxy server or firewall, try temporarily disabling them to see if it resolves the issue. Re-enable them if it works. Setting the GIT_TRACE environment variable to 1 might provide more details about the error in your terminal. Hope it would help you. 👍

Alr ima try cuz this is my first time using Ubuntu and if I mess this up I’m gonna need to reinstall Linux

@@aanandkr0 I got it working. I had to connect with ethernet cable and install. Thanks for the solution!

I really appreciate your invisible support. Thanks.👍

I'm sorry for your loss @LeandroJunqueiraBenedini But your reply made me to do R&D again.I've successfully installed on Ubuntu on older version(20.04) when I stuck at Step4. I have updated video description and provided this link github.com/aircrack-ng/rtl8812au Please go through if it work for you too...👍

You welcome Dear @sameerabbigeri8807 👍

¡De nada! Me alegro de poder ayudar. Si tienes más preguntas, no dudes en preguntar.

I am still unsure of your comment.But Yes I want to draw your attention about online shopping.Some products are REFUNDABLE and some are just REPLACEABLE.Suppose I buy any wifi adaptor.It worked with Windows as company provided the drivers.But on some occassion if I switch to another OS,we need to brainstorm for drivers.Hope you would have a nice experience.👍

Hi @mikethomas2024 I rechecked my video between 1:39 - 2:20 for downloading the file "git clone github.com/aircrack-ng/rtl881" and accessing to downloaded directory. probably using the HTTPS clone URL for the repository requires password. Using an HTTPS remote URL has some advantages compared with using SSH. It's easier to set up than SSH, and usually works through strict firewalls and proxies. However, it also prompts us to enter your GitHub credentials every time we pull or push a repository. Password-based authentication for Git has been removed in favor of more secure authentication methods. Once we configured credential caching, Git automatically uses our cached personal access token when we pull or push a repository using HTTPS. for more information: t.ly/sWjbd

Spread love... Share knowledge. Thanks👍

Thank you Dear👍

@aanandkr0 when I restarted the system again, did not recognize the adapter. Do I need to do this every time I start the system again?

Hi Dear, Those codes works as drivers for the TP Link.Once it got installed on OS, it remain installed on the OS until you make any change in SW part.Just Plug and Play by DISABLING inbuilt wifi adapter from the setting.So whenever you plug tpLInk,it automatically detects available source for connection.@@deepanshupanwar501

@@aanandkr0 It is still not reading. I don't know what I am doing wrong. I do not have an inbuilt wifi adapter. Only the external TP Link one. The drivers are installed since I checked again. Please help.

Ok.Dont worry.Dont get panicked.You may start from the beginning.This thing might help you if it worked on your system earlier.@@deepanshupanwar501

Thank You Dear @sotoskun861.Keep sharing the knowledge.👍

Obrigado a você também, querido @nunovski2002 👍

Генту Линукс. Я не уверен, работает ли это как Ubuntu. Все, что я могу предложить, это ПОПРОБУЙТЕ на свой СОБСТВЕННЫЙ РИСК.

Приятно получить ваше внимание к моему видео с положительным комментарием. Спасибо.👍

Hello Dear. Reasons bahot saare ho sakte hain adaptor not found se related..

Just break the ice on some occasions in 🧬

Thank You Dear @reactivicky.Keep sharing the knowledge.👍

Thank You Dear @user-if1iw8dg5q.Keep sharing the knowledge.👍

Thank you Dear @piyushbisht756

Hi. To switch from a 2.4 GHz network to a 5 GHz network, you typically need to follow these steps: 1. Check device compatibility: Ensure that the device you want to connect to the 5 GHz network supports the 5 GHz frequency. Most modern devices such as smartphones, laptops, and tablets support it, but older devices or some Internet of Things (IoT) devices may only support 2.4 GHz. 2. Determine router compatibility: Verify that your Wi-Fi router or access point supports a 5 GHz network. Not all routers offer both 2.4 GHz and 5 GHz frequencies, so check the specifications or user manual of your router to confirm. 3. Connect to the router's configuration page: Open a web browser on a device connected to your current Wi-Fi network and enter your router's IP address in the address bar. This IP address is typically printed on the router itself or provided in the user manual. Common IP addresses are 192.168.0.1 or 192.168.1.1. 4. Log in to the router: Enter the username and password to access the router's settings. If you haven't changed these credentials, they are often found on the router itself or in the user manual. Alternatively, you can check the manufacturer's website for default login credentials. 5. Navigate to wireless settings: Once logged in, locate the wireless settings or wireless configuration section in your router's interface. This may be under a "Wireless" or "Network" tab. 6. Enable 5 GHz: Look for an option to enable or configure the 5 GHz frequency. It may be labelled as "Wireless Mode," "Network Mode," or "Band." Select the 5 GHz option or dual-band mode if available. 7. Save settings: After selecting the 5 GHz frequency, save the settings. Your router may require a restart for the changes to take effect. Follow any prompts or instructions provided by the router's interface. 8. Connect to the 5 GHz network: On your device, open the Wi-Fi settings and search for available networks. You should see your newly configured 5 GHz network listed alongside the 2.4 GHz network. Select the 5 GHz networks and enter the password if prompted. 9. Verify the connection: Once connected to the 5 GHz network, test your internet connection by visiting a website or using an app that requires internet access. If the connection is successful, you have successfully switched to the 5 GHz network. Remember that the 5 GHz frequency generally offers faster speeds but has a shorter range compared to the 2.4 GHz frequency. So, if you're experiencing weak signal or connectivity issues, you may need to be closer to the router or switch back to the 2.4 GHz network. ------------------------------------------------------------------------------------------------------------------------------------------------------ 2.4 GHz नेटवर्क से 5 GHz नेटवर्क में स्विच करने के लिए, आपको आमतौर पर इन चरणों का पालन करना होगा: 1. डिवाइस संगतता जांचें: सुनिश्चित करें कि आप जिस डिवाइस को 5 GHz नेटवर्क से कनेक्ट करना चाहते हैं, वह 5 GHz फ़्रीक्वेंसी को सपोर्ट करता है। अधिकांश आधुनिक डिवाइस जैसे स्मार्टफोन, लैपटॉप और टैबलेट इसका समर्थन करते हैं, लेकिन पुराने डिवाइस या कुछ इंटरनेट ऑफ थिंग्स (IoT) डिवाइस केवल 2.4 GHz का समर्थन कर सकते हैं। 2. राउटर संगतता निर्धारित करें: सत्यापित करें कि आपका वाई-फाई राउटर या एक्सेस प्वाइंट 5 गीगाहर्ट्ज नेटवर्क का समर्थन करता है। सभी राउटर 2.4 गीगाहर्ट्ज़ और 5 गीगाहर्ट्ज़ फ़्रीक्वेंसी दोनों की पेशकश नहीं करते हैं, इसलिए पुष्टि करने के लिए अपने राउटर के विनिर्देशों या उपयोगकर्ता पुस्तिका की जाँच करें। 3. राउटर के कॉन्फ़िगरेशन पेज से कनेक्ट करें: अपने वर्तमान वाई-फाई नेटवर्क से जुड़े डिवाइस पर एक वेब ब्राउज़र खोलें और एड्रेस बार में अपने राउटर का आईपी पता दर्ज करें। यह आईपी पता आमतौर पर राउटर पर ही छपा होता है या यूजर मैनुअल में दिया जाता है। सामान्य आईपी पते 192.168.0.1 या 192.168.1.1 हैं। 4. राउटर में लॉग इन करें: राउटर की सेटिंग तक पहुंचने के लिए यूजरनेम और पासवर्ड डालें। यदि आपने इन क्रेडेंशियल्स को नहीं बदला है, तो वे अक्सर राउटर पर ही या यूजर मैनुअल में पाए जाते हैं। वैकल्पिक रूप से, आप डिफ़ॉल्ट लॉगिन क्रेडेंशियल्स के लिए निर्माता की वेबसाइट देख सकते हैं। 5. वायरलेस सेटिंग्स पर नेविगेट करें: एक बार लॉग इन करने के बाद, अपने राउटर के इंटरफेस में वायरलेस सेटिंग्स या वायरलेस कॉन्फ़िगरेशन सेक्शन का पता लगाएं। यह "वायरलेस" या "नेटवर्क" टैब के अंतर्गत हो सकता है। 6. 5 गीगाहर्ट्ज सक्षम करें: 5 गीगाहर्ट्ज फ्रीक्वेंसी को सक्षम या कॉन्फ़िगर करने के लिए एक विकल्प देखें। इसे "वायरलेस मोड," "नेटवर्क मोड," या "बैंड" के रूप में लेबल किया जा सकता है। यदि उपलब्ध हो तो 5 GHz विकल्प या डुअल-बैंड मोड चुनें। 7. सेव सेटिंग्स: 5 गीगाहर्ट्ज फ्रीक्वेंसी सेलेक्ट करने के बाद सेटिंग्स को सेव करें। परिवर्तनों को प्रभावी होने के लिए आपके राउटर को पुनरारंभ करने की आवश्यकता हो सकती है। राउटर के इंटरफेस द्वारा दिए गए किसी भी संकेत या निर्देशों का पालन करें। 8. 5 GHz नेटवर्क से कनेक्ट करें: अपने डिवाइस पर, वाई-फ़ाई सेटिंग खोलें और उपलब्ध नेटवर्क खोजें। आपको अपना नया कॉन्फ़िगर किया गया 5 GHz नेटवर्क 2.4 GHz नेटवर्क के साथ सूचीबद्ध दिखाई देना चाहिए। 5 गीगाहर्ट्ज नेटवर्क का चयन करें और संकेत दिए जाने पर पासवर्ड दर्ज करें। 9. कनेक्शन सत्यापित करें: एक बार 5 गीगाहर्ट्ज नेटवर्क से कनेक्ट होने के बाद, किसी वेबसाइट पर जाकर या किसी ऐप का उपयोग करके अपने इंटरनेट कनेक्शन का परीक्षण करें जिसके लिए इंटरनेट एक्सेस की आवश्यकता होती है। यदि कनेक्शन सफल होता है, तो आपने सफलतापूर्वक 5 GHz नेटवर्क पर स्विच कर लिया है। याद रखें कि 5 गीगाहर्ट्ज़ फ़्रीक्वेंसी आमतौर पर तेज़ गति प्रदान करती है, लेकिन 2.4 गीगाहर्ट्ज़ फ़्रीक्वेंसी की तुलना में इसकी रेंज कम होती है। इसलिए, यदि आप कमजोर सिग्नल या कनेक्टिविटी समस्याओं का सामना कर रहे हैं, तो आपको राउटर के करीब रहने या 2.4 GHz नेटवर्क पर वापस स्विच करने की आवश्यकता हो सकती है।

Thanks, Sinie Sinie👍