Відео

I’m currently editing this video to post it

@@Frank_tha_tank1 cool cool because I'm debating doing this myself and I was curious to see how it worked out

yeah, I will see if I upload the vid by the end of this week but it's pretty simple, I installed some Recardo seats on my 280z and got some metal flat bar from home depot to do the installation.

So far 3 weekends on the water and they sound great

@@Frank_tha_tank1 what is your full setup

@NoahDever So the factory radio, we left connected due to the fact that it is incorporated with the tablet at the steering wheel, but what I did was I spliced from the factory radio there is a •(ORANGE) wire that is called (RAD OUT)that is my •12V trigger Which is the RED wire on the aftermarket radio I ran a •12V battery wire is a constant which is the YELLOW wire straight to the battery on the aftermarket radio that is feeding the radio at Factory radio - orange 12v trigger Black ground Aftermarket - yellow 12 constant Red trigger Black to black Note you will lose control to ur steering wheel control I have a 800 x4 1ohm stable 2ohm bridged Each channel has 2 -4 ohm speakers parallel giving u a 2ohm load at the amp And 3k running at 2ohm giving u 2025 watts final load As far as speakers I have 6 (4 skar)6.5 speakers 2 8 inch skar voice speakers 2 10 inch skar subs

Yes, absolutely I tow a lot and this helps like you wouldn't believe.

@@Frank_tha_tank1 Thanks for the info! Have a good one

@@heffaynekoguy687 yeah I said the same thing when I seen the product I used to do it the old school way and always get shocked lmao but here the link a.co/d/jaiShWJ

It will shock you lmao that I can’t show you lmao

😵🎉

Using this machine I found 2 bad spark plug not the ones in the video. But this device can definitely help you identify a bad or weak spark plug.

"testing" device not demo device

Yeah honestly you can even turn it off if you have a Diablo tuner but the stock cam is different than the non MDs cam for what I’ve read online.

@@Frank_tha_tank1 I turned it off with a tunner and I think it messed up my car

@glockboiidez why you think that ? Or what is your car doing ? I think you need to change the lifters and cam for turn that feature off

@@tayceknerr5620 I’m currently working on getting my car to have the proper air fuel ratio once I figure it out I wouldn’t mind helping you out

If you don’t mind me asking what are you having trouble with?

Im not sure they are still making this one. a lot of ppl had issues with vibrations at high speeds. stock might be the best option at the moment. hope this helps

where are you located? I can sell you mines I personally went back to stock since. if you are still interested let me know.

I have an after market intake but I’m should you will need to disconnect it. And if you can’t fit Under the the car you may need to lift it

Thank you

Yes it does. You will get a misfire on a cylinder

Yeah that’s what ima do with the new axle my dad had that idea. Thanks for the suggestion

😂 yeah sure buddy great 👍 idea

I’m going to just get a new axle runs about $130

It’s a total of 4 main bolts for the ride plate and a other 4 small bolts for the speed sensor.

I cannot say that what I’m about to tell you is a fact. But the reason I believe it foul them out when you just let the car idle is because this is a self tuning system the ecu doesn’t know the correct air to fuel ratio it needs yet.

For sure, I’m just having a problem getting the spark plugs fouling on me when I try to test drive it for it to self learn. :/

@@new_bright_0362 all the other settings are good ? Have you checked for any vacuums leaks ?

most of everything thing looks good? would I need a whole exhaust system? I just have the 02 sensor welded on the header line pipe.

I posted a SHORT video of it dying if it gives you an idea

It's been holding up good. but as other have stated its a hit or miss because some have experienced some slight vibration at high speeds. Due to that issue if you can find a used oem one in good condition do that.

what part of the driveshaft failed ?

Yes they are but remember just installing speakers without tuning the amp is like having stock speakers. you need a tune to get the most out the speaker and have them in a safe range.

thank you i wish you the best of luck on your build.

Yeah my friend my ig is frank_tha_tank1

And welcome to the Datsun community

My issue was a bad speed sensor. You should Get a code reader it will tell you what side you have to change.

www.ebay.com/str/wellerautotruckparts?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=7Qb_39WcSmG&sssrc=3418065&ssuid=fMpVift6Ql6&widget_ver=artemis&media=COPY try that

Que partes hay que cambiar

El palo de leva

thanks, lucky for me the owner gave me a bunch of extra parts when i brought the car.

Yeah this was my trail run b4 I paint one of my project cars

@@Frank_tha_tank1 it looks fantastic, and there is nothing wrong with a trial run to get those perfect visions

I used some universal v8 mounts from eBay

@Frank_tha_tank1 alright I appreciate it I'm doing a k24 in a roadster with s2000 trans getting a lot of help what I need to do from your videos thanks man

@Frank_tha_tank1 what diff did you go with ?

@@prestonlemka9096 i haven't addressed the rear end yet im thinking of just getting a lsd unit for my set up. im sure they are other options out there but im am trying to avoid haveing to completed change the actual car.

The primer stuck too it just fine the base coat is the issue

yeah, I have a couple.

@@Frank_tha_tank1 All working nice? Selling?

When you apply the tune it will turn them off anyways for what it’s worth it’s not worth the hassle to try and remove them

Hey i removed mine and broke them im doing the delete but now i have the connections open do i just leave them in there like that cut them off ?

Hmm I would say a few weeks

The jacks stands are put on the metal bar that’s god across the bottom of the transmission. You can put the jack stands where ever you want that’s makes the car secure to you. I was on a flat surface so it wasn’t that big of a deal.

Dyou have a bracket that holds them? and where did you buy it from, I'm going to look into this system.

In my honest opinion it’s always worth it if you can get the engine to run cooler. ESPECIALLY on jet skis where the engine is being ran at very high rpm’s for very long periods of time. And no I didn’t change my thermostat out.

Thanks for the feed back. I did it to my 19 SVHO but didn't think I needed it on my wife's FXHO. I am doing Rivas Thermostat delete, she doesn't really ride hard. Again thanks

Nope no issues at all this is a plug and play

Luckily it wasn’t that it was a bad rear speed sensor

Truth be told my seats have held up pretty well but I would like to point out that this isn’t a daily driven car I’m not sure if that can affect the outcome of the dye. But I was able to Let these cured a couple of weeks b4 I even got in the car and sat down.

@@Frank_tha_tank1 definitely good to know it’s going in my 2000 Mustang gt which isn’t my daily driver so it’s worth a try, doing a full interior swap so figured I’d give this a go better than spending 1300+ on a new seats

@Lifted18eco yeah that’s what I did with my recaro seats and it saved me having to reupholster the seat in black and stand 1300 bucks just make sure to do a few light coats first then hit it with an heavy coat

@@Frank_tha_tank1 they definitely look like they turned out really good! 😎 my current seats are tan and I’m going to a dark charcoal interior so I think this route will work good, I’m going to use wax and grease remover to prep the seats then clean them with soap and wipe them down real good

@Lifted18eco let them air dry for a while after the deep cleaning I notice when I did it that the leather absorbs water

Thanks man I got her up and running today

Yeah I’m aware lol