Відео

Thank you so much ❤

Enjoyed the tutorial. That said, I get to start all over and try again. I printed everything but didn't have the option to put the sheet to print at 100% so I turned on borderless instead. Figured I would try it both ways. When I got to the Cricut part, I realized my png was created at 8x11 instead of 8.5 x 11. Sure enough, that messed everything up. Back to the drawing board (Procreate)!

I went against your wishes and used this as a tutorial. It turned out wonderfully, thank you so much!

Hi, thank you so much for this video. I have a question, since I'm having some struggles with the measurements. (I watched literally every video on YT regarding this trick/hack) I can't figure out how to do this trick with A4 sticker paper, since Cricut asks me to load a longer mat, (if I resize it in Photoshop, and make it smaller, the margins/squares wouldn't be positioned right for the A4 paper. I really don't know what do to. I'm trying to start my sticker business, but Cricut is giving me a really hard time, especially because the tutorials are all in Us Letter versions (even if I use the converter, the cut is still somehow off for a4, (even with all the tweaked settings) :(( Could borderless printing be a problem? I hope you can help me, you'd be an absolute life saver. ❤️ PS. your art is incredibly pretty and I wish to have such skill someday ^^ - Lux

I must have missed something because my "I tried" magnet designs cut right through the design, whelp... "I tried" lol my printer settings don't have the 100% scale option just fit or fill. I suspect that's the issue.

So helpful!!

Could I ask how you ordered the sample papers? When I go it seems to have stuff already printed onto it which isn't helpful in seeing how my own printer handles the paper :( Also these are cute tea owls awww

Apparently my Cricut decided to start shifting the cuts upwards by 3mm, searched everywhere and found its an issue which cricut is aware about and labels it as "tolerance limit" which is bad as the sheet after being cut halfway starts to cut badly.

Hi I have a tip for the outline so that you don't need to duplicate it a bunch x) Duplicate your drawing you want the outline on, hold two fingers on the duplicated drawing and it will automatically select it for you, press color fill at the bottom and make sure its the color you want your outline to be, tap feather and choose the % you want your stroke size to be, press the selection button at the top so it lets go of the layer and then press it again, press automatic and with color fill still activated press on your drawing and slide your finger to make it more opaque! If your drawing has multiple things in it you can tap on each of them and make them all different or all the same :) I hope that makes it a little easier for you! ♥

I’M SO HAPPY THAT I CAME ACROSS YOUR VIDEO!!! You explained everything so well and I’m so happy that this is really easy to replicate :,)

This was so amazing! I've been going crazy with the waste of paper that the Cricut leaves in its wake. Thank you! I actually found this video looking for how to make sticker sheets with procreate and now I learned 2 new things! Thank you.

I didn’t like the Joyeza paper either!! I’m returning it today lol. I got those labels too but I feel their paper is too thin and I don’t like it for my sticker sheets. They have great shipping and such, but I found j and j packaging on Amazon and it’s thick and nice nice vinyl on it. Thank you for sharing this video too I hate the cricut print and cut I find it lowers the resolution of my art too particularly if it’s vector… something you can do with the matte paper is after it’s printed put a laminate sheet on it to protect it and make it shiny.

I know this is an older video but you could also use Kraft bubbler mailers for your coasters.

Hi, I just found your channel, I am so excited to follow along but I am new to procreate and it’s hard to follow. Do you have a video for beginners? 😊

What is the purpose of the tape on the mat exactly? I see so many doing it but no actual explanation as to why

is that the cricut maker 3?

Thank you so much for sharing this! 💖 I've been trying to solve this issue on my own for a few days now since finding the right tutorial was a little tough. Thankfully, your video has been recommended to me! This is such a big help. I almost gave up using my cricut for a project because the amount of extra space is just bothering me 😅

What is your sticker paper size? Because I have a gap when I cut the border of the pad, it is wider and narrower than the sheet.

Great vid..I am having trouble with the margins..my cut is off from the top of the image..left and right margins line up correctly..what is actually cut out does fit the image I created it just won’t line up from the top of the cut

Tried this and it sadly didnt work for me 😞 im using photoshop to edit the files, initially used it to print and made sure all sizes are correct, I even tried to print it first and create another cut file base on the sizes of the printed sticker but it still doesnt cut in line, sometimes it will cut too big, sometimes it will cut really out of the line. Tried to print it outside photoshop, still a no :( too bad. This tutorial is very detailed and she's also good at demonstrating and explaining. At this point I'm not sure anymore if the problem is my printer or my cricut or the software I am using to print the sticker. I really want to maximize the whole page but I guess I dont have a choice this time but to print and cut just directly throught design space 💔 I hope cricut will soon allow the full page cutting.

Tutorial starts at 4:40

This was super helpful, thank you for sharing the tape trick again I’ve seen others do it, but didn’t understand it. You’re also super pleasant to listen to and learn from so thank you. You’ve earned a new subscriber!

I've been trying this method but can't get the cut to align correctly. Everything is set to exactly how you have it and yet when I go to cut, only 1 image comes out ok, the rest are all misaligned. what am I doing wrong??

Can this be done without the tape?

This is a great video! I don't have a Mac or Photoshop, do you know what I could use to resize my images for sticker sheets without getting the blur/pixelation I get resizing on Procreate? Thank you!

Best sticker set up I’ve seen yet, terrific job!

This is actually incredibly helpful! I hated that waste of paper when you do regular print&cut. Going to try it myself now 😍

Ps, Can you just use the ‘offset’ function on Cricut (to make the white border)? x

Ps, Is that a Dicentra / Bleeding Heart flower on your sticker sheet? It's one of my favourites. Mine lasted many years but it must have died off. I need to buy another one 💕 x

Thank you so much. I subscribed purely on the fact that you watered your 'little one' / plant and turned it around to have more sunshine...aww 👏👌. I then continued watching the video and I will revisit making my sticker sheet again. It was a bit of a disaster yesterday but I'm not giving up. Your video is much better than the other video I'd watched on a different channel x

Earth day is the same day as my birthday :)

What if you were to seal the stickers with some krylon clear coat spray? That’s what I do with my water decals that I use on my nails. Great video even though I know it’s a year old😁

You'r very talented. Keep it up!!

Cute stickers

Im having issues when i print its just printing off the page... Its really frustrating as im trying every possible thing to fix and its just not working.. I print on uk a4 and all the sizing is right on my print files and when i print its cropping my file.

What is that tool that you are using at the beginning of the video?

What program do you use to print? Is there a reason you don’t print from the iPad? (My computer isn’t great so I try to avoid usuing it unless mandatory) but I could not figure out how to scale the print size on the iPad

What happened? Where did you go?

I really enjoyed this tut since I dont use photoshop or illustrator. The only thing that confused me was the need to tape a guide on the mat.... Thanks

This video was just what I needed. Concise, explained, & informative. Thanks a million ☺️

Is there another way to do this without having to draw your own stickers?

Excellent video! I’ve been searching this information

Do you ever have a problem with your cuts drifting or being misaligned when doing this? I’ve been trying to figure this out and my cuts will drift as much as 1/8” by the end of the paper.

Another great explanation. Charming artwork. They are adorable. I have been spray varnishing my stickers. Am experimenting with even spraying the vinyl to lengthen their lifespan. Do you test light fade? The uv light can be calculated to represent one year. Though I am thinking mine need to survive the weather. The trick is very easy when you explain it, for the tiny squares. That will definitely save us all products. Thanks for sharing.

Thanks for sharing. Great tips.

If you really want to print more stickers on 8.5 x 11 ... try this method. ua-cam.com/video/zb3dHTe-U_w/v-deo.html

I just recently purchased my Cricut and my goodness this is the most thorough and easy to understand tutorial I’ve seen, thank you!!!

thank you for this trick! I did exactly as followed, lining with painter's tape and cutting out a 8.5x11 shape. However when it cuts a sheet of stickers, I can still see that there's some misalignment due to uneven white borders around the artwork. Something just seems off. Would running print then cut calibration help at all in this case? I've been struggling for so long now trying to get even white borders around my stickers. I would so appreciate any help, thank you!

Thank you so much for this! It's been so hard to find a tutorial on kiss cut stickers without using Photoshop 🙏🏼

In procreate I haven't found a way to change sizes to inches instead of pixels when resizing an element of the canvas. I can set up the document in inches but the measurements while creating are in pixels.