Відео

There is a male female cable with metal tip... it will fitted well ..and you need to add sone epoxy glue in it to fix it permanently ..

@@SonuKumar-ff1ktold Nokia Round Pin (for nokia 1600 phone .)

@@BiswajyotiDIY how mm size?

@@SonuKumar-ff1kt 3.5mm

No...as the uv glue is very trasparent ...

@@banglagaming3185No.. I am from Assam...and I bought it from Jorhat ...

@@BiswajyotiDIY ok thanks

@@flavours_of_kerala No... venue's boot lamp is in different shape ..

@@BiswajyotiDIY thanks bro. Venue S 2023 dont have boot lamp. How to get it. Its does have a slot that is covered with a plastic cover. Does it have a wiring behind to the coupler to coupler fitting?

you can check it yourself by removing the plastic cover .. i think there should be a small coupler to fit the boot lamp..if there is a coupler then you may order it online or offline .

@@BiswajyotiDIY Ok thanks. I will check

I cleaned it with isopropyl alcohol...Thanks for watching ..😊

😂😂😂😂😂😂

Mine is Asus X515EABQ312TS ...if it is not available with your model then you need to buy it separatley ..Thanks for watching ..plz subscribe for more videos ..

I bought it from offline market ..Thanks for watching ....plz subscribe for more videos

@@BiswajyotiDIY ohh...bdw how's the phone...I just ordered today

​@@battleboykmpdIt's an alrounder phone .. has some unique features such as Sony camera with Horizon lock , moto gesture ,144hz FHD+ pOled display , IP68 rating , Dolby Atmos ,Dual Speaker , Hi res audio wireless etc ..

All screen guards are the best ...but UV glued glass is more durable .

​@@BiswajyotiDIYPrice kitna hoga bhai

@adnanahmad_26 It depends upon quality , I got it for Rs 150 in the local market .

please pin uv tempered in this comment ​@@BiswajyotiDIY

Thanks a lot for your valuable suggestion ... Thanks for watching

Front USB port is already uploaded ...

You need to repartition the new ssd from the device manager .

এক দম ।

you can buy it from www.boodmo.com

You can buy it from a local electronics shop or online.. it is called "USB male female Cable " .

How much it cost at shop ???

শিৱসাগৰৰ শিৱৰাত্রী মেলাত পায় ।

You can buy it from www.boodmo.com

Pls item name and link send me...

Yes...Charging speed is very slow as it is only made for pendrive and android auto.. better you may go for a quick charger for the cigarette lighter port of your car..

@@BiswajyotiDIY thanks for replying

Thanks for watching ...

Yes...but you also needed to carry a charger ..and it's so irritating to remove the batteries to charge each time

The size of the 18650 battery is thicker than BL5C . it does not fit inside the radio as the Xhdata D219 Radio is very Slim.

because there is no space inside the radio to fit the 18650 cells.

@@BiswajyotiDIY Could you not make a powerbank with the 18650 cells and plug it into the 5 volt port of the radio ?

Yes ..but it would not be handy with the external power bank .. 😊

i have bought reachargeable aa battries using them

You should connect the charging module input to the 5v input pin of the radio and the charging module battery output to the battery terminals with a 3.3v boost and Buck converter regulator

I have connected the BMS into the 5v socket of the Radio and connected the battery output to the battery terminals as the BL 5c Battery Provides 3.7V output.and it has an inbuilt bms circuit which converts the 5v into 3.7v ..

BL5c battery inbuilt protection board doesn't convert 4.2v to 3.7v and it is just to protect the battery from over draining ie: less than 2.4v so that the lipo doesn't get permanently discharged. The connection that you've made by directly connecting the BL5c directly to the battery input is degrading the life of your components as they are getting over voltage and will give up soon and also if you try to put cells in the radio the cells will get leaked because they will reciever reverse current from the lipo battery so modify it by connecting a 3.3v buck and boost converter to battery output of the charging board and connect a diode in between the battery connector positive and input on the pcb and also connect the 3.3v buck and boost converter output to the pcb input directly and not on the external battery terminal

you can directly connect it to the battery terminal of D219 ..it works perfectly as the BL5C and TP4056 BMS provide 3.7v output .. SI4825 IC runs from 2 v to 3.6V ...0.1v does nothing. (It will drop while travelling through resistors of the internal circuit ) 😊 (You can check the voltage with a multimeter ) but you have to charge the battery in the switch off position. If you still have doubts then you can connect a 7803 (3v) voltage. regulator. (Plz do it at your own risk. I am not responsible for any loss or damage )

If you turn on your radio by mistake someday while it is on charge it will blow up because the tp4056 will throw 4.12 - 4.2 volts @ 1amp straight into your radio curcit and the radio curcit is designed for 3.6v +-1% @ 350ma max hence it will blow up! Phew Anyway I'm not even going to open it up cause I use AA 900mah rechargeable batteries and they last for a month, I do a lot of electronics stuff but I do like to keep things simple and prefer equipment safely before modifying electronics gadgets.

but you can add resistance or a 3v voltage regulator i.e 7803...or the input DC port of d219 supports 5V as it has an inbuilt voltage regulator .The SI4825 chip runs from 2v to 3.6v . BL 5c battery and TP 4056 BMS module provides 3.7v. 0.1 v does nothing .. 😊

It probably does have a voltage regulator, I run mine with a removable 14500 AA size lithium battery, with a AA size Battery shaped paper roll with a copper wire in the middle to short one end to the other, and put the battery and the dummy battery together in the chamber and close the lid. It works absolutely fine...

Yes...and Raat ko Short wave pe bhi aata hai..

Thanks for watching ...Plz subscribe for more videos ..😊

Thanks for watching ..plz subscribe for more videos..

Thank you..

আচৰিত ন? 😊

Yes..you can ...with the help of 5v adapter (round pin )

Or you can make it rechargable ... Just check it out... ua-cam.com/video/bAP1cckdENo/v-deo.htmlsi=f8LWxP0BxgC5x9hJ

actually it is a car player ,it was used in commercial vehicles in india ..such as Bus, Truck etc .. and It's a stereo .. It has two 6283Ic in a bridge mode with 2 channel outputs .we called it as "Golden Deck" in india . As it uses Golden Mechanism (a special type of mechanism that was used in old cassette copiers with less wow and flatter ) Thanks for watching ...plz Subscribe for more videos ..