Відео

Hey there, buddy! I was really pumped up about it, but to be honest, it left me feeling a bit let down. I'm really rooting for them to step up their game with those paints.

Thank brother!

awesome bro!

bro I bought this with one of my friends way back. I'm not sure if bandai is still producing this one.

yes bro pewee baste follow the process lang and also make sure di mag halal ang paints mo. lacquer to acyclic is ok but acrylic to lacquer big no no yan

hey bro! well usually nangyayari yan sa metallicS. what I usually do is naka up side down ang pag lagay ko shelvings.

hey bro! good point, haven't tried Zurc pa but I will try that one in the future content. so far ok naman si ARKOM. 2 layers application ko and overnight curing.

I personally have tried both. I started with zurc primers, mainly the gray one and I had zero problems with it nman. The White on the other hand is really bad. The consistency is very powdery and it clogs up in my airbrush. Pero baka minalas lang ako sa batch na nakuha ko (hopefully) since the gray works perfectly well. For Armored Komodo primers, Gloss Black and White, no problems at all. I never encountered the scratching of paint you mentioned. In fact I’m about to purchase another set of primers from them today.

There are a lot of Zurc paints here in the Philippines, but yeah agree, it is a good paint.

thanks for dropping by! I put my psi usually around 20, distance is something you can estimate by the flow of the airbrush but make sure is not too far or too close to the subject. Always start with a light coating and then follow up after a minute. Goodluck and enjoy the hobby.

ey bro! I usually used 20 psi, distance is not particular, just make sure it is not too close and not too far from the subject. good luck!

thank you so much bro!

5 minutes lang bro lalo na pag medyo mainit goods na! 👍

@@PoisonGunpla Owwwh salamat kala ko need pa fully cured bago mag next session

@@joenieroque8113 no need. na yug primer 24 hours kasi minsan mga un even surfaces need mo pa e sand

yes since its Lacquer base naman so pwede na 5 minutes

hi! wala po since I used my old airbrush. but you can check hobbyworkz at shopee

Thank you!

yes bro ARKOM lahat

Thanks 🔥🙏🏼🙏🏼

yah bro I am planning to repaint this kit actually. Thanks for dropping by.

Hi bro! Yeah, I wasn't able to shoot because I'm just borrowing a camera from my sister. but yes, everything was dismantled. It's better if you dismantle just to make sure no parts are going to be missed out.

Thank you bro!

thanks bro! sana makatulong.

I guess bro, but this one is rock solid.

hahaha awesome bro!

thanks, brother!

There is a Japanese surplus shop here in our place bro.

Thank u bro!

most of them yes but some part in leg area is not also in shoulder

@@PoisonGunpla I just bought a Supernova, and it didn't have the Igel Unit, so I'm planning to buy a separate Igel Unit. the only problem is that ithe IGEL UNIT doesn't have a brand.

@@karlluigi1987 im nt so sure bro, I review the kit they are almost the same.

bro gamit ko mayon lacquer thinner lang mabisa sya then cheaper

@@PoisonGunpla maraming salamat po

bro good day! yes naa kaau pangita a Gunpla Cebu Community

bro tama its dee- cals ang pag ka bigkas, salamat po sa pag puna, ano po ma suggets mo na turotials baka makatulog din sa atin. Salamat sa pag supporta sa munting cha nel natin🙏

@@PoisonGunpla SLR, lods, nabusy. Mga tutorials sa pag-paint na mas detailed na info at step by step, pati mga tips rin, tulad nub removals at buffing, etc, pwede rin mga comparison ng mga available local paints gaya nung isa mong video, laking tulong samin, pati rin yung airbrush tutorial mo. Maraming salamat, lods, sana bumalik ka na sa pag-upload, mukhang 5 months ago pa last mo dito, no pressure lang, kung kailan mo feel.

No need na po basta wag lan po direct sa sunlight or ilaw

Bro thanks for dropping by, I hope this simple tutorial is very helpful to you and to your future builds🙏🏼

hi bro! so far eto ginagamit na method and most of the artist basta clear color kits medyo ma trabaho talaga, but once masanay ka na very satisfying naman ang result.

hey, bro thanks for dropping. y, well to be honest I don't know the brand, I just saw this one at my father-in-law's house and decided to repaint it.

hey man, does your frigate shoot rockets? I remember mine has... uhm it is located under the radars.

@@baduder1653 yes it shoots but it's damaged bro, I mean, lots of parts are really worn out.

yes bro, try not to cut closer because it will take a lot of process unless you paint the kit. Thanks for dropping by.

@@PoisonGunpla i mean i did have a plan to paint one of the 7 backlogs LOL. thank god i put off building 00 quanta clear body for a while

@@hoshi314 awesome bro! happy building

I bought it here in our local shop. its not Bandai its way cheaper

yes thank you so much! I was able to fix it already

You can still find this one but it's a bit pricey.

@@PoisonGunpla found one for about $160 USD with shipping included. How much did you pay if you don’t mind me asking!

@@TheForrestfire I got this around 65 USD here in our local shop

no bro just enjoy the hobby, build that one and share it with us.

The TT Hongli actually have a Metal Part that the other Heavy Arms Kit doesn't have, so that's also a good thing.

bro thank your for dropping bu sa atong ginagmayng video, hope maka tabang rani nimo puhon.

THAnk you Ning🙏

Thanks bro 👊

Yeah, bro what I like also in BANDAI, especially in this review, it can hold the weapons with no stress at all.

Thanks for dropping by brother, yes I'm looking also a WSD for this, Hope u can share with me as well.