Відео

I'm glad you could make some use out of it!

3 more days!

That's a good tip!

Yes, governor still in there. Next video will be modifications!

@@BlakesBuilds what's the top speed man? i have a 212 thinking about a torque converter to increase speed

@@adamrichardson135 torque converter should put you around 45mph if you take the throttle limiter screw out. Might be >45 with the mods I'm putting on it

@adamrichardson135 the only thing is if you don't raise the mounting plate, might have to cut part of your engine metal plating to fit the converter

@@BlakesBuilds alright mane , and what's the top speed with the torque converter?? is it better than stock?

Much appreciated! Hope you found this video helpful

The kit comes with a washer and a spacer. The pulleys are supposed to be partially off from each other so that when the driver pulley expands, the belt becomes straight with the driven pulley at higher speeds.

@@BlakesBuilds You can do it however you want but the belt should be aligned with the fixed (doesn't move) side of the drive and driven pullies. The belt position against those pully sides does not change at any speed. The belt is just moved higher or lower in the pully by the movable side.

I hope you got what you needed!

I'm very happy you were able to use my video to get the go kart running again! Your 12 year old and her sister are pretty wild to be rolling go karts 😂

Thank you!

Throttle limiter screw was in it and the stock jackshaft setup gave me that speed. The ct200u I'm doing now goes over 50mph, but has a torque converter and will have modifications

Is your gearing changed at all?

@jeron9272 not on this minibike, stock gearing

I believe it's a #35 chain (look on the chain to see what number is on it). If it's 35, get a 12 tooth 3/4" centrifugal clutch off Amazon. If it's a 40 or 420 chain, get a 10 tooth.

I've never been told I'm dialed in, I appreciate that!

@@BlakesBuilds i've built so many things in my life and done so many unique things in different parts of the world...but i can't fix a coleman go kart for the life of me hahaha. thanks for the help and I hope to get mine running! putting in a new carb in a few days. wish i had your skills! all the best to you sir.

@TheRancherAndTheWife same to you, let me know when you get her running!

GREAT MUSIC! Young man knows what real work music sounds like, great job, kid!

Made you click?😭

True, might be a good strategy😂​@BlakesBuilds

If you can't buy it, you can probably make it!

@@BlakesBuilds pretty much

I added a stage 1 kit to mine!

@@cosmosgaming0921 you're going to love part two then!

212 ghost with torque converter

His jokes throughout the video is what makes it👌

I really stumbled there😭

That is definitely a good thing to be concerned about!

Sounds sweet! I'd love to see the project, send some pics to @blakes_builds on Instagram!

What about the minibike I posted? It's even louder😳

@@BlakesBuildsSeen minibikes and I think they're cool!

Suffering from success😭

@@BlakesBuilds i wish i felt that way

This thing rips

That's all I used them for!

If you cleaned the carburetor and it starts up but dies on its own, it's safe to say either the carb is still dirty or the gas tank has dirt in it, and it made the carb dirty again. Or you could have bad gas, check the gas you have in it for water or dirt. The likely thing is the carburetor is still dirty. Make sure you put everything together correctly and sprayed through all the holes with carb or brake cleaner, and reassemble. If it's still doing this, try replacing the carb, sometimes dirt just doesn't want to come out.

Carb needs replacing or tare down n re build

W comment

Check your throttle cable to make sure the inside wire is correct and that the outside part that doesn't move is secured right at the end. I can send a picture for reference. Also, sounds like carb is dirty. If you already cleaned it and same issue either you skipped part of the video and didn't remove emulsion tube etc or maybe there's dirty just really stuck in there. Try cleaning it and make sure gas is clean (no water or dirt in it). If you're sure you did those things, make sure you put everything together correctly. Still doesn't work? Buy a new carburetor for it, sometimes there's just dirt you can't get out of it- $15 Amazon.

Exactly! The most you will usually have to do on these is tires, new engine, and throttle cables. Getting a go kart for $100 will almost always make you double your money

I'm glad it helped!

Much appreciated! I'm going to be honest, that will be a very big feat. DM me on Instagram @blakes_builds and I will help you out, too much to text on here

Much appreciated!