- 1
- 53 997
kieran clark
Приєднався 22 сер 2017
PW80 Pitbike!! (One of a kind *most modified in Australia!?!)
PW80 mods
This is my custom built PW80 has been a project for the last couple of months. Started off as a stock as a rock flogged out 2000 model PW80 with a seized motor,
I understand this could be the most modified PW80 in Australia!
Mods list
Motor complete rebuild, has been bored out to 89cc (49.5mm piston) stock bore and piston size is 47mm
WISECO piston kit.
Barrel has been ported/polished and exhaust port timing has been raised.
Head has been milled down 1mm to raise compression.
New rod+ crank bearings.
Oil pump delete.
Airbox modified
Moose racing air filter
Boysen power reeds
Reed cage opened up for improved flow, less restrictions
Exhaust restrictions removed
Exhaust is a custom YZ80pipe modified to fit
And a cr125 FMF Shorty
I have taken 2 balls out of the clutch and modified the basket added extra springs.
I have reinforced and added gussets to the rear swingarm.
KX60 rear shock (best upgrade yet)
Disc brake front end, longer forks (out of a PY90) replaced the fork oil with 15w oil and added 1” preload spacers on the springs.
Steel cleated foot pegs
Custom wheel set, with powder coated hubs and rims, PIRELLI MX52 Tyres.
The suspension is raised about 7 inches from factory height, and is buttery smooth
Bike has been fully pulled apart everything has either been restored or replaced.
I’m sure I would have missed some things
I’m yet to finish it, it is still a work in progress the hardest part is going to get it jetted right. I have all the jets I need hopefully to try and get it tuned. The mods will never stop, this if for me to ride and chase my daughter around on her PW50 I have a Yz250f and it just doesn’t like chugging around after the kids, it over heats way to fast. It’s made to be ridden wide open!
Drop a comment, like and subscribe! There is plenty more mods and videos to come, stay tuned.
This is my custom built PW80 has been a project for the last couple of months. Started off as a stock as a rock flogged out 2000 model PW80 with a seized motor,
I understand this could be the most modified PW80 in Australia!
Mods list
Motor complete rebuild, has been bored out to 89cc (49.5mm piston) stock bore and piston size is 47mm
WISECO piston kit.
Barrel has been ported/polished and exhaust port timing has been raised.
Head has been milled down 1mm to raise compression.
New rod+ crank bearings.
Oil pump delete.
Airbox modified
Moose racing air filter
Boysen power reeds
Reed cage opened up for improved flow, less restrictions
Exhaust restrictions removed
Exhaust is a custom YZ80pipe modified to fit
And a cr125 FMF Shorty
I have taken 2 balls out of the clutch and modified the basket added extra springs.
I have reinforced and added gussets to the rear swingarm.
KX60 rear shock (best upgrade yet)
Disc brake front end, longer forks (out of a PY90) replaced the fork oil with 15w oil and added 1” preload spacers on the springs.
Steel cleated foot pegs
Custom wheel set, with powder coated hubs and rims, PIRELLI MX52 Tyres.
The suspension is raised about 7 inches from factory height, and is buttery smooth
Bike has been fully pulled apart everything has either been restored or replaced.
I’m sure I would have missed some things
I’m yet to finish it, it is still a work in progress the hardest part is going to get it jetted right. I have all the jets I need hopefully to try and get it tuned. The mods will never stop, this if for me to ride and chase my daughter around on her PW50 I have a Yz250f and it just doesn’t like chugging around after the kids, it over heats way to fast. It’s made to be ridden wide open!
Drop a comment, like and subscribe! There is plenty more mods and videos to come, stay tuned.
Переглядів: 54 007
What is your gear ratio?
My first bike ❤ always dreamed of beafing up the suspension and putting on a pipe 😂 3 up was never as fun as blasting the fields as a kid and the we bike lasted 10 years thats Yamaha build quality for you
What pipe is that?
Fmf most likely for a 65cc and not cheap you'd be talking near £1000 😂
spend $45 and get that bike some graphics
Ive fell in love with these pw80s ive just got one after yesrs of drooling over them and finally being old enough to afford one i has the opportunity and have got it oh boi am i chuffed when i road it
Where can I get an exhaust like that for my bike
i have a pw80 yz-zenger
Where did you get your fmf pipe from man?
Bro can I ask what size shock you used please
Bro le falta yo tengo una y esa si grita pero esa no siempre tiene un corte del motor vieras la mia
Wots the bag pipe off mate
Bro I have a bike just like yours sick bro sound
how do you the reed cage?
How is it so tall?? It has disc brakes in the front, has a triangle stand and does not sound like a normal pw80
Kx65 rear shock
What rear shock
Thats Not so Tuning.
Only thing that looks modified is the exhaust lol my 5 yr old rides a pw80 lol
Notice the lift and disk brake?
It’s not a PW 80 it’s a PW 65 now
Pw80 is chain drive pw50 with big bore kit of 65cc is on a shaft not chain this is a pw80 as it also has gears the pw50 dose not and there is no such thing as a pw65
@@phillipamason9409 well he was trying to imply that the bike was so heavily modded that it's what a PW 65 would look like or it's as powerful or strong as a yz65
Got a website where i can find the parts to make it higher?? Also got the yamaha pw80
Can I have one please
I want one
how did you get it raised so much?
I know I'm 6 months late but a kx60 shock will work great.just stack a couple washers either side
Did you get the top end big bore as a kit and where from
Look at my modified pw50 ua-cam.com/video/jJ6qrLd4Exc/v-deo.html
Look up highley modified pw 50 Meyer racing austrailia
whats the top speed?
Will the kx60 shock go in without mods?
Just stack a few washers on each side of the mounting points for a tighter fit
looks like a yzinger 85 bro
Sounds good bro nice bike
ride it????
what suspension/where did you get it?
kx60 fit
update i took the rear shock, triple tree and forks off an xr 100 and put it on my pw80.
Where are the forks from?
Carb?
U should make a video if you riding it
How much
Make a video of you riding it
Check my channel! I’ve managed to do my own. Looks very similar to yours thanks for the idea
Best bikes ever
I watched the video when the PW80 Had the Fast Lines this Little Kid Smoked the Shit out of em.
Mate got a way I can message you about some stuff??
Nice. I am building one too. Using a cnc alloy frame. Have you seen that one in NZ. It goes mad.
NLP nope? Haven’t seen the one in NZ? Would you happen to know a link of it? Would be interested to see it, cheers
@@kieranclark6479 ua-cam.com/video/j-p2bl-n_Nk/v-deo.html there are more videos on that channel too of it.