Відео

Bro my multimeter has capacitance and Hz and otherthing for 10 bucks😂 and its autorange

Sorry. Perhaps a silly question... Could i just wire up a 5v phone charger and avoid buying the plug in doohickey?

well, how did it do in the summer?

Lots of good information. Thanks for sharing!

All my years of living in the northeast, have i ever needed to leave the wipers in the up position.

Terrible review, waste of time, too much yack not enough yakka. Boring, uninformative. Didn't even show it working. Pathetic

Nicely Done! Thank You!

Really amazing and wonderful, looks like natural. Only if they made a purely pneumatic system and got rid of the complex electronic would this be useful and the futuristic thing. 🌹🌹

Where did you get the armrest kit?

Can you just throw a cover on the truck? When you finish your building you'll have covered parking. Problem solved.

Can you do lower case letters with this label maker?

Why not just a power boost or the ford lightning pro?

Worked! Saved me from having to buy a new battery. Excellent content. Thanks again

I have watched a few dozen videos on this printer, trying to learn the differences between the various label materials, and some of the other nuances of using it. FINALLY the UA-cam algorithm sent me to your video which is by far the most informative one on the whole interwebs! Kudos.

Approximately how long does it take to charge each cell? And what is the output amp load max on your charger/power supply? Great video thanks!

VERY HELPFUL!

Hey very informative video! Question….I am planning on using this to power my Hakko 936 soldering station outside on my car to repair injector wires. Am I risking ruining my Hakko unit?

Thanks for putting this together. Was able to salvage a few carts, no thanks to Brady!

Looks pretty solid. I have a brand new 73hp Kioti Rx, relatively similar type of soil to yours but a bit more clayish, plan on ripping it in the fall with full irrigation. Do you think a 5 bottom plow with 2 stabilizer wheels on the back is ok for my size tractor? I know 5 bottoms are usually used with 110hp but after watching your vid I'm a lot more convinced. If a 60 can do 4 then 73 should realistically be chugging along the same power to plow ratio pulling 5. Would love to know your thoughts on this. Thanks!

Well done and very informative…wish this popped up when doing my search, much sooner than it did. 👍👍

Good video, well thought out. I ended up with the Massey 1725M. I can lift/curl at the same time with mine. A big part of my decision was parts availability and dealer location/reputation. The forums are filled with guys disparaging their dealer. I, on the other hand, am very pleased with mine and they're only 20 minutes down the road. Yanmar, Kubota, RK, and Deere are all over an hour away. I haven't had any trouble with my mini Massey and am quite pleased with it.

Well done.

i keep getting this error although i tried 5 different tutorials Firmware Version: 0x0 = (unknown) WARNING: Communication failure, is the MFRC522 properly connected? Scan PICC to see UID, SAK, type, and data blocks...

I KEEP GETTING THIS ERROR I TRIED 5 TUTORIALS SO FAR 7 HOURS OF MY LIFE WASTED PLEASE HELP MEEEEEEEEEE I UNINSTALLED AND REINSTALLED ARDUINO, FIXED THE WIRING, AND TRIED EVERYTHING PLEASE HELPPPP Firmware Version: 0x0 = (unknown) WARNING: Communication failure, is the MFRC522 properly connected? Scan PICC to see UID, SAK, type, and data blocks...

Will this be able to handle 120v 60hz 11.8A ?

best video on the internet tbh

Leaving the wipers up is convenient but the loss of it isn’t the end of the world. You can have your wipers up or remote start but not both. The wiper spring isn’t designed for long term extension. They will stretch over time. There is a wiper park procedure in the manual that you’re not using and should be used if you’re leaving your wipers up. What you’re doing isn’t recommended. Read your manual. I’m sure the Maverick Hybrid handles like other FWD cars in the snow. Tires for both FWD and AWD make the difference. More so on the FWD as far as getting started and maintaining forward movement.

If this is cheap than my multimeter is homeless

Massey for me with his choices jd is a rich man throw away tractor have way too many problems motor wise and too expensive. Kubota is way too cheap and breakdown like crazy for people who use them for how they are made to be used a relative has a kioti and he loves it but doesn't work it like a tractor just once in awhile id prefer a case emax or new holland workmaster 25s

For some additional insight here... Everywhere power is generated, or transformed, you need to establish a ground reference. For example, you may have single phase 240Vac coming into your house from the power company. Where the voltage and current are transformed (the transformer on the utility pole for instance), a ground/neutral bond is established to create a reference that is common to both sides. Same thing in commercial control applications where you may take 3 phase 480V and grab one leg of it to a 480:120Vac xfmer. The low side of that transformer will have two wires that read 120Vac between the two. One of them will be bonded directly to ground on that secondary side in order to maintain a common reference to the same ground on the high (480v) side. The ground bonded leg will now be the secondary's ground (green wire) and neutral (white wire). After that point, the two will never join each other again, and if another xformer was added down stream to say, drop 120Vac down to 24Vac, the process would continue. The ground wire to ground, hot and neutral to high side of transformer, then on the low side, two wires will exit, with one wire being bonded to ground to maintain the common earth reference that began all the way back at the turbine that spun up to create the power in the first place. Long ramblings just to explain that if you measure without ground off the secondary side of an inverter that is internally bonded to the negative side of the battery supplying the power, you're not going to get completely accurate results. Thank you for catching this.

Hi am James from west Africa. I want your contact

What tractor model?

Did you consider using a Zip-Lock bag iwth the Oven Cleaner process?

I have been driving for about 60 years and have lived in places where it gets to MINUS 40 and a foot or more of snow in a single night. I have never even heard of leaving wipers up like you show here. Your method is guaranteed to burn out the wiper motor if you have an inch of ice on the arms with the blades up.

A most interesting adventure. 😎 Thank you.

My uncle bought a Ford Tractor in the 70's. He's RIP but the tractor is still going. Another thing to consider is that tractors will last longer than you.(insert disclaimer here) so get what you can get parts for down the road. Kubota engines made in Illinois. They have 2 factories in Georgia.

I'm confused why you have to be condescending against the chinese language and the country itself 😕 im from hong kong so i hate china but its not very nice to be racist

oh hell yes keep it up

Nice job. Can you share measurements?

Great breakdown. Thank you.

The important thing to know is electronic equipment can be damaged or destroyed or even explode if connected to that SHAPE of power wave. There is a story of an audio equipment repair technician friend of mine called to service an expensive studio mix board that was being modified by the studio owner. Tech asked studio owner; "Before you power it up, are you sure you know what you are doing?' Owner said "Yes". Tech: "Okay, its your board sir." Owner powers up his mix board then all 96 channels of his $million dollar SSL mix board blow up in sequence, one at a time, smoke rising over each channel one at a time. Next, tech was hired to fix it (after it stopped smoking). He made a lot of $ off that guy.

Do you think with a 12v Milwaukee battery Does it posible to use paint sprayer

🚜👷🏻‍♂️👨‍🌾⚠️🇨🇦Removed my snowblower yesterday and reinstalled the backhoe!

I wonder can those augers be rented? I need to install lots and lots of fence posts.

Cartridges are extremely over priced for heat shrink tubing $80 a cartridge?!?!?! That’s ridiculous!!!

Is there a way to edit data that are saved into database or to send wrong data?

please one video for cloning 125khz card also

The easiest way to keep snow out of the windshield wiper valley is use a windshield cover it covers the opening and keeps the valley clean no worries of it getting filled with snow and you do not need to raise the wipers I have not had any problem with snow here in Ontario Canada

Citristrip, my dude. It's less caustic, fast, and easy. Stripped the lacquer off my rusted typewriter in no time!

I WANT TO SEE MORE!