Відео

個種係高密度發泡膠板，係文具鋪 同 模型鋪都買到！

@@kcc.studio1869 謝謝 很喜歡你的影片

@@user-cm8zd8zj2m 多謝你支持🤣🤣！！

I'm back !

我係用咗 mr color gx 100呀，開油比例我自己大慨係1：2.5✌️

謝謝你呀🙈

有Feel

謝謝你！ 就係想做返鏡世界個Feel！

嘗試自己做吧😝

I also have search it on the internet, the red colour just have a little bit different ✌️.

@@kcc.studio1869 owh... Thank god, it's just the color.... I thought im gonna miss something like hand part or else Thanks for the answer tho

Thanks man！ I will keep going！

Thanks man❗❗❗❗

我通常會用1000號沙紙輕輕係零件表面打磨下先，之後再用洗潔精加水洗一洗。 洗完之後就會用噴上1000號底灰。 之後上色嘅油 開油比例大慨1：2.5。 最後上完色就噴Mr.color 個隻GX消光（開油大慨1：2.5 - 3），大慨噴兩層就做到平滑嘅效果！！ 希望幫到師兄你！！

@@kcc.studio1869 已經噴完，冇你咁靚，不過都要花好多時間

砌多幾隻你都可以做到㗎！加油！

Since if you use the gold for the base colour, the clear red will become more look like a metal red colour 💪🏻

Thanks man🔥 This Gundam take many time to finish it💪🏻💪🏻

依家通常出去街鋪買🤣 網店之前就有係Align toys 到買

那些是高密度發泡膠板，適合用在模型地台製作✌️

@@kcc.studio1869 好的，謝謝

Thanks man🔥🔥

是純黑色

@@kcc.studio1869 明白, 我想拎番10年前整GE 素組MG 突擊自由黎學, 今日拆番出黎睇原來上面隻色係黑得黎有小小藍, 但我明明記得應該全黑先係...我以為我記錯

其實我個隻HG本身都係深藍黑色，上黑色個感覺好似靚D😂

@@kcc.studio1869 我都覺, 真係唔認真睇都唔覺原來係好深GE 藍

我就會係素組個陣係零件的圓形筍位用剪鉗輕輕剪一刀（當然唔好剪太多會影響組裝）。 注意：依個方法唔好用在關節零件上會影響關節活動能力🙅🏻 最直接方法當然用埋開件器就最好💪🏻 希望幫到你啦💪🏻

@@kcc.studio1869 原來有開件器，貴嗎

有呀，大慨$100，可以上網seach 下點用先💪🏻

我是用了消光

知道，如果我係做黑金果隻Amazing mighty, 個黑甲您會建議都用同一種消光嗎？

@@octaviojose3442 如果係我的話，我都會用同一種消光

@@kcc.studio1869 多謝您建議💪🏻

@@octaviojose3442 加油加油💪🏻

Thanks💪🏻💪🏻❗❗

Thanks man 💪🏻💪🏻

Thansk you love it❗💪🏻💪🏻

Thanks Siu ❗💪🏻💪🏻💪🏻

要呀，點都要洗一次，如果唔係會溝埋咗上一隻顏色

@@kcc.studio1869 thxxxxx

I paint the Mr.color GX114 on it. It can make the part look very matte.

@@kcc.studio1869 thats brilliant.. thanks for the info

用咗銀黑，自己溝的。 比例大慨 7(黑)：3(銀)

好多人也在等待Bandai推出😂

i just use the #1000 grit sandpaper grinding those plated silver and gold before i paint it. Thanks you like my video man !💪

@@kcc.studio1869 Ah, I see. So some of the writings on the shoulder/neck gold piece was left unsanded, right?

@@brandoncain5864 i have also sand it, but just sand it little bit ✌️

這個因為是再販的，所以現在要在網上找找了。

依家出面炒起咗，我買個陣都食咗小小炒價🤦

多謝你！💪🏻💪🏻🔥🔥

Thanks man🔥🔥💪🏻💪🏻

買龍送騎士 第一次聽到這個說法🤣🤣

Maybe later, but thanks man🔥🔥💪🏻💪🏻

多謝你支持 ! !

我依家係用緊 Sparmax AC66HX Arism Compressor 氣泵 & Sparmax DH-103 噴槍🤓 仲有一支大陸噴槍用嚟噴灰😂

@@kcc.studio1869 唔該晒🙏🏽🙏🏽好好人呀你

唔會呀，我都係買RG突自個隻水貼同其他標示水貼

Thanks man🔥🔥🔥

貼紙貼完先噴消光，可以統一光澤👍🏻👍🏻

Since some parts artist builder also want to make the parts more details, so that they will also use the yellow tape on the parts and then Paint it. For example there have a White parts i already paint it, but i also make it more real and details, so in the moment, i will use the yellow tape on that parts and then i will paint some gray or the other colours on it to make it more details. Hope i can help your to know more about build the gundam or models ☺️

@@kcc.studio1869 😧 Ohhh that's the reason people used yellow tape on the parts and it would leave some details on it, okay understood. Thanks for share info yeah it's very helpful man, I'm planning start to build gundam just like those artist did, idk I'm super interested the way they make it and nice work man. 👍☺

💪🏻💪🏻💪🏻

Thanks man😂😂 就係想做到依個Feel比觀眾😎😎

Thanks 教練❗❗🔥🔥

Thanks man🔥🔥

I have also paint the gray primer frist. After that i paint the gold colour, then paint the clear yellow over it, i will be look like more gold.

@@kcc.studio1869 thanks for the reply! Keep up with the amazing videos even though I understand they can take forever to edit but I enjoy watching them. Do you by chance have an Instagram I can follow?

Thanks man🔥🔥 My Instagram account : kcc.studio

That weapon is kotobukiya weapon pack, you can search it form the internet.

@@kcc.studio1869 thank bro :3

Around 1(colour) : 2.5 - 3(thinner)

@@kcc.studio1869 u use the colour bottle to measure the thinner ratio ??

Yes, maybe you can also use the electronic scale to measure the thinner ratio😂