Відео

My tach on my 96 is jerky but mostly doesn’t work. Is that just a bad connection somewhere?

How to take that steering wheel column off?

Mine had the speedometer problem. Ended up being a bad capacitor on the speedometer circuit board.

Thanks so much for this video. It’s the first one that makes this job look doable. Did your friend say anything about how it drives? I’ve read that people get some vibration with the aftermarket Rogue CV’s, so I’ve been wondering.

So where's the bad conector?

Thank you so much man! Your a life saver did this job in a half hour mechanic's wanted to charge me almost 600.00 I said ill do it myself after watching your video I felt confident! Thank you!

THANK YOU..very helpful

What brand did you use?

Jesus, do you actually know anything that you're testing for, when you use your multi-meter? How about taking a spare speedo sensor (or the one off your transmission), pull the speedometer out of the instrument panel and hookup 12 VDC, GND and the sensor to the speedometer? There's a guy on UA-cam who did that with the speedometer out of his 1990 Dodge Cummins. I had way less test equipment than him, and used a drill to turn the speedo sensor. Virtually every electro-mechanical speedometer system works the same way.

Thanks buddy for the video

If I took the bearing hub assembly out would the axel shaft come with it?

To much talking less accion

How can I get newer round cluster to work if I have swap dash from old square type

did u need a wheel alignment after the replacing the axles?

no corrosion on that bearing. do u live in a no snow zone?

You ever seen a nissan cluster with 2 digitial boxes like the clock one on yours and on each side of cluster mines a 97 d21

I just want you to know that THIS video was the one that, for me, made it possible to get my Miata up and running again. I'm bringing back a 1992 that hasn't run in just about a decade, and it was your snippet about the MAF that caught my attention. I checked that, found that it wasn't opening properly, and that fixed my problem. Thank you very much for an excellent video!

Dude, quit babbling, get to the point, this should have been 5min.

If my cluster was taken out for an issue. Is there a way in the computer system I can tell the actual miles on the truck? I think it was drive like that for a while. Thank you.

I have done the same swap and could never figure out the VSS. Did you splice the cluster into the original harness? How does the ECU throw a code if it was cable driven speedo? Thanks!

Well explained

my 1991 pathfinder speedometer says i am doing 50 mph when i am barely moving.

Need a little help if enyone can help me please i have a nissan hardbody d21 1993 and the temperature gauge not working i replace the cooling temperature sensor is only 1 cable but the needle dont go up truck runs good and i like to fix tha little issue meybe someone can help me please thank you good bless you all

"Had a multimeter in the truck already" tell me you own a hardbody without telling me you own a hardbody

What poweres the trip o meters my 97 has one digital on each side of bezel I’ve changed all fuses and rest of bezels 100%

I'm doing the swap as well but can't find nothing on the wiring diagram to get the cluster working can you help

Do you know if the temp gauge has the same kind of pot behind the gauge face as the tach and if it can be adjusted? I'm having an issue where my temp needle only sits at about 1/5 when fully warmed. I've done a bunch of tests on the temp sending unit and stat, but still cant figure out why my needle is so low... The gauge itself is kind of my last area I havent explored. Any info or advice would be greatly appreciated. Thanks!

I have a 1998 frontier with a bad speedo . i wonder if i can adapt a pathfinder speedo?

I like your grand cherokee i have a 93 nice lift how many inches of lift and tire size please

Update?

very good video and thats how it is taught

ever do anything for the leak?

What connector was the problem?

How hard is the dash swap I have a 1990 square dash didn't know if it was more work than it is

I been having issues with mine so what I did I changed it and it is 5 miles behind so if I'm going 65 in the gage it reads 60 and unfortunately on the one I have it doesn't have the screw to adjust the speed and so far I bought 3 different clusters and they all read the same and none of them have the screw I do understand the gear ratio changes but they were the same trucks and same motor and all were with manual transmission like mine so any tips are highly appreciated thank u for ur time

Did you ever fix this issue? I’ve been thinking about doing a dash swap on a 93 hardbody but also want to use the newer cluster!

What kind of oil? I don't see!

Thanks for sharing! Got the same rig and yup gotta replace the axles

Thanks for your helpful video. I have a 1994 Nissan d21 king cab hardbody with the 3.0 v-6 4 wheel drive. I recently noticed that my trip meter and odometer quit spinning so my mileage is stuck which can really turn someone off from purchasing a vehicle knowing that the mileage isn't correct. My speedometer and tac work fine, it's just the odometer. I took out everything today and the gears that turn are perfect and no play or anything broke or stripped. When I first start my truck up and drive it, the odometer turns and after a few minutes, mainly when driving uphill, the check engine light comes on and that's when the odometer quits turning. After about 2 -3 miles the check engine light goes out and the odometer starts to turn. I'm wondering if it's an electrical issue or the speed sensor that's mounted to the transmission.

Nice work on the video. Thanks for the info.

Very nice. So the newer dash fits the older ones?

You didn’t blur out her face...just sayin’