Thanks SOO much .. we just put in a bid on a home and the pump was not working.. we were serious worried. But thanks to your video. The repairs will be minimal ! Yeah team home owner .. ps it was full of fire ants. Lol. Joe
Jeff I replace the kit And it still does not work. The compressor does not come on do you have a video that shows me how to replace the compressor or will I have to buy a new one? If you have any other suggestions please let me know. Thank you for your help
Sometimes when that rubber wears out the motor gets a little crooked and it won't run I did have to tap mine in order to get it to start running while the breaker was on
I got my kit and it comes with SP switch pin. I don't see where to put it when I open lid but it had fallen down to bottom . Didn't see where it come from. It came with directions how to put on. I noticed you didn't show how to install pin. Can you help me.
My kit did not have any kind of a pen or anything it just came with the rubber for the pump and the covers, I would just change those and see how it works
Jeff, Your case was full of anti freeze. How would you drain and replace? Is there a bottom drain plug or ? What type and roughly how much oil does it require? I am running down a no spark issue on mine. Might go further. In to case. Any pointers? Thanks
Magnetic Sweeping of America, LLC , I point out in the beginning of the video where the drain is, this problem won't cause the no spark, check the power and ground to the coil.
I think there was a drain and a feel plug, just have to check the book on oil type and amount, I think there are fuses where the stator wires plugged in, I would check those
Very helpful, clear/concise and to the point! It kills me these guys who, although with good intent, drag on a simple "how to"...to...a version of "War and Peace" :)
I'm about to do this on my sportsman 400l it's got milky oil in the counter weight and somebody snapped a bolt off of the water pump cover and the weep hole is leaking coolant too
I'm about to do this on my sportsman 400l it's got milky oil in the counter weight and somebody snapped a bolt off of the water pump cover and the weep hole is leaking coolant too
did you adjust it, turn the air/fuel screw all the way in, then turn it out 2 and 1/4 turns, that's a good starting point, start it and turn one way or the other until is sound good
Getting to much air or somthing maybe idk. The snorkle part uo front is open and if put a pipe to extend it out so water don't get in it. Would that affect it making it have to much air amd if so what would I need to do?
Oh I can hardly wait for when I go at Christmas now. My biggest question was are there sea turtles. Where those in front of your resort? By the pier?
They were over more towards the palace but yes they come up and see you about every 5 to 10 minutes.
Why the over-dramatic music? Absolute turn off.
Okay 😂
😂😂
Great video!
Thank you!
My compressor is by my bedroom window. How do you suppress the noise? The humming is loud. Thank you.
If you cover it, make sure you leave at least one side open so it can suck in clean air.
Thanks you so much 🫡
Thanks SOO much .. we just put in a bid on a home and the pump was not working.. we were serious worried. But thanks to your video. The repairs will be minimal ! Yeah team home owner .. ps it was full of fire ants. Lol. Joe
Jeff I replace the kit And it still does not work. The compressor does not come on do you have a video that shows me how to replace the compressor or will I have to buy a new one? If you have any other suggestions please let me know. Thank you for your help
Sometimes when that rubber wears out the motor gets a little crooked and it won't run I did have to tap mine in order to get it to start running while the breaker was on
I got my kit and it comes with SP switch pin. I don't see where to put it when I open lid but it had fallen down to bottom . Didn't see where it come from. It came with directions how to put on. I noticed you didn't show how to install pin. Can you help me.
My kit did not have any kind of a pen or anything it just came with the rubber for the pump and the covers, I would just change those and see how it works
Yea all these rebuild videos don't mention much on the safety switch, why it breaks, how to go from the screw to the switch conversion ???
Will the kit have both sides in box?
My unit was not running at all put my sprinklers would come on when I when I push the switch. By buying the kit will that fix the problem?
Yes, it is a kit to rebuild the whole pump.
Mine was doing the same thing and it fixed the problem.
Thank you I order one and it will be in about the 6th or 10th of June .
Do you have a link to the rebuild kit? Looks like you have the same pump as my setup.
No, just bought it on Amazon, type in the name on your pump and rebuild kit.
6s980 vur.fyi
What pipe is that
I'm pretty sure it's the stock pipe that come on the bike not sure the brand but I no longer have the bike.
Looks like a plated DG pipe to me definitely not stock as I have a 100% stock 87
You're probably right I had two bikes and built one good one and I did use the better pipe.
Any one no gear noises inside engine loud but loose sound runs great Polaris 350 2x4 like a 93 ???
Not sure.
Thank y ou, needed verification the spider nut is left hand thread..
Jeff, Your case was full of anti freeze. How would you drain and replace? Is there a bottom drain plug or ? What type and roughly how much oil does it require? I am running down a no spark issue on mine. Might go further. In to case. Any pointers? Thanks
Magnetic Sweeping of America, LLC , I point out in the beginning of the video where the drain is, this problem won't cause the no spark, check the power and ground to the coil.
Jeff Looney thanks jeff. Appreciate your time. Is drain and fill plug one and the same? Type and amount you used? No power to coil. Fyi.
I think there was a drain and a feel plug, just have to check the book on oil type and amount, I think there are fuses where the stator wires plugged in, I would check those
Very helpful, clear/concise and to the point! It kills me these guys who, although with good intent, drag on a simple "how to"...to...a version of "War and Peace" :)
I bought most of the parts on ebay.
Jeff Looney how’d she hold up with eBay parts I got this same bike and I’m a little sketched with buying eBay parts
where did you find parts to rebuild the engine at.
I'm about to do this on my sportsman 400l it's got milky oil in the counter weight and somebody snapped a bolt off of the water pump cover and the weep hole is leaking coolant too
I'm about to do this on my sportsman 400l it's got milky oil in the counter weight and somebody snapped a bolt off of the water pump cover and the weep hole is leaking coolant too
air impact gun
I'm currently on the middle of this!! How did you get the left threaded nut off? I can't get it as the shaft spins freely with it!. Help!
l'm not sure.
Jeff, that is the same carb as a 1995 Kawasaki Lakota, correct?
is the boot good between the carb and the engine, make sure you don't have an air leak
you don't have an air leak between the carb and engine do you
took fuel mix screw out and starts better gets way to much air.
Silent night
did you adjust it, turn the air/fuel screw all the way in, then turn it out 2 and 1/4 turns, that's a good starting point, start it and turn one way or the other until is sound good
it was a brand new carb.
did you rebuild the 300 ex carb before you put it on, most of the time people don't sell carbs that are completely clean
it worked great on mine
this don't work. I bought a new 300ex carb takes forever to start then once it starts has a hard time idling then once you hit the gas it dies out.
I rebuilt the carb first
Getting to much air or somthing maybe idk. The snorkle part uo front is open and if put a pipe to extend it out so water don't get in it. Would that affect it making it have to much air amd if so what would I need to do?
Could us ur help if u don't mind.
used the same filter, just turned the breather tube around, it fit over the bigger carb perfect
That's the front brake.
Automatic clutch
Sorry about the rattling camera, it was mounted on my handle bars
How hard was that nut to get off? I've read that a lot of people have had big issue getting it off.
I used an air impact gun, worked good
Awesome thanks. My water pump seal is out on my 400 xplorer . This def helped.
you're welcome
Not really sure if it's the same, you'll have to look it up
is that same procedure for trailboss 1993 ?
That fixed it, it runs great again with no leaks!
I know I'm real slow!
You sound like Hank Hill. Propane and propane accessories.
No, sorry just sold it Tuesday.
Is this still for sale?
Its for sale! $1400
check out my trike videos too! nice 250r btw