WyldWeezle
WyldWeezle
  • 75
  • 103 394
Incredicoaster
Riding the Incredicoaster at Disney California Adventure, December 2021
Переглядів: 443

Відео

Biltmore outside 2019
Переглядів 105 років тому
Biltmore outside 2019
Biltmore Conservatory trains 2
Переглядів 85 років тому
Biltmore Conservatory trains 2
Biltmore Conservatory trains
Переглядів 155 років тому
Biltmore Conservatory trains
NASCAR Hall of Fame August 2019
Переглядів 155 років тому
NASCAR Hall of Fame August 2019
NASCAR Hall of Fame 2019
Переглядів 175 років тому
NASCAR Hall of Fame 2019
Radiator Springs Racers
Переглядів 6 тис.5 років тому
Radiator Springs Racers
For Mom
Переглядів 145 років тому
Small World
GE Washing Machine overfill, won't fill, clean the air dome
Переглядів 48 тис.6 років тому
How I cleaned the air dome on a GE washing machine that was over-filling.
Kitty NASCAR fan
Переглядів 157 років тому
Our cat appears to be a JJ fan.
MAH02088
Переглядів 5048 років тому
*July 28* So it's official. Last night's light show was the second stage of a Chinese Long March 7 rocket launched about a month ago, confirmed by the Joint Space Operations Center. According to Jonathan McDowell of the Harvard-Smithsonian Center for Astrophysics these things happen all the time we just don't normally see them, as usually the objects are small and they fall back to earth over r...
First Thunderbird Sighting of the Season
Переглядів 2,3 тис.8 років тому
Thunderbird over Nellis AFB
Mesquite Flat Sand Dunes
Переглядів 199 років тому
The sand hissing as it blows over the dunes
Dancernauts
Переглядів 1639 років тому
Vegas race
Dante's View
Переглядів 2179 років тому
Dante's View and it's relevance to Star Wars as explained by Tim
Racing Stones in the water. Racetrack Playa.
Переглядів 9009 років тому
Racing Stones in the water. Racetrack Playa.
Racetrack Playa submerged
Переглядів 779 років тому
Racetrack Playa submerged
Heading to Racetrack Playa on a rainy morning
Переглядів 309 років тому
Heading to Racetrack Playa on a rainy morning
On the Road to Lost Burro
Переглядів 979 років тому
On the Road to Lost Burro
Racetrack Playa Road. Smooth ride
Переглядів 1369 років тому
Racetrack Playa Road. Smooth ride
Rhyolite jail
Переглядів 459 років тому
Rhyolite jail
The view from Lost Burro
Переглядів 319 років тому
The view from Lost Burro
Red Pass above Leadfield
Переглядів 489 років тому
Red Pass above Leadfield
Hail in Rhyolite
Переглядів 69 років тому
Hail in Rhyolite
Toward Titus Canyon, Death Valley
Переглядів 39 років тому
Toward Titus Canyon, Death Valley
Hidden Valley, road to Lost Burro Mine
Переглядів 739 років тому
Hidden Valley, road to Lost Burro Mine
Teakettle Junction
Переглядів 329 років тому
Teakettle Junction
Racetrack Playa
Переглядів 9110 років тому
Racetrack Playa
Mos Eisley (Coming back to Las Vegas)
Переглядів 7112 років тому
Mos Eisley (Coming back to Las Vegas)
Buck doing covers
Переглядів 512 років тому
Buck doing covers

КОМЕНТАРІ

  • @fsimonpietri
    @fsimonpietri Місяць тому

    Excellent explanation and video. Will test mine tomorrow. It is not filling in some positions, works perfect when select HEAVY

    • @WyldWeezle
      @WyldWeezle 11 днів тому

      @@fsimonpietri Just spotted this. Did it work? If not, did you ultimately solve the problem?

    • @fsimonpietri
      @fsimonpietri 11 днів тому

      Yes. I used my air compressor to blow the diaphragm and voila, it is working perfect. Some dirt must have been obstructing the air sensing mechanism. Thanks!!!

  • @Wehooping247
    @Wehooping247 2 місяці тому

    Use compressed air from a can the stretched straw attachment fits in perfectly

  • @variousJnames
    @variousJnames 3 місяці тому

    Looks like he went into a house, not further up the street. He obviously was there to meet someone and I fear foul play because they were waiting for him😢

  • @oreon7907
    @oreon7907 4 місяці тому

    Thanks a lot, in my case the hose had a little hole, but understanding how it works helped me to find the solution!

    • @WyldWeezle
      @WyldWeezle 4 місяці тому

      @@oreon7907 A working washing machine is a working washing machine! Victory!

  • @joecorrie1
    @joecorrie1 5 місяців тому

    I’m in the same boat? When I blow into the tube at the switch side I can hear air so I’m thinking it’s clear but I still have the same issue it won’t shut off the water? I’m going to try compressed air and see if that makes a difference, I’m thinking the switch lost its sensitivity to operate, but does work when I blow in the tube?

    • @joecorrie1
      @joecorrie1 5 місяців тому

      Ok took shop air and blew it into the plastic tank attached to the tub and now it’s working. It’s shutting off at all three levels now?

    • @WyldWeezle
      @WyldWeezle 4 місяці тому

      Yikes. That sounds like you may need an actual pro.

    • @WyldWeezle
      @WyldWeezle 4 місяці тому

      Or I misunderstood...... did it work?

  • @chrisgaus5650
    @chrisgaus5650 5 місяців тому

    Thanks so much for this! Just like you said I was getting close to wits end and this cleared it right up!

    • @WyldWeezle
      @WyldWeezle 5 місяців тому

      MOST EXCELLENT! Glad it worked!

  • @WyldWeezle
    @WyldWeezle 7 місяців тому

    At the recommendation of a viewer I'm adding a donate link. I posted this video to help folks who might have the same problem and this video will be here as long as I have a channel. But... if you feel like this tutorial is worth a few bucks, I am NOT going to say no! If I've done this correctly you can donate using this link: paypal.me/overfillrg Thanks!

    • @amywest4054
      @amywest4054 6 місяців тому

      Sent you over a small donation! This fixed my system after 2 visits from appliance repair, a flooded laundry room, and a suggestion to replace the washer! This is the first issue I've had in 11 years and glad I didn't have to give up on a solid machine!

    • @WyldWeezle
      @WyldWeezle 6 місяців тому

      Thank you! I'm so glad you got it sorted!

  • @HippieLongHaired
    @HippieLongHaired 8 місяців тому

    Thanks for your help.

  • @esantos797
    @esantos797 8 місяців тому

    OMG. My tube was cleared, the switch is fine. I couldn't think of anything else. I actually heard a PoP when I applied the compressed air. Works perfectly now. Where's the "Donate" link on here?

    • @WyldWeezle
      @WyldWeezle 8 місяців тому

      Excellent! I'm glad you got it fixed. I had never thought of a Donate button. I'll have to see if I can figure out how to do that.

  • @mesutsentepe5685
    @mesutsentepe5685 8 місяців тому

    You are the best 🙂

  • @jordanedwards7800
    @jordanedwards7800 10 місяців тому

    I by pass the lid switch switch because my machine switch was defective I realized i5s start leaking underneath the was tub,base on my research that it needed back the lid switch I bought it online receive it already waiting to go in. Town where machine is so I can install it and see if it stop leaking when washing

  • @satishbachim8721
    @satishbachim8721 10 місяців тому

    Very crucial true important vedio

  • @Whatwhat1235
    @Whatwhat1235 10 місяців тому

    People don’t just go missing

  • @skiphammack796
    @skiphammack796 Рік тому

    Thank you. Compressed air forced through the air dome or whatever is is called worked. Terrible design not to be able to do maintenance on it. Thanks again, saved me an expensive service call

  • @robertmencl9169
    @robertmencl9169 Рік тому

    Good communicator.

  • @CyleJoshuaReyes
    @CyleJoshuaReyes Рік тому

    37. I came from Wikipedia and read the article and came to this footage. Just a realization that a white suv from 0:31... is it the same as the one in 0:54 ? That may be far fetched. These cases of men disappeared (I also read those in Wikipedia articles) are fascinating to read because we have no idea if they're still alive or where they are now. What I know is that they're still on Earth

  • @NevermindtheRedundants
    @NevermindtheRedundants Рік тому

    Was Neal Falls ever a suspect? Maybe they crossed paths, and told him he could get him some work at the dam, had him park there, and picked him up. Neal lived about 20mins from his disappearance area.

  • @tonij9089
    @tonij9089 Рік тому

    Ty!

  • @joshgiberson3251
    @joshgiberson3251 Рік тому

    Thank you soo much. You saved me hundreds of dollars!

    • @WyldWeezle
      @WyldWeezle Рік тому

      EXCELLENT! So happy it helped!

  • @shani13bug
    @shani13bug Рік тому

    This worked for me!! Tried the switch already and nope. Tried this as a second option so I didn't have to waste more money on parts I didn't need!

  • @freddycastillo1312
    @freddycastillo1312 Рік тому

    Thank you sir

    • @WyldWeezle
      @WyldWeezle Рік тому

      You are so welcome! Happy to be useful!

  • @walterlewis1029
    @walterlewis1029 Рік тому

    Hi WyldWeezle.What I want to know is where is the gunk going because even if I use the compressed air and the air dome is cleaned out I'm concerned that the gunk will just settle back into the airdome after awhile.Should the tub have water in it before I use the compressed air.

    • @WyldWeezle
      @WyldWeezle Рік тому

      It blows out into the washer and then goes down the drain. I ran a cycle after I did this just to make sure it was draining properly. I haven't had this particular problem again since posting this video. I presume it is gradually filling up again, but so far so good.

  • @ryanestess6919
    @ryanestess6919 Рік тому

    Thanks man! Had the exact same problem. The first time this happened I called a repair man and this was the issue. So now any time I have a filling problem this is the first thing I check.

  • @Zephal42
    @Zephal42 Рік тому

    It appears he's not actually carrying anything and instead has his hands in his pockets/jacket pockets.

  • @CBJFanatic
    @CBJFanatic Рік тому

    I used this procedure to fix my washer that wouldn't progress past the wash cycle. The tub would drain, the pump would continue to run, and then eventually the washer would fault out and stop the cycle. The rinse cycle would not start. I used an air compressor with a needle that is used to inflate balls to get blow out the gunk (lots of pet hair). Also, make sure to remove about an inch from the hose that connects to the air dome to ensure a tight seal.

    • @WyldWeezle
      @WyldWeezle Рік тому

      Excellent! Good advice re: the hose.

  • @gatorr4life
    @gatorr4life 2 роки тому

    I know this is an old video but if anyone can help it would be great. I have the exact same machine. My problem is it won’t fill up to the proper amount. I, too, blew into the hose and it stopped filling. So its not the pressure switch. Then I did what you did. I sprayed compressed air into the air dome. I think it pushed a little of it out but not enough. I can still see blue-ish lint, and a black color like yours. The water now seems to be getting a little higher, but it won’t finish the entire cycle overall. It gets to the ‘wash’ phase and just freezes. Maybe the control board? Or maybe I’m not giving it enough time. It’s not my washer, fixing it for a family member. Not sure how long each process takes. Anyway, has anyone had my problem? Washer not filling up to the desired setting? Did this trick with the airdome work? If so, what did you use to clean it out? As a last resort, I’m going to drill a small hole in the air dome and clean it that way. Then buy an expensive epoxy glue to seal it back up. TIA

    • @WyldWeezle
      @WyldWeezle 2 роки тому

      Anybody have this same issue? I remember seeing someone trying to get white vinegar inside the air dome to see if it would dissolve the stuff inside, or getting an unbent paper clip or something in there to swish it around. Anybody have an answer for @gatorr4life?

    • @gatorr4life
      @gatorr4life 2 роки тому

      @@WyldWeezle I found a website that had an actual repair man on it. He said put bleach in the air dome and let it dissolve everything. Then open up the top part of the machine and disconnect the tube attached to the pressure switch. Blow hard until it feels clear. He’s said that should be enough. Going to try it out tomorrow. I’ll report back what happens. Thx for the reply.

    • @WyldWeezle
      @WyldWeezle 2 роки тому

      @@gatorr4life Excellent!

    • @gatorr4life
      @gatorr4life 2 роки тому

      @@WyldWeezle I didn’t try to clean it again. I thought I’d give it a shot and see if a couple of loads would help break it up. I set the control nob to “auto detect load”, and it worked like a charm. I think I’m going to clean it once more before I leave it alone for another 5 years. Going to spray some bleach in the air dome instead of vinegar. I’ll let it settle in for awhile. Then, instead of using a can of compressed air at the tiny hole, I’m going to blow very hard form the top of the tube. See if that helps some. I haven’t tried different water level settings yet, only the auto detect load setting. Gotta love the internet… You can do just abt anything if you have the time and patience. Thx again. 🙏

    • @WyldWeezle
      @WyldWeezle 2 роки тому

      Awesome! Yeah, if not for the internet I wouldn't be able to fix anything in my house.

  • @ruebenvangleason2505
    @ruebenvangleason2505 2 роки тому

    The exact DIY video I was looking for thank you so much. Washer is cycling correctly now. Didn't have to call the repair guy or spend big bucks on something new. Thanks again

    • @WyldWeezle
      @WyldWeezle 2 роки тому

      Fantastic! Glad it helped!

  • @semomagicmirror3218
    @semomagicmirror3218 2 роки тому

    AWESOME!!!! THANK YOU!!!! For the life of me, I do not know why ALL of these over fill videos did not cover this! It was driving me NUTS! Thank you so much for your post...this was great!

  • @Mattargeetar
    @Mattargeetar 2 роки тому

    God sent

  • @joeltingram
    @joeltingram 2 роки тому

    Just wanted to say this solved a no spin issue for me. Air dome got full and wouldn’t drain so the drain pump just kept running until it just shut off without a spin cycle, leaving the clothes soaking wet still. A blast of air to clean like you suggested and it drained, did a vinegar hot water soak for good measure, making sure it got into the air dome. The only solution to my problem, thank you so much. Great tip on how to check the pressure switch too.

  • @vickbenice
    @vickbenice 2 роки тому

    Thank you so much!! I have no experience with washing machines and this video was simple, straight forward, and to the point. Thank you!

    • @WyldWeezle
      @WyldWeezle 2 роки тому

      Great! Hope it helped!

    • @vickbenice
      @vickbenice 2 роки тому

      Any chance you know where the lint trap is on an LG top loader?

    • @WyldWeezle
      @WyldWeezle 2 роки тому

      @@vickbenice I don't. My GE doesn't actually have one.

  • @fju2112
    @fju2112 2 роки тому

    fast forward a year later and now the machine is not draining enough water out so the clothes are still sopping wet after the cycle completes. There is some water floating in that pressure chamber so maybe I need to try the method in the video again, but wondering if this is a common issue with GE washers and if anyone has successfully been able to troubleshoot?

    • @WyldWeezle
      @WyldWeezle 2 роки тому

      Haven't had the issue again personally, but let us know what you find out.

    • @fju2112
      @fju2112 2 роки тому

      @@WyldWeezle apparently the lid lock switch may need to be replaced, going to try it.

  • @davidfrohwitter4120
    @davidfrohwitter4120 2 роки тому

    DUDE!! This is a life saver!!!! It worked perfectly! You just saved me the trip from an appliance repair man, or worse a new washer! Thank you so much for posting this!

    • @WyldWeezle
      @WyldWeezle 2 роки тому

      Excellent! Exactly why I shot this, cause I was thiiiiiiiis close to calling a repair service.

  • @btphelps
    @btphelps 2 роки тому

    If compressed air fails, get some muriatic acid from a spa, pool, or hardware store, and a dropper from a pharmacy. Fill the dropper and drip the acid into the inlet tube of the air dome. it should dissolve the collected solids that are blocking the air dome. I did this five or six times and now the washer works. WARNING! Muriatic acid is extremely caustic! Wear rubber gloves and eye protection! it is usually only available in gallon or larger jugs. I talked a spa store into giving me about a pint.

  • @mabelsanabria6390
    @mabelsanabria6390 2 роки тому

    Iii

  • @andrewtran8788
    @andrewtran8788 2 роки тому

    I did exactly this and it worked. Thank you. I would recommend changing the title of this video because it wasn’t easy to find.

    • @WyldWeezle
      @WyldWeezle 2 роки тому

      What keywords would be helpful? I can add them.

    • @WyldWeezle
      @WyldWeezle 2 роки тому

      Also... glad it worked!

    • @andrewtran8788
      @andrewtran8788 2 роки тому

      Add keywords like ge washer overflowing and ge washer wont spin.

    • @WyldWeezle
      @WyldWeezle 2 роки тому

      @@andrewtran8788 Got it. I will do that now. Hopefully that will make it easier for people to find. Thank you for letting me know!

  • @glatt1
    @glatt1 2 роки тому

    You are awesome. Thank you for making and posting this video. I'm going to try this tomorrow, and I'm confident it will fix my problem, I could see the gunk in this air dome as I was trying to figure out why my washer was overfilling. Blowing in the tube to test the switch is brilliant. Thank you!

    • @WyldWeezle
      @WyldWeezle 2 роки тому

      Let us know how it goes!

    • @glatt1
      @glatt1 2 роки тому

      @@WyldWeezle So it turned out my pressure switch was fine and the air tube was clear, despite being all full of funky stuff. So I'm almost certain the machine was set incorrectly from the factory, and we just never used the "Super" setting enough to realized it overflows when you do that. So I saw a set screw up in the pressure switch that I tuned a full turn counterclockwise, and it lowered the height of the water by about an inch. So it's fixed now, but by turning a set screw. And then I dumped 3 cups of bleach in the machine with the full tub of water and let it do a 30 minute long soaking cycle to clean up all the mold I never realized we had in the machine.

    • @WyldWeezle
      @WyldWeezle 2 роки тому

      @@glatt1 Glad you sorted it. More information for anybody who finds their way here and turns out a blocked air dome isn't the issue, thank you for posting it!

  • @J.D.Padilla
    @J.D.Padilla 2 роки тому

    My washer was not spinning and this step worked.

    • @amywest4054
      @amywest4054 6 місяців тому

      This comment made me try this fix as my washer's first symptom was not spinning out after washing and this fixed my washer!

  • @kevincrawford6243
    @kevincrawford6243 2 роки тому

    Thank you for sharing this information. In my case I was able to clean the gunk from the air dome by blowing (with my mouth) into the other end of the tube. When I first started blowing I could tell there was a blockage. After 3 seconds I heard a pop and the blockage was clear!

  • @z50com
    @z50com 2 роки тому

    My wife fixed our washer thanks to your video! You saved us hundreds Where do I send the $20 for the great advice?????

    • @WyldWeezle
      @WyldWeezle 2 роки тому

      Ha! Kind of you to offer, but I think she deserves the twenty bucks! Glad it worked!

  • @annjones5201
    @annjones5201 2 роки тому

    could it be the killers of susan powell killed him? To divert suspicion from themselves?

  • @RyanT301
    @RyanT301 2 роки тому

    Yo what’s up with that white suv following him

    • @onemomenttohislifespan
      @onemomenttohislifespan 2 роки тому

      Thats his car

    • @RyanT301
      @RyanT301 2 роки тому

      @@onemomenttohislifespan cause I’m a keyboard warrior

    • @RyanT301
      @RyanT301 2 роки тому

      @@onemomenttohislifespan lmao I’m just playin bra

    • @sniperfoxxx6543
      @sniperfoxxx6543 2 роки тому

      @@onemomenttohislifespan No it isnt.isn't.. He was driving the white cavalier... The SUV was a real estate agent according to other resources..

  • @harybila9137
    @harybila9137 2 роки тому

    Yeah,, screech horribly not the breath, but the fart blows fire,,

  • @wefilmfood4033
    @wefilmfood4033 2 роки тому

    Just cleaned the air dome and i taught my daughter what you taught me and we are washing right now worked great.

    • @WyldWeezle
      @WyldWeezle 2 роки тому

      EXCELLENT!!! Glad it helped!

  • @wefilmfood4033
    @wefilmfood4033 2 роки тому

    Excellent video

  • @LunafactionRIP
    @LunafactionRIP 2 роки тому

    Thanks, worked for me!!

  • @AndiNewtonian
    @AndiNewtonian 2 роки тому

    Very cool! I can tell you were having a ball!

  • @mattstringham5056
    @mattstringham5056 2 роки тому

    Excellent video!!!! My washer has been overfilling on a few occasions. I would clean out the tube but didn't know how to clean out the air dome. My spin wasn't working either. The compressed air did the trick. Again THANK YOU!

    • @WyldWeezle
      @WyldWeezle 2 роки тому

      Cool!!! Glad it worked!

  • @bertrdurant8837
    @bertrdurant8837 3 роки тому

    Where are you Steven Koecher?

  • @AJ-dr5jr
    @AJ-dr5jr 3 роки тому

    Had this issue. Googled some stuff and changed the hose. Still had the problem. Did some more googling and found this video. IT WORKED THANK YOU

    • @WyldWeezle
      @WyldWeezle 3 роки тому

      Huzzah! Happy that it helped!