Відео

They mostly work in banking industry when You require to have hard copy (they print on double / third copy paper) so they were printing for years for 12hrs day - so I would say for printing at home it will work indefinitely and You don't need to consider it. When print-head fail - you will have missing line. If print appear faded and You have new tape - then adjust "copy" lever it will move print head closer to paper and improve result.

Good choice, recommend try one day just to have expectations adjusted. I used my central heating failure as test ground and wash myself for almost week using this heater + portable shower (I also have it on my channel) - I was very happy with result. Better try in controlled environment than when shit hit fan.

@@ElectronicNoobBlog yes I will try this next weekend, but I get petromax Pyron on Friday …

On Windows just grab vintage PC laptop computer that have native fire-wire port so camera can be directly attached. "Magic" is in camera not adapters or software.

Yes, It's motorola ION it's running Android so You can install normal apps. You can take look at my other videos I present it more deeply form radio perspective.

What do You mean 39Ah? It was not 39Ah, here is video from replacement: ua-cam.com/video/lSDHlfCur-g/v-deo.html On full brightness without any problems last more than whole night.

@@ElectronicNoobBlog that's great...can the pelican charger still charge the lithium battery?

@@Rob-ow3bx I rigged up dedicated lifepo4 charger, just grab generic one - cut plug and wire as on genuine Peli.

Real one have something called amplifier and they amplify weak light, we use IR because human eye can't see it and it's more covert - whole idea is that good military one are enough to amplify moon / stars light enough to make it seen in NVG as daytime. Digital "fake" and cameras (like on video) do not contain ANY amplifier so they REQUIRE light source to operate (still we use IR since it's not visible to human eye).

@@ElectronicNoobBlog thanks

You should start noticing that UV emission is lower (basically You stop getting sunburns, tanning effect) - of course i'm pretty sure there are dedicated UV watt meters but I never had need for exploring that. There are UV detector cards - maybe You can use them to judge power?

No problems at all, I was often using dot matrix with USB-paralel adapter without negative impact..

@@ElectronicNoobBlog No speed problems? I know parallel port will always be slower than USB - specially when Windows outputs is as graphics.

@@jlatala4655 I don't think so, as long You use USB 2.0 not 1.1 then limiting factor will be LPT protocol not USB adapter.

You're welcome!

Glad You get it up and running!

You're welcome!

Glad it helped! Hope You will have great time with it!

Hey, sorry I don't do repairs - I play only with my own stuff that worst case I can throw out if fail.

Thanks for the visit

It is like 12 years old product and with all my hatred for companies that preventing repair I would never require them to carry any spare part so long. There are standard cells - You can rebuild battery pack, there is nothing that prevent You to do so don't throw it out, tear down, watch some YT videos how to put battery pack and You will get more capacity than when it was brand new. Battery wear out, die out of aging - nothing wrong with it!! Sherpa 100, 50 are brilliant and I like them over latest models! Save it!

24V/1.2V = 20 cells

I believe I had on video more scary with metal claw type... previous one was like from "elms street" But still it's crazy... thank god we live in better times.

@@ElectronicNoobBlog Better, but scary times. The world has gone mad! 😳

@@BoB4jjjjs Yes, Gary Jules "Mad World". Good catch!

Thank You!

Yes it's 1:1 speed.

The back one? It's looking generic to me, check out Aliexpress, i'm positive You will get one with free shipping. If You can't get same hole size, just get one with slightly larger and drill it out.

Sorry I have no idea how I managed to miss Your comment, , personally I never saw them fielded, I checked online and looks cool, I think i saw iDEN similar phone from US in past, favorite GSM model of mine was "alcatel one touch max" as You can put regular AAA batteries in case of emergency - but sadly it's just history...

Does it have impedance transformer? Always close to 50Ohm?

Normal IT troubleshooting is to unplug absolutely everything but in this case, unplugging the data cable contributes to the fault.

@@TheShortbiker You are welcome! Exactly! Usability is not strong side of cheap china stuff!

Exactly, who would want be poked in eye?

I have same problem, any hint's how make gooseneck more stiff? I have this issue in multiple real military (PRC25 style). I was thinking about dipping it in "resin flux" and let dry - could it help with friction inside? Since everyone favor shorter one - we might do field test and compare short blade to "rubber ducky" they are similar length - it might be interesting.

@@ElectronicNoobBlog I think, The best solution would be not to use the gooseneck at all.

@@VicGreenBitcoin I'm afraid it will change electrical length since it's part of antenna?

@@ElectronicNoobBlog Yes. That's why I also hinted at the name Abbree in my first post, these are a good replacement for the original. Having said that, I am personally not a fan of the goose antenna solution 😬

I don't think I work with MQTT, I would start from making sure that server is accessible thru localhost and it's port prior to touching anything else (telnet localhost port). Then check if firewall is not blocking connection, I would just disable it instead guessing that rules are correct. Then I would check MQTT server configuration file to make sure it listen on all interfaces usually by using 0.0.0.0 IP address in config file. If all above work fine, then I would make sure I can ping back my radio from MQTT server (sit on server computer and type ping 13.0.0.x where x would be radio ID attached to USB - if it fail create route). If this also fail I would disable all network interfaces on server computer (ALL OF THEM) and make attached radio "default gateway" if this step resolve issue You know it's about routing table. That would be my generic starting point not specific to Your application but this is how I would attack it.

@@ElectronicNoobBlog thank you very much for your response, MQTT is working on DMR TCP IP, turns out that you need to point the data on specific port, in my case, I use 1883 (MQTT default). I was suprise that the DMR can handle data sending in a 5 second interval, I test it in a sensor simulated environment where publisher PC is sending a JSON file. Also working with multiple LAN connection since my database is in a separate server .Here's what I did. - Set MQTT port to use 1883 - No routing configuration on both computer - I am using XIR P8668i so you need need to disable USB HID Route. - set USB network of MQTT server matrix to 1 for priority. - Test also multiple publisher using Radio group ID (just set the sending interval to min of 25 sec or the DMR will go crazy and disable its USB conenction) I will try this tomorrow using actual modbus RTU with actual sensor and actual data. If it works, I will use it in actual weather station. Ahahaha. Thank you again -

@@thegoodindoorlife You are welcome, glad You get it working. To get better latency, set on radio set preamble to 0, and disable data call confirmed and if possible set it to use UDP instead TCP. I assume since You have data from sensor if one measurement will get lost it won't affect overall - and it will dramatically improve latency and throughput!

If Motorola would give access to their API it will open lot of possibilities, but I tried and they wanted me to be company so I was unable to meet requirements to apply... I wanted access to network stack and write custom software for sending emails...

@@ElectronicNoobBlog Imagine if they make tablet radios ?

You are welcome!

200Ah is capacity, notice h for hour - You can always go with greater capacity, in general this is good thing with rare exceptions but You can disregard them. So if You plan use 300Ah then no problems - it will just have longer autonomy run time.

@@ElectronicNoobBlog Hey! Thanks for a fast reply! Now i`m more confident in my plans!

TSE, Tactical Support Equipment - just goggle their page - they have couple models - I very enjoy can size version but don't go into commercial UHF so I switched to this.

@@ElectronicNoobBlog 5k is a lot it’s an awesome antenna but can’t afford it I’ll see if I can make one

@@davidperalta876 It's not worth anything near, cost is due to low volume. Definitely You can do something from measuring tape - I seen it with great success. Anyway add it to eBay watch list, one day someone will list it in normal price and You get notification:)

Thanks for comment, I don't think so - from my point of view it looks to expensive You go into "Hytera multimode" price point territory but in return You got low quality stuff. I had couple PoC devices from Inrico and all had issues. If that would be, 200-300 euros - I will consider because I like concept but for their asking price +1K EUR I would buy something used from Hytera like PDC680 - and those devices were deployed in real life and have some level of assurance they actually have know-how in pulling it off and maintaining software. Just my opinion maybe they done 180 and now make great quality.