- 13
- 10 397
Raw Cuts & Shots
United States
Приєднався 22 бер 2020
#Woodwork #Photography #brownwoodworker
Hi,
My name is Rico. I am a student in the art of woodworking and a hobbyist photographer. Check out my channel to enjoy how-to videos, lessons learned, and my photography journey.
Hi,
My name is Rico. I am a student in the art of woodworking and a hobbyist photographer. Check out my channel to enjoy how-to videos, lessons learned, and my photography journey.
Praktica LB2: Underrated & Cheap 35mm beginner film Camera
#Filmphotography #35mmcamera #underratedfilmcamera
Hey youtube!
Check out my newest video. A quick review of the Praktica LB2 35mm camera. Please leave a comment if you have more questions or if you have a 35mm you'd recommend for a new film photographer.
In short, this camera is beginner grade, the lenses made for it are cheap, it takes awesome pictures, and is considered super underrated.
Thanks for watching!!
Music used in video is from uppbeat:
uppbeat.io/t/qube/lost
uppbeat.io/t/walz/ryan
uppbeat.io/t/fe77a/eternal-bliss
Hey youtube!
Check out my newest video. A quick review of the Praktica LB2 35mm camera. Please leave a comment if you have more questions or if you have a 35mm you'd recommend for a new film photographer.
In short, this camera is beginner grade, the lenses made for it are cheap, it takes awesome pictures, and is considered super underrated.
Thanks for watching!!
Music used in video is from uppbeat:
uppbeat.io/t/qube/lost
uppbeat.io/t/walz/ryan
uppbeat.io/t/fe77a/eternal-bliss
Переглядів: 1 428
Відео
DIY Large Cheese Board
Переглядів 212 роки тому
How to make a Charcuterie Board, aka cheese board, serving board. This is a DIY, you can get pieces cut to length by a friend with power tools, home depot, or lowes. This particular board is 24 inches long by 14 inches wide. It was made for a dear friend of mine and as a big family serving board and has 3 pits filled with river rocks and clear epoxy. Tools and supply you might need: -Circular/t...
I Made The Farmhouse Bench From TheCreativeMom.com, Here's How It Went
Переглядів 1294 роки тому
#woodworker #thecreativemom #Rawcutsandshots This is a video showing a farmhouse bench I made for my Wife. I followed the plans on www.thecreativemom.com/2x4-farmhouse-bench/ and built it in about 2 hours. The wood was scrap given to me so I had a couple of 2x6s and a few 2x4s. If you love the channel you can support us by checking out our Raw Cuts & Shots Merch! teespring.com/stores/raw-cuts.....
Duaflex II Restore & Review
Переглядів 2,9 тис.4 роки тому
#Photography #Filmdeveloping #Rawcutsandshots I recently purchased this cool little camera from a local yardsale. I've seen these on display in many designer shops and wondered if I could restore and use it after many years of sitting around. This was a restore and review of the Kodak Duaflex II. Hope you enjoy. Raw Cuts & Shots Merch! teespring.com/stores/raw-cuts... Like, Comment, Subscribe, ...
How To Make Giant Jenga From 2x4s
Переглядів 1564 роки тому
#woodworker #exoticwood #Rawcutsandshots This is a video showing my process for making a quick giant Jenga for backyard fun. I took the long way and made it from 2x4s but you can use 2x3s and be finished way quicker. Of course I love the Shou sugi Ban Rustic look so I had to put my spin on it. The wood was scrap given to me. If you love the channel you can support us by checking out our Raw Cut...
How To Make An Exotic Wood Cutting Board
Переглядів 2,3 тис.4 роки тому
#woodworker #exoticwood #Rawcutsandshots This is a video showing my process for making a quick exotic wood cutting board from start to finish. The wood is sourced from local lumber providers in Northern California. This board has is made of ash, walnut and has purple heart and padauk inlays. Wanted to share a quick look at the process. Hope you enjoy. Raw Cuts & Shots Merch! teespring.com/store...
How NOT To Make Easter Decorations
Переглядів 664 роки тому
#woodworker #Charcuterie #Rawcutsandshots The wife wanted some Easter Decorations so I thought it would be a fun easy project to hack out quickly. I've never looked into how to make yard decor but figured I'd give it a shot. My approach original approach did not work out and I ended up fixing more that I did building. So here is, How NOT to Make Easter Decorations. Hope you enjoy. Raw Cuts & Sh...
How To Make An Epoxy & Walnut Board
Переглядів 374 роки тому
#woodworker #Charcuterie #Rawcutsandshots Recently made a Serving board using some beautiful blue tinted epoxy and a piece of scrap walnut wood I had in my garage for a buddy of mine. Wanted to share a quick look at the process. Hope you enjoy. Raw Cuts & Shots Merch! teespring.com/stores/raw-cuts... Like, Comment, Subscribe, and Share ua-cam.com/channels/GvV.html... Follow us on: Blog: rawcuts...
How To Make A Live Edge Walnut Side Table
Переглядів 854 роки тому
#rawcutsandshots #Liveedge In this video I take an old black walnut slab that was drying in my garage and show how I made it into a side table from start to finish. Right away I knew this project would take a few days, so I procrastinated a bit and knocked out a few pending projects for the house. When I got to it, I weighed out my options and saw that it definitely needed to be flattened with ...
How To Make A Live Edge Serving Board With Railroad Spikes
Переглядів 7354 роки тому
#woodworker #Charcuterie #Rawcutsandshots Recently made a Serving board with Railroad spikes and a walnut live edge for a buddy of mine. Wanted to share a quick look at the process. Hope you enjoy. I started by drawing my design on the wood. Then cut it using my band saw. It began to bind a little so I had to add a couple of wedges. Once cut, I smoothed out the rough wood with my craftsman benc...
Good Restoration
Young man, they make 620 films. Search Google for Film Photography Project they carry the film and it's not expired as well as BH Cameras.
Thanks! Didn't realize how easy it is to take this camera apart and clean it. I have a roll of B&W in camera now, will clean it after this roll. Hoping to have better luck with the photos than you had. If I'm not happy with results will probably look for a Yashica Mat TLR. Thanks again!!
liked and subscribed. i love these old prakticas. ordered one for ten bucks with sketchy shutter. that front shutter release is so cool.
Your pictures might be soft because you got the lens out of adjustment when you removed the focusing dial. You need to find infinity focus by focusing on a distant object with a ground glass at the film plane and reset the dial. The Kodar lens on the Duaflex is a nice little triplet anastigmat that is decently sharp. Kodak actually made a couple of "real" TLRs, but the Kodak Reflex listed at $100, while the Duaflex was $17.25. The lens on the Reflex isn't a tessar. It's a completely different design with four elements in four air-spaced groups. A tessar has four elements but in three air-spaced groups. The rear group of a tessar is formed of two elements cemented together. Duaflexes are also prone to light leaks if the hinge gets sprung and you need to tape up the camera with black tape. There isn't any foam. I've never had trouble with the little red window.
Nice video, thanks a lot. I'm about to buy a Praktica LB2 and that helped me :)
I have this exact camera and my pictures are all coming out blurry. For your lens, I saw you twisting the lens itself, is the lens supposed to twist too, or just the focusing knob? I'm wondering if my lens is gunked up and stuck and might need to be finessed a bit.
Hi, I twisted the lens in there because I accidentally moved it from its original seated spot. The focusing knob pushes the lens forward and back. I didn’t try portraits but best results were landscapes. I’d say twist the focus know to see if it actually moves then try wiping the lens a little with a non-alcohol solution and try again. Best of luck
That’s a beautiful cutting board. I’m going to have to up my game on my own cutting boards.
Nuts. I was hoping to get a good look at the shutter and flash timing mechanism. I would guess most light leaks are from deteriorating seals but you can easily rig up a Velcro cover for the red lens or even a bit of electrical tape as a flap to cover it except when winding.
Yea I didn’t think to mess with that bit since it was one of my first restores. Also fair point, I now replace the old foam in cameras and check for light leaks. Thanks for watching
Damn cool shot at 19 seconds! Busan?
It is, 😀
@@rawcutsshots9304 Cool, I remember u breakin in!
I have one of these same cameras from my grandfather. I am interested in dusting it off and trying to use it again. Any tips for cleaning at home? Suggestions on solution? First timer over here and definitely don't want to mess the camera up!
Hi, that’s awesome. You don’t have to strip it down to cleanse it up. I recommended lightly blowing a little canned air inside to remove the dust and wipe the dusty parts outside with a qtip. Then wipe the lenses with a microfiber cloth. Let me know how it turns out 🙂
Hmm 🤔 no planer or jointer used. Not good
Hi, thanks for watching. Definitely used a planer starting at 4:10. And you don’t need a jointer if you use your table saw to cut to length and desired width. Have a good one 😊
@Raw Cuts & Shots thanks for reply what I should have said was your initial cuts prior to gluing, I did not see you plane the surface of the wood. You are correct you did plane AFTER glue up. It looked like raw lumber unsurfaced on all sides.
@@sakaj oh, I see what you mean. I guess I don’t see the harm in not planing if it meets the same result. Maybe reduces chipping if the planer catches an uneven surface? Thanks for the tip 🙂
@@rawcutsshots9304 Have a good weekend. 👍
p͎r͎o͎m͎o͎s͎m͎
I did it with the woodglut plans.
Neat video mate! They are very similar to thr Hanimex 35mm cameras. Not bad at all! Cheers for sharing!
Oh wow, I had no idea. So much history with these Praktica/Hanimex cameras. Thanks for watching
why NOT ?
Because I did it the long way. I should’ve just used 1 big board. 😅
nice one
😊
Thank you for showing this!
Hello, I just wanna ask if do TLR/medium formats camera break down? Like can you still use it even its old? Btw this is a great video!☺️
Hi, most of the older TLR cameras (if they are completely mechanical) can still be used no matter the age. In some cases a spring can rust and should be replaced, or the leathers wear down and can also be replaced. Great question, thanks for watching.
@@rawcutsshots9304 Thank you very much for answering my question!!☺️ Have a great day/night☺️
These were made as a pseudo-TLR during the 1940s-1950s TLR craze. The rolleiflex was very popular, but largely inaccessible due to price. This was kodak's attempt to cash in with something that looked like a TLR, but was in actuality a box camera with limited manual functions (aperture and zone focus) Kodak did make a proper TLR, the Kodak reflex and reflex II. It was $175 new in the late 40s and early 50s, and has a very capable anastar lens of tessar design.
Very cool! Thank you for the info! That is neat! Lots of history :D
Great video I just bought the same camera and i can’t wait to put it to use
NICE!
How much do u charge for one like this love it
Hi, thank you. This was a custom piece, they range in price depending on materials. We love new challenges and would love to get one started for you. Visit us at rawcutsandshots.com to contact us and get quotes on custom orders.
Lol at the noises in the background