Відео

Cool! Appreciate it!

Thank you! Appreciate it!

Thanks! Not that good, but that was to be expected... Because I used construction wood, the hammer broke after a few days during striking. If you plan on making one, definitely use a proper wood like ash or hickory. Flying hammerheads can be quite dangerous... After rehandling it with a proper handle, it worked fine though.

Hey! To be honest I don't remember. I used a template from 'The Essentials Club'. I suggest you check out their blog which I linked in the description. Good luck!

Hey! Sounds good! You should have enough with one bag but be careful with removing the handle strips. The bag itself has more than enough material but you need a good length of handle strip. Also I recommend make a one layer hat like I eventually did. Good luck!

@@TF-Projects Thanks!

I am using SolidWorks

Thanks! To be honest I don't know. Just a regular needle that came with the machine.

Usually, It's a 90/14 needle, and for the presser foot, if you have a combi foot, (Zigzag, Runner e.g) I use that, otherwise you can switch between a zipper foot (does zigzag stitch) and the regular pin hole presser foot (one that does runner at a 0 offset). Hope that helped!

Not yet, unfortunately. I'll have to make detailed drawings of all parts first. I might do that if I can find the time.

Thanks! Luckily I could copy all the pioneers from back then 😅

Thank you! I agree. I'll have to spend some time learning and practicing to fully understand what I'm doing.

Hi! To be honestly I don't often wear the hat... It is made from plastic so it will probably be quite sweaty😅. Nonetheless, it's a fun project!

Thanks! I appreciate that!

Thanks! Unfortunately, there is no set of drawings yet. I have it as a 3D model. But to make it a proper set of drawings, I'd have to put some more time in it. Unfortunately, I don't have a lot of time. If there is any part in particular you would like to know the dimensions of, let me know. I could make one or two quick drawings and send them to you.

My number 1 fan with his 1st comment of the year

📠🖥🚲📱🚟🚃🚨🏎

Thanks a lot!

Good idea!

I understand what you mean, in my case I think the rubber band is just too weak and the key is too heavy for the rubber band. Thanks for the suggestion!

Unfortunately not. The files are not print-ready and as you can see in the video the mechanism doesn't work properly. Therefore I won't publish the files. However there should be more downloadable files available on sites like Thingiverse. I hope you can find something there!

@@TF-Projects ok thank you

Thank you very much!

The one and only

Very glad to hear that! I haven't published the STL files. If you'd like I can send them to you personally via WeTransfer (without the mistakes of course ;P).

Dankjewel! Horizontaal is beter inderdaad. Maar verticaal is mooier ;P

Haha! Yes it really looks like it spins the wrong way. I was pretty sure I did turn it in the right way but on camera it really doesn't look like that... Oh well. Thanks for the feedback!

Dankjewel! Ik zal het model niet publiek delen omdat het mechanisme simpelweg niet goed werkt. Maar als je het graag wil kan ik je een wetransfer linkje sturen met de 3D bestanden.

@@TF-Projects dat zou ik erg fijn vinden, ik wil graag mijn best doen om het beter te maken. Als het me dat lukt stuur ik mijn 3d werkstuk terug en kun jij een nieuwe video maken met een verbeterde versie (:

Dit is de wetransfer link: we.tl/t-M7VSyKj6fG Hij verloopt over een week. Succes!

Good suggestion! You can't really see it well but I already did one extra loop. Another extra loop would be too tight unfortunately.