![@hobbybike51](/img/default-banner.jpg)
- 190
- 397 161
@hobbybike51
Canada
Приєднався 6 гру 2022
Pay for as little and do as much as possible for FREE!
All music by either Richard Cooke or Stephen Buck! Links down below.
Prepare to be inspired!
I reuse everything and so can you! I'm doing these projects anyways, so why not share with everyone?
Although I can simply buy all the latest kit, it would defeat the purpose of the channel! There's no point in buying anything new with so many usable items accessible for FREE, discarded every week! Watch as I acquire better equipment for FREE to showcase all the other items I get for FREE. I'm sure my film making skills will improve as well lol!
I'm a purist full strip and rebuild hobbyist and collector mostly related to bikes, wheels and their parts. My hobby perpetually pays for itself because I harvest and reuse as much as possible.
Check out The Dump where I post my other videos!
All music by either Richard Cooke or Stephen Buck! Links down below.
Prepare to be inspired!
I reuse everything and so can you! I'm doing these projects anyways, so why not share with everyone?
Although I can simply buy all the latest kit, it would defeat the purpose of the channel! There's no point in buying anything new with so many usable items accessible for FREE, discarded every week! Watch as I acquire better equipment for FREE to showcase all the other items I get for FREE. I'm sure my film making skills will improve as well lol!
I'm a purist full strip and rebuild hobbyist and collector mostly related to bikes, wheels and their parts. My hobby perpetually pays for itself because I harvest and reuse as much as possible.
Check out The Dump where I post my other videos!
Watch me lace a rear disc wheel Shimano style! Long AF version!
Here's a raw footage video on how I lace a 32H rear disc hub using the Shimano disc lacing standard. This method eliminates twisting the hub and aligns logos nicely!
#shimano #wheelbuilding #diy #free #cheap
#shimano #wheelbuilding #diy #free #cheap
Переглядів: 28
Відео
DIY adjust shifting at home!
Переглядів 36616 годин тому
Clockwise loosens (big to small) and counterclockwise tightens (small to big)! #bikemaintenance #shimano105 #shimano
My wife's new rack!
Переглядів 44414 днів тому
I see a lot of cyclists with unlevel rear racks, so here's how to level them! #level #bikes #tools
Build a fixie for FREE! Short AF zombie edit!
Переглядів 1,1 тис.21 день тому
Here's the super quick version of a fixie I built for FREE! #fixie #bikebuild #free #cheap #diy
I built a fixie for FREE! Long AF version.
Переглядів 1,2 тис.21 день тому
I built a fixie for FREE! Long AF version.
Bike shops are scamming you! Watch!
Переглядів 2,2 тис.Місяць тому
Bike shops are scamming you! Watch!
Lace a bike wheel in 4K! Long AF version.
Переглядів 94Місяць тому
Lace a bike wheel in 4K! Long AF version.
Torque Wrench Talk with Comment Bugaloo
Переглядів 592 місяці тому
Torque Wrench Talk with Comment Bugaloo
Fixie/single speed conversion with problems
Переглядів 7612 місяці тому
Fixie/single speed conversion with problems
Strip a bicycle wheel using just power tools?
Переглядів 1402 місяці тому
Strip a bicycle wheel using just power tools?
Carbon compression plug 2: Comment Boogaloo
Переглядів 752 місяці тому
Carbon compression plug 2: Comment Boogaloo
Yes, you can use longer spokes to build your bike wheel!
Переглядів 9332 місяці тому
Yes, you can use longer spokes to build your bike wheel!
Increase profits! Remove bicycle-wheel spokes and save money!
Переглядів 4792 місяці тому
Increase profits! Remove bicycle-wheel spokes and save money!
The best nipple-stripping spoke wrenches!
Переглядів 1333 місяці тому
The best nipple-stripping spoke wrenches!
Install a stem extender to eliminate play
Переглядів 4193 місяці тому
Install a stem extender to eliminate play
FREE! Build the hub you need from another you don't.
Переглядів 3403 місяці тому
FREE! Build the hub you need from another you don't.
HED no-spoke hole rim hub swap - Worst-case scenario
Переглядів 1,6 тис.4 місяці тому
HED no-spoke hole rim hub swap - Worst-case scenario
Increase profits! Servicing Abandoned Shimano Shifters!
Переглядів 1014 місяці тому
Increase profits! Servicing Abandoned Shimano Shifters!
FREE threaded to threadless headset conversion?
Переглядів 2,7 тис.4 місяці тому
FREE threaded to threadless headset conversion?
Respoke a deep-V single speed bicycle wheel
Переглядів 1495 місяців тому
Respoke a deep-V single speed bicycle wheel
FREE! Custom wheel mod for cold-set fork
Переглядів 4265 місяців тому
FREE! Custom wheel mod for cold-set fork
Pretty fast and useful, thank you❤❤
👏👏
She has a nice rack
Thanks! Nobody wants a droopy rack, that's for sure.
What brand is the bike @hobbybike? Appears to be a vintage frame. I have vintage GT's. Just wondering if the bottom bracket situation is at all similar. GT Outpost Trail & GT Palomar, both large mtbs.
Thanks for the comment 👍 ! No clue what make/model but it can't be too old since the fork is threadless, but old enough to be heavier steel; probs early 2000s. This one has the standard 68mm BB shell, even though the BB is labelled BB73 @ 4:17. One thing distinctive about older GT models is the extended seat stay at the seatpost/TT area, which this frame lacks.
DO NOT POWER WASH or spray water under high pressure to clean. Power washing will force contaminants into parts where they will promote corrosion, immediately damage, or result in accelerated wear. DO NOT USE COMPRESSED AIR TO DRY. DO NOT USE ABRASIVE OR HARSH CHEMICAL CLEANER/SOLVENTS which can damage the finish or attack and destroy both the outside and internal parts. When rinsing, avoid directing the spray directly at shock/fork adjusters or bearings. genius
It's a rescue bike in a car wash lol! How much pressure is too much? Give some examples to help the masses. Oh, and thanks for the comment!
she's pretty brave for letting you do this as this kind of thing is usually done by a professional. i'm sure both of you'll enjoy having it.
Satisfying my wife has, is and always will be FREE! No professional help needed, but you do you and seek assistance in whatever you need🤣!
What happens to your level rack when you're going uphill? It's no longer level. Bet you didn't think of that.
Do you smell burnt toast?😆 In all seriousness though, explain how it's not? Convince me.
Usually when a dude is talking to people about his wife's rack, he's going to get into some hot water.
I've had same problem with Shwalbe Crazybob on my Mavic's rim (Mavic325) That depends of inside ø tire and there are not same standards with small differences
Thanks for the comment! It was defective and promptly refunded!
Hello 🇨🇦 How much was the truing stand with the base ?
Free! I traded up until I made a deal for it. Brand new, too! 😆
@@hobbybike51 lucky !
its not a fixie if it has breaks
All good! Thanks for the comment and you're not wrong.
Is a fixie not just a bike with a fixed gear? That's what i think, most fixies come with a front break too
@@Demoniczny09 Thanks for the comment! The guy to whom you're replying seems like a true purist! However, I think the designation of fixie has evolved over the years. I've had dudes try to sell me fixies only for them to actually be ghetto single speeds.🤣
Them ring wrench blow 😢😂
Couldn't have said it better myself! Thanks for the comment!
Nice! Now I am searching for a cheap trainer lol. Always wanted to learn truing and wheel building but do not really have to funds for park tool truing stand. Oh new sub from me as well.
Thanks for the support! The goal of the channel is to do everything free or as cheaply as possible. I could learn from you as you learn, too!👍
The reason why it's just called freewheel fixie.
😕WTF?🤣
Good one
😁
This song is so distracting. The guitar and 808's are off beat with each other
Thanks for the comment! That's the point but you'd need to hear the entire song to get my perspective, preferably by subscribing!
Looks oddly familiar
It needed a new home!
It killed me when you put the freewheel on misleading title!
RIP😇
Flip flop bro, flip flop🗣️
I'd like to know the original bike brand.
“You could get SCAMMED if you don’t know this is here” no, it’s called knowledge. You pay a bike shop for their tools, time, and talent. Tools such as a torque wrench. Talent such as not clamping on the top tube. Also, your barrel adjuster is SUPER far out. You’ve gotta find a new shop. Our shop only sells parts if you actually need them. It’s very uncommon that we replace derailleurs. Front derailleurs are a pain to work with. At least your tire wear point is somewhat accurate. The two holes are different depths. Once the first hole disappears, it’s a sort of warning. Once both are gone, they need replacing.
I have already achieved success doing this because of low talent and knowledge at bike shops (don't forget the fly-by-night garage guys that appeared during COVID), which is why I'm doing youtube😆; you don't do youtube if you're NOT ALREADY successful! I don't use shops, but the owner of this bike did which begs the question: why is that bike on this video? However, I do appreciate that you actually watched the vid and accept your opinions.
I won’t take advice from ANYONE clamping a carbon frame by the top tube and not using a torque wrench. Thats NOT how to work with carbon. Any bike shop worth its salt should have free estimates or free appointment consultations. This isn’t “bike shop scams” this is basic bike maintenance anyone can learn… Not sure what shop you went too/or worked at but this is not the right tone to have with this. Here is an idea. Price shop menus 45-60 min from your house and chose accordingly.
Read the title, bigboss!
You seem to have a really low opinion of bike shops, perhaps you’ve been scammed at some point but I think this is a really unfair way to portray them by suggesting everything is a scam. Many jobs on bikes are quite simple but that doesn’t mean that we should always assume we should do them ourselves because a shop will scam us, at some point even the best home mechanic will more than likely require the services of a good shop. Your point about bolts being undone so far and then done back up the same amount is no excuse for not using a decent torque wrench, it’s just good practice to use the right tools for the job, your way assumes the bolt was at the correct setting to start with which is hugely flawed. Finally what you did with that chain dropping it to the inside of the chainrings onto the paint and turning the cranks….🤦 I’m glad you’re not working on any of my bikes.
I've never been scammed, but others have. I don't assume this, others have proven it. You paying for everyone to have a torque wrench? You should watch the video again, look and listen closely before making assumptions. Thanks for a comment.
@@hobbybike51 bro if you are working on a 1k+ carbon bike, you can afford a $50 torque wrench. Hell they are cheaper than that if you get the preset ones. If you have a carbon bike you should have a torque wrench. Your logic is like this "If I only have a sledge hammer why should I buy a claw hammer to hang a picture?"
@@hobbybike51Whatever the work, you use the right tools.
@@ChiTownBrownie89This clown would use the sledgehammer and tell people to just not hit it as hard.
Sounds like you went to some shady shop.
Not me brother, not me. Thanks for commenting!
I need help, so I mechanic,,,,they come
I appreciate the comment! Keep learning and helping and even more will come!🤜
I lasted 4 minutes in to the video when i saw you not use a torque wrench for the carbon seat post and as already mentioned by others clamping a carbon top tube in a work stand. Please stop doling out bad advice and leave the bicycle maintenance to the professionals.
No explanation either? I'd love to hear why!
Guy needs to look up the word “Scam.” The only Scam is losing 12 minutes of my life watching this garbage. What a 🤡
You watched it all? Thanks bro!
Some good tips. Also watch out for bike shops that don't let you know what you need just go ahead and replace parts on you. Some bike shops will even remove you're high performance parts and put on cheap ones if you aren't careful. I've had fellow Cyclist having these experiences. Even I've had this happen and requested my parts be put back. I try to do as much of my own work on my own bikes because of this. Slowly building my cycling tool set.
Thanks for the additional info to help others out! I've built my array of tools by fixing up bikes I found for free at the curb and resell them cheaply to uni students, young families and so on. 😃
Good tips every bike owner should be aware of. There are so many things the average rider can learn to maintain themselves!
Thanks for the positive response! Yeah, don't let the bike-shop bullies boss you around!💪
Don't forget to PROVE your claims on that top tube clamp gripe, don't just parrot! In the meantime, Check this recent reddit post: www.reddit.com/r/ottawa/comments/1duwhfh/bike_repair/
Holy crap this video is full of absolutely terrible advice. Who call's Aksium wheels "Expensive"? I don't get how any of these are "SCAMS" - bring your bike into a bike shop extremely dirty (which makes it super annoying to work on/fix). No bike shop would re-dish a whole wheel without checking alignment.
Listen to richy rich here😆! It's all the truth. Your listening skills are weak. Watch again, bigboss!
I made it to 8:50, he was checking for chain wear with a 12 inch ruler!
@@Randombourg And?🤷♀
First off, you do not put bike on stand via the top tube.
Why not? Bro science or just parroting?🤣
Bonus for calling that out...First thing I noticed also. If the first move is to clamp my carbon bike in the middle of the top tube, most likely a "scam" tech. 🤡🌎
Why's that? Trust me bro science again?
@@hobbybike51 because its easy to over clamp carbon and crack it. Also you tapping is a myth, lots of carbon repair places do not recommend that as paint can effect it, hell xray is even outdated now.
@@ChiTownBrownie89 Thanks for answering since none of the bullies could🤣! Think about it: that little clamp will crack carbon fiber frame? Really? In comparison with all the stress the stays/joints take? It's just parroting, like lawyer lips. Yeah, fingernail tapping is about all one has though.
It amazes me that it costs more to service a bicycle than it is to service a car.
It literally doesn't.
@@lenolenoleno Oooo, burn 🤣
Thank you for your observation, view and comment!
I've been searching for content like this! Subscribed, and I'm ready to believe in myself! - "Self-belief is your greatest strength."
Thanks! Saving money is also like making FREE money💰. Keep watching and you'll see my method of making money from home🤑!
I know what YOU would do ;)
yup!
Bro if the helmet wasnt on hed actually be dead😊
The ending reminds me of the wild west days of the internet. Gonads and strife!
Weeeeeeeee!
My guess is the inner housing wasnt machined perfectly so the bearings dont sit flat so she turns to the lowest spot
Yeah, either the headtube or the fork legs are off somehow.🤔
Hello sir what is this to use to up the stem please name this component
It's just a threadless headset comprising a crown race, cartridge bearings, compression ring (wedge), dust cap, spacers and a top cap w/bolt.
Gordon, why isn't that wrapped
What is a helmet going to do
Tf a helmet gonna to agaknst that😂 the injury is on his sid
I have heard about trailing spokes going under instead of over or vice versa is it necessary?
Thanks for the question. Where did you hear/read this? Just so I can see what you're saying in context. Seems like a good video topic🤔!
unsafe
How so? Bro science?🤣
@@hobbybike51your handlebars are held in by threads, which threadless stems are not meant to. They're supposed to be clamping pure and plain metal, theres air gaps in between the stem and the fork so it wont be a tight/reliable seal.
@@SteadySuspender I accept this! Thanks for taking the time to explain. This might be a new video topic because I've never heard this counter argument! Comment on all my stuff lol!
@@hobbybike51yeah no problem
Przed pierwszym użyciem należy "kliknąć" 4-5 razy ustawionym momentem aby sprężyna się rozgrzała.
That's great advice and thanks for the comment! It helps everyone! I mentioned testing it out first in the previous video, but not in the sense of a warm up. Well said!👍
Thanks for the video. I agree with everything except for needing to unwind the spring to the lowest torque value everytime you store it. I dont know if you mean storing it for 3-6 months sure it is good advise because of spring memory and such but if you are going to use it the next day it wont really make a big difference.
Thanks for the inspiration! I just showed how I do it as a hobbyist, like the audience I target, whom probably use it once a season. Feel free to comment on all my stuff because it helps everyone out. Enjoy your day!
Grease?
FREE grease! 👍
Is it right direction? Two of my dicta freewheels open to counter clockwise. Those are ones that have notches for removal tool on other side. One dicta freewheel I have doesn't have notches for removal tool and it opens to clockwise direction.
Thanks for the comment! I was just messing around to see if it would open off the wheel. I salute you for watching this old stuff!
@@hobbybike51 haha, no problem! Just yesterday I disassembled, cleaned and assembled those two dicta freewheels. Single speed ftw ✌️
@@Pianist203 Cool! Did you make a vid of the process? Yeah, this one here the notches were on the opposite side so I couldn't thread it on the hub to hold it in place (i.e. cheap part).
@@hobbybike51Did not. I put removal tool on vice and open freewheel on top of tool. I've made a simple tool which makes it easy to loosen and tighten the ring (plank with two wood screws).
@@Pianist203 Sweet! Thanks for sharing.
Don't need a tool to install just pedal
Thanks for the comment. It inadvertently shows viewers the type of freewheel to get. 👌
Thanks to all for the support!
I have little experience with torque wrenches but shouldnt you hold the torque wrench at the handle to ensure torquing the bolts to the spec. Like the park tool demonstrates. ua-cam.com/video/BPe1-bDFVRM/v-deo.html
Interesting. Yet at the end he just tosses it lol!
Forgot to mention he doesn't store it properly, either! Just saying 🤣. I'll do a "how-to" vid and reference your comment. Thanks for the idea!
No clue why the best quality playback is 360p lol!