Відео

As long as people can understand what we are saying and helps them in making their own lures then I think the video is serving its purpose.

@@DavidMorgan-vj2rf it’s made by Kearby DM. Just beware that it’s extremely expensive lol www.kearbydm.com/product-page/3-8-ribbed-swim-8-cavity

@@eliwolfe9067 I don’t actually sell baits right now but I appreciate it. I just don’t have enough time to keep up with trying to sell baits at the moment

This jig head was dipped in the magic craw blue pro tec powder. Then I took a paintbrush and dipped it into the orange powder and sprinkled it onto the bottom. Then sprinkled some black on the top 🤙

There is a difference between them. Typically a Dye is a color that bleeds really bad so if you laminate it with another color it will bleed into the other color over time. Dyes are usually a little more translucent as well

@@N2TW_customlures are these 4 all dyes?

@@laneanderson4245 no, only the one that’s labeled as a dye is. The others are just considered a pigment and not a dye

Thank you​@@N2TW_customlures

@@laneanderson4245 no problem 🤙

Glad we could help 🤙 let me know if there are any other color comparisons you would like to see

Thank you and thanks for watching 🤙

@@ginolabella317 I’m just focusing on making the videos and teaching people how to make their own right now 🤙

@@N2TW_customlures oh ok

Ya I think it has to do with how fast that salt settles. I think it makes the bait slightly heavier on one side which leads to the gliding motion. I could be completely wrong tho lol

@@chriskirschner907 they have both been very productive colors! Thanks for watching Chris 🤙

@@kayakak77 the xs blades that I ordered and use are the .79” ones

@N2TW_customlures dude thank you, I ordered those spinnerbait hooks, I'm so excited to try it your way.

The Amazon ones are the same. Lol🤪

@@kayakak77 no problem!! I’ve been very happy with these and have caught a lot of fish on them

@@kayakak77 ya I ordered some of the gold and black blades from Amazon to try but the estimated delivery date is still a couple weeks away

I have a video on salt and what my opinion on adding salt it 🤙 weight and sink rates are the only benefit and only necessary on certain baits

@@michaelbarbieri9871 for a standard football head I use the mold below with an Owner 5304 hook. barlowstackle.com/Do-It-Football-Weedless-Jig-Mold-P260/?afmc=198 For a shakey head I use the one below with VMC 7247 long shanks hooks because I like screw locks but if you prefer no screw lock then I would go with the Randy Howell shakey head mold barlowstackle.com/copy-of-do-it-screw-loc-shake-it-jig-molds/?afmc=199

@@Senkomaniac I agree with that. I was really happy with how well the flour salt mixed in but it changes the color of the plastic a lot which I didn’t care for too much

@@N2TW_customlures have you tried silica sand/ glass sandblasting beads as weight? I know Yamamoto uses a mix of salt and silica sand.

@@Senkomaniac I havnt tried it yet due to glass beads potentially causing damage to injectors but im definitely going to try it in the future

I often wondered myself so I had to get them all to test them out

@@N2TW_customlures I have a Chart video coming out in 2-3 weeks I'll link this to it

@@Baitmakerz sounds good 🤙

It’s the Griffin Odyssey Spider vise. I’ll link it below. barlowstackle.com/Griffin-Odyssey-Spider-Vise-P2565/?afmc=rj

@@five.0custombaits thanks Toby!! Hope you have a good weekend buddy 🤙

I’m sure they would do great for some aggressive smallies!!

@@N2TW_customlures Absolutely, can you make me some of these? Electric Chicken, solid Pink or Chartreuse? I'm going to Canada in late August and the lake is filled with smallies and Walleye, mostly smallies.

@@frankhunt5018 unfortunately I can’t sell this style because of Zmans patent on the direct connection blade

@@N2TW_customlures Okay, no worries. I understand.

Thank you!! Appreciate your continued support

I really appreciate the kind words 🤝 thank you for watching!!

I’ll definitely look into those hooks. I’m always willing to test new stuff lol

I’m always tinkering with stuff and trying to find new ways to make stuff lol. Appreciate you watching 🤙

It’s super fun to play around with and you can make jigs with the exact hooks and components you want 🤙

Dink slayers 🥷

​@@N2TW_customluresthanks for the cool video. Just a question on the wire that you put the blade onto, does it not bend open when you are pulling on a fish?

@@Senkomaniac I have never had a wire bend open on me. Even on full size bladed jigs and catching larger fish they stay closed. I’m sure if you had a heavy rod, heavy line and set the hook like a linebacker then there is a potential but it’s never happened to me lol

@@N2TW_customlures cool thanks man. Appreciate what you do for the bait making community. You have inspired me to make my own lures and turn into a nice side hustle.

@@Senkomaniac that’s awesome!! Glad we could help you get started. Feel free to reach out if you have any other questions along the way 🤙

I’ve had extremely good luck with these hooks. Fish get hooked easily and stay pinned really well 🤙

I’ve caught bluegill, crappie and bass on these. They work really well 🤙

Thanks David!! It’s a lot of fun to throw on BFS or finesse setups

It’s a really fun thing to throw when the fish are keyed in on smaller profiles. Thanks for watching Clint 🤙

@@N2TW_customlures I’ve been wanting to downsize since I fish a lot a skinny water. I believe in what you said, sometimes the fish don’t want a monster bait

@@clintjenkins13 ya I downsize in skinny waters a lot myself

@@craigvandyke9298 it’s just some 3M double sided tape that I leave the plastic on the top side to keep the hooks from sticking to. I’ll link it below a.co/d/iL0qOEI

I’ve caught a ton of fish with them in our little neighborhood pond too!! So much fun to throw

Thank you and thanks for watching Paul 🤙

Glad you found it helpful!! Thanks for watching 🤙

@@calvinnegrete913 I’ve never had a wire form break on me using these wire forms. I’ve had a couple start to wiggle a little because of the soft lead but never actually had one break or come out

@N2TW_customlures yeah, i just don't know how to remedy it... 🤔

@@calvinnegrete913 have you tried using the WEY 525 wire forms

I believe so, i thought those would allow the eye to open up up due to the force of pulling the vibrating jig. If you hook the end of it in the hook eye, the opening where the blade attaches looks like it would open up... i guess not.. I'll try them! It can't hurt anything!

Thank you! Love your videos! 👌

I’m gonna be using it more now. It looks really good

Absolutely!! We have used it in several videos in plastics. There are other guys who have also used it in airbrushing paints and clear coats for hardbaits 🤙

It’s just like everything else and looks way better in person!! I’m really pleased with it

@@N2TW_customlures I've come to the conclusion I am not a good enough camera man to get the colors out of them LOL. I tried a photo booth but its the same thing

@@Baitmakerz it’s not just you. It’s a stuggle for all of us lol

That’s awesome!! Ya these 8Bit powders are unbelievable in person. It’s hard to capture on camera the full effect but they are truly incredible in person 🙌

Well I appreciate you watching them all lol. And as far the burn marks that was my drippotamus (lead pot) 😂 I plugged it in and started doing something else while it was heating up and next thing I know it’s puking lead all over the table lol. That’s why I now keep it sitting in that little metal tray lol

Really appreciate the kind words 🤝 and thanks for watching 🤙

@@N2TW_customlures watched every minute. I just got into making swim jigs for my kayak club on the Potomac River. This pattern is very close to what a lot of the guys throw during the Summer.

@@EvanMorsell that’s awesome!! Welcome to the hobby and feel free to reach out if you ever have any questions. I’ll help anywhere I can 🤙

Thank you!! Appreciate you being here 🤙

🤙

Yep. I have the full lineup 👍

​@N2TW_customlures used it yet?

@@JoeHasGotToGo ya I’ve tested it once and then used it in some powdercoat as well

Thanks Toby!! Appreciate you watching everything

Also just sent you a message on Instagram 👌

Thanks for watching 🤙 hope you have a great weekend

Thanks Adam 🤝 loving these new powders and glitters

I’ve got some more ideas for that color after seeing it mixed up 🙌

Thanks David!! Hope you have a great weekend as well 🤙

It depends on that trailer you’re using but I would probly drop down to a 1/0 size. I’ve even made some micro chatterbaits in the 1/8oz with a #1 hook and they work great with thinner profile trailers

@@N2TW_customlures ty sir

@@Raindropfishing no problem 🤙

I hear your the dangle expert so getting your blessing is truly an honor 🫡

@@N2TW_customlures 😂

It’s in the video description. You might have to click on the description for it to load everything 🤙

@@N2TW_customlures Just brings me to another of your videos.

This is what should be in the video description. These links are all from a year ago so let me know if anything doesn’t work Regular hooks ~ barlowstackle.com/Mustad-3288... Spinnerbait hooks ~ barlowstackle.com/Mustad-3260... Wire form ~ barlowstackle.com/WEY525-Wire... Queens tackle blades ~ barlowstackle.com/queen-tackl... Regular chatter blades ~ barlowstackle.com/bent-shakee... Snaps ~ www.tacklewarehouse.com/P-Lin... Spinnerbait wires ~ barlowstackle.com/Spinner-Bai... Beads ~ barlowstackle.com/Beads-Hollo... Clevis ~ barlowstackle.com/Clevises--P... Spacers ~ barlowstackle.com/Metal-Sleev... Swivel ~ barlowstackle.com/SPRO-Gamaka... Blades ~ barlowstackle.com/spinner-bla... Buzz bait wires ~ barlowstackle.com/Buzz-Bait-W... Buzz bait blades ~ barlowstackle.com/Aluminum-Bu... Rivets ~ barlowstackle.com/Buzz-Bait-R...