Відео

@@jdub929 just about everything in life is dangerous

@@dela_v8227 suspension, tires, and maybe a stall converter if you’re an Auto, go a LONG way

@badmaro304 I'm taking my car back to stock after the previous owner fumbled the build, but I still have a built 4l60e, 3.90 gears and a 2,800-3,2000 stall converter Personally I don't like those

@ mine had 3.73 gears, minor built 4l60e, all tubular suspension, drag radials, and a yank SS 3200 Stall converter.

@badmaro304 3.73 sounds better, my converter is a cheap 10" I'm guessing

@badmaro304 I don't have drag radials and, no tubuliar suspension, no weight reductions and I have most of my tools in my car lol

@@that_blobeye_sti that’s awesome, next time I’ll let your one opinion dictate that, that’s my fault.

@@The_Drive_Inside that was actually what inspired me to find some for my car

@@jarmaljackson yeah mine it’s so hard to get anything going when life is constantly trying to pull you down. Gotta make a mark somehow, can’t give up!

@badmaro304 I agree with that. I've had mine for over a decade I use to loge working on it not so much now a days lol. I took it out a few months ago so

@@Matt-d5v if you’re talking about the ones on the grey car they were custom made. They’re halo tail lights, the red car has some tinted euros but I just sold them.

@@badmaro304 yea the halos can you get them still

@@Matt-d5v no unfortunately, the guy closed business

@@badmojo7525 thank you I appreciate it! It’s about to go turbo now! And the headlights are just on Amazon

@badmaro304 I'm going nitrous ls but I still have the lt1

@@badmojo7525 yeah I ran nitrous for a very short period on my lt1 and it did pretty good tbh

@@badmojo7525 lt1 in this car

@@AnnoyedHot-AirBalloons-cf8jd so I ran 1 step colder plugs, and I had a tune done by strong Speedworks on it prior to install, I asked him what I would need timing wise and he said he wouldn’t pull timing until a 100 shot, he said about 2 degrees or so at 100 shot with a wet kit and I’d be alright.

@@AnnoyedHot-AirBalloons-cf8jd I also had a window switch to control when it would spray and a fuel pressure safety switch, so my system was very safe overall.

@@badas95Z I’m just getting the get off of eBay. There’s still gonna be a little fabrication involved to make it work but that’s a good start

@badmaro304 okay thanks. Do they have the crossover too or you have to make your own?

@@badas95Z yes there’s a crossover as well

@@Paypachasenmar bigger things always coming, just a matter of time💯

@@joshup I get it, stuff comes up sometimes and your only choice is to put the hobby on the back burner. That’s exactly what happened here too. I had to buy a daily car and I’ll be getting married soon as well.

@@alanjanda142 I just want my car back😩

@@beansuop I’m glad you watched through! I’m excited to get something going again, I appreciate it. Sounds like a fun swap man! 4th gen’s for life brother!

I’m actually going kinda back in time and putting an Auto trans from the 93 in with a manual valve body. Its built to handle around 800hp

@@josephcosgrove5326 we wanted to get some races to get an idea of what the audi runs, it definitely needs a better tune tho.

@@badmaro304 I meant to say wish I didn’t miss lmao

@@josephcosgrove5326 we gotta get you there brother!

@@jmartz1969 thank you I appreciate it!

@@alanjanda142 good guess💯

@@ALVINKFRM304 💯💯

@@acekapone1367 they’re custom made by rr.carcustoms

@@badmaro304 I have a 01 Camaro I’m going to be swapping from v6 to v8 and would love to put these on my car

@@acekapone1367 they would look pretty good! You can checkout rr.carcustoms on IG and see if you can get him to make another set. They’re quite pricey but look great

@@badmaro304 I went on the website they don’t have any products for sale at this moment. Is there any way I can call him to put in my order?

@@acekapone1367 he may be on duty for the military. He only works when he’s not deployed at the moment. At least that’s what I last knew about him.

@@aaronlive1541 I’d love to get a boss 600 kit, the tuning would be hard to find around me. The trans is only the 6spd Auto too

@@Noname-iq1gz yeah I wasn’t very impressed myself, it has way more power left in it though, i have to upgrade the injectors to get the power that it can make. If JHM can’t get the tune where I want it I’ll take it to a shop and have a dyno tune done. It should be around a whole second faster in the 1/4 mile.

@@badmaro304bro the biggest problem is the ZF6 the 6 speed auto, my B8 A4 being FBO IE stage 2 did 13.7s at 102mph in the 1/4 as best run, my B8.5 A4 ZF8 only stage 1 with a custom exhaust was doing 13.4s at 102mph in the 1/4 mile and that’s with a very lose waste gate on the K03, the gap is actually big between the 2

@@badmaro304also you don’t need upgraded injectors for a K04, I saw someone with the ZF6 auto and a K04 doing 0-60 in 4.9s and the 1/4 mile in the low 13s, tbh I would email JHM and maybe run a data log to see if everything it’s ok with your car

@@samwh4775 yeah I feel like the motor could handle a tune that was turned up a decent notch too. The k04 should be able to do a lot better. I expected it to be closer to high 12s low 13s

As far as I know they’re just factory S-Line wheels but that’s what the previous owner said

@@hotrodder5034 sounds like a fun setup! That’s almost identical to how my old car was setup so I know how that would feel 💯

Ohh yeah! It's a fun car to drive. I recently invested more money into it. New Kenwood Escelon radio, new window tint, got the AC fixed and the exhaust mount on the passenger side rear had broken.Going to order new Koni shocks next.

I just purchased a stock 95 camaro z28 a week ago, where should I look for mods? I've seen a few online but I havent been able to find a good amount of suppliers.

@@bigriles692 Tick Perfomance, Speed Engineering, Summit, JEGS, and EBay can all be your friend for finding mods for them.

@@bigriles692 Try Summit Racing. They sell a lot products for 4th Gen f-bodies.

@@Astro_mark couldn’t tell you if I “had to” because I already planned on doing it, I bought the car with snapped timing chains, I rebuilt it with all forged internals though. I believe you can get away with not having a built motor on this tune as it’s pretty conservative!

@@MrYummrz www.enthusiastbrand.com/products/audi-led-door-projector-puddle-lights?variant=42760238268657&currency=USD&gad_source=1&gbraid=0AAAAACLGkk7N6tf6K3nhMsQZSMn0G856k&gclid=Cj0KCQjwtsy1BhD7ARIsAHOi4xa-D7xg4L_4nlSotTP4FjflAAHvnIjSQ9dy_tHvck440ovwWD479o0aAv8KEALw_wcB

@@samwh4775 yeah y can’t really get it to stall up to launch any harder, it’s all it’s got. Its still kinda fun but I expected way more

@@badmaro304 this is my B8 with IE stage 2, I didn’t have the draggy back then but the 0-60 I timed it at around 5.4s ua-cam.com/users/shortsXA3wGb9Osd0?si=7b0JJvAl6NzjSkpJ

@@badmaro304also I found this video of someone with a K04 and the ZF6 on a B8, he seems to be doing 0-60 in 4.9s, he mentioned that he has a custom TCU, I guess is all on the TCU then ua-cam.com/video/0ZWnjpVPDgE/v-deo.htmlsi=bHdEMKpT_6H9fABm

@@paulflynn2481 I actually just sold that, I’ve got a nitrous kit for sale still

@@Kekoki143 100%

@@ALVINKFRM304 still got that baby power💯

@@Dwebb223 I do agree you need to be a little mechanically inclined for these cars but a lot of the common issues aren’t that bad of fixes.

@@badmaro304 the Lt1 is garbage you literally can't drive it in the rain . I have Vented MSD on drove it in the rain and it shit on me it's not practical for daily driving at all sick weekend cars tho

@@Dwebb223 I’ve actually replaced like 3 Optis on the car in 3 years so I’m finally just doing a 24x conversion. The lt1 itself has potential but the ignition system is 100% trash.

That’s a good question, I can’t answer that one for you but I’ll pin the comment so if anyone knows they can help!

Thanks​@@badmaro304

There’s a lot of options you can swap the car to for a relatively easy swap. Even if you swapped that car to the LT1 V8 that came as the factory option it wouldn’t be too terrible, but don’t spend the same money to swap it as if you could just buy one. Maybe saving for a V8 model would be easier, and then you have a better base to start with. You can still build the V6 cars too

@@badmaro304 Nice bro, quick with the response thank you. Saving for a V8 is gonna take quite a while seeing as i Still Got a year more of School and then possibly college or a sports career you never know so currently its only gonna be summer Jobs. V6s from what Ive seen are waay more affordable at the moment and i think the price for a swap wouldnt reach the current price of base V8 models...its Still a bit of road left ahead and i gotta think everything through well Thanks anyways i apreciate it

@@baki4341 absolutely, the most important part is to enjoy what you have while you have it. Make it yours👌🏻

@@badmaro304 I Will make sure that i do trust me...i fell in love with american muscle about a year ago and ever since i have been looking for one...that is ofcourse within a reasonable price range and seeing how expensive they are Here, a V6 might just be the best way to start one hell of a journey...thank you once more

It’s a 6421 part number, I’m actually selling the one I had on this car if you’re interested. It was only on for like a month and then I took it off because I am changing ecus

@@badmaro304so the 2 step can be used on an automatic????

@@dnegel9546 absolutely, you use it while foot braking essentially rather than holding a clutch. Just hook it up to a momentary switch

Just off of Amazon

I didn’t have a mic to record at the time

No I had already done all the suspension stuff before I really got into UA-cam. Most of the suspension stuff actually came off of my other Camaro I had prior to this one.

Motion Raceworks

I mean in reality it’s just the same thing with different panels. It’s not that deep😂

Yeah I had actually looked into that a little bit, the guy who sold the car said he had just replaced that but I feel like he lied about a lot of things he said he did.

There’s certain things from those cars that will tend to hold them back, the distributors are the worst part of the whole car. I haven’t had too much bad luck tbh, any time I do it’s ignition related tbh.

Thank you, I had just cleaned it and had the idea of the video, and then it rained and obviously being a daily the cleanliness didn’t make it very long. I should’ve rewashed it lol

The wheels are 17x9.5 all the way around with a 275 tire

@@badmaro304 nice when I get a catfish Camaro my wheels are going to be 18x9 or 8 .5

@@amari_videos_shorts that’ll look good, you could even go staggered if you wanted🤷🏻‍♂️

@@badmaro304 oh really I saw a skeleton shift knob that I want but it's going to be automatic catfish Camaro so hope it can fit

PASTEEE