Відео

Thank you. I didn't really notice the lights being a lot dimmer. But the wrap shops will tell you it does dim the lights.

I can't remember where I got it. Search Ebay. The headlights were tinted with a wrap.

Thanks....it doesn't seem as if Ebay has that exact grill any longer....I'll keep looking, it's difficult to find a Denali looking grill for a SLT Yukon....

Thanks....it doesn't seem as if Ebay has that exact grill any longer....I'll keep looking, it's difficult to find a Denali looking grill for a SLT Yukon....

I think this is where I got the grille. www.topgearautosport.com/175679/gmc-yukon-2015-2020-black-new-denali-style-grille?gad_source=1&gclid=CjwKCAiA75itBhA6EiwAkho9e-iO2FdV5SAYldJwFXD_4LCmOXUMLDpeuzD-jtHn6tttzOU9jRQHdRoCT1wQAvD_BwE @@kimwil2

Here it is on Ebay. Funny, the seller used a photo of my Denali without my permission to sell the grille. The grille I had at the time was the OEM which I plasti-coated. So it wasn't even the same grille in which they were selling. www.ebay.com/itm/283380032263?chn=ps @@kimwil2

I can't recall exactly, but you might want to use some adhesive.

Same here! I bought this exact grill and I cannot get the emblem to click back in.

ua-cam.com/users/clipUgkxJBBZngDm-ruJgPN_MgVfx4so77gVKbbq?si=TS87DPk29zqUctUA

I'm wondering the same thing!!!

I'm wondering the same thing!!!

A 400 watt inverter works for most uses. Laptop, scanner, printer (ink jet, not laser), monitor, phone charger, etc.

I made both myself. For the hood I used windshield wiper nozzles. Drilled out center and faced outward. I used 5mm red led lights for the lights in the hood and bumper. www.amazon.com/gp/product/B07RVNJHBN/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1 www.amazon.com/EDGELEC-LED-Lights-Emitting-Diodes/dp/B07T8H5D64/ref=sr_1_8?keywords=5mm%2Bred%2Bled&qid=1639331241&sr=8-8&th=1

I'm looking for the same online. can't find them like that. Not sure if they were purchased like that or if he modified/wrapped them...

It looks mean.

What kind of vehicle do you have?

I have a Ford F-250 truck I need a Mobil desk and I like the one you showed

Where can I buy one similar ?

@@gloriadubon1261 What Year is your F-250?. I make the desks. mobiledeskconcepts.com/

It's stock, with a matte black wrap, I bought some Mustang hood vents and dropped them in myself. www.lethalperformance.com/bmc-2013-2014-mustang-gt-oem-style-hood-vents.html

I had a car wrap place wrap them.

Ok thank you it looks damm good 👍

How much tint on headlights?

Yes. I painted it with black plastic dip. But I later bought one in gloss black for cheap. Shop around and you'll find good prices.

@@troypritchard4368 Appreciate you reply back. Thanks for the heads up. I see this black grille in Amazon, but not sure if it's good paint or not. You still have this Denali?

God'sNotDead 00 Yes. I still have the Denali. In the shop now problems with the supercharger caused serious upper engine problems. Don’t worry about the paint quality. Pretty much any grill you’ll get will be gloss black and is good quality.

@@troypritchard4368 Sorry to hear about the problem with the super charger. Hopefully, your get it fixed soon. Yeah... getting a Corsa exhaust and gloss black grille.

I had a wrap company install a tint.

Same here

There is one hole 3/16" drilled into the B Pillar. That's all that is needed.

Actually... I think I know why I can't get the clips to release, I think I took off the fog light screws (which of course there's 3 of them) instead of the 3 screws on the very side that hold the bumper to the bracket/brace that's right there in front of the tires. Well that's mixed news, those 3 screws were a PAIN IN THE A$$ to get off hopefully they go back on easier lol. Ohh boy. Well back at it in the am hopefully those 3 correct bumper screws to take off come off easier than those fog light ones. Doink.

Sorry to hear of the complications. I believe I mentioned later that the 3 bolts to access through the wheel well are not necessary to remove. Just give a good pull outward on the bumper away from the fender. (My post about a year ago: Correction. The three 7 mm bolts on both sides of the fender may not need to be removed. I later learned that you may be able to just pull the bumper forward, but you will still need to back out the 7 mm bolts on the wheel well that attach to the bumper.)

For the grill tabs I wonder if you need to pull up vs pushing down. Try that. Sorry.

@@troypritchard4368 idk what's needed but I ended up just breaking the shit out of the tabs on my old grille, I pushed them down I pushed them up from beneath, nothing worked. Finally they just basically shattered and came out lol. Luckily the new grille had its own so its all installed now. I couldn't even get the tabs on the new grille to snap in, but it's on there very good plenty of bolts holding that thing in place. And yah, I wish I would've caught that about the bolts in the wheel well because those were BY FAR the biggest pain in the ass for the entire project and took up probably half the time I spent on it. All good - new grill looks awesome, I went same as yours but chrome as I'm not blacking everything out. Mine has the new stock Denali 22" Inch rims I put on it as well, so it looks like a stock 2020 Denali now (its an SLT). Which is the look I am going for. I basically have a Denali look for $10K less.

@@troypritchard4368 Thx for the quick reply btw

CornPopWasABadDude this vid pretty straight forward I took mine off in about 20 min

@@GEDset58 yeah... It was good but the part where he says you need to take off 3 screws under the wheel well I think he even admitted wasn't necessary, unless that was another video I found, and that was by far the most time consuming portion for me. If it wasnt for those extremely hard to get to screws, I would've had mine done very quickly. That part held me up big time as I didn't have the exact wrench to use and I was literally twisting each one like a quarter turn at a time. Either way this video was extremely helpful I don't even think I could've got it done without it. New grill looks badass too. What a difference.

C. This is the original grill painted satin black. But I now have a gloss black grill and you can use the factory emblem on aftermarket grills.

Troy Pritchard ok cool because I grabbed the gloss black grill as well. I believe the factory emblem can just pop right out using the inside tabs.

You’ll probably need to glue the emblem on the grill. If I remember correctly the tabs do not catch.

James. It took w while but here's another vidoe. ua-cam.com/video/CRe5HY0xKy8/v-deo.html

Factory hood with matte black wrap and Mustang hood vents. Drilled two hole and installed windshield washer nozzles. Removed spray portion of the nozzle and install 3 mm LED red lights in place.

Joseph Arborea I’m thinking you don’t need to remove the whole bumper to swap the grill... seems like the 4 bolts and the 2 push down tabs

Yes. You need to remove the bumper, unlike the previous generations of Yukons.

Yeah I had to remove the whole thing to gain access to the screws holding the grill to the bumper.

@@troypritchard4368 ok I removed all the screws you said to do but the bumper is not moving

@@americano8092 I posted below: Correction. The three 7 mm bolts on both sides of the fender may not need to be removed. I later learned that you may be able to just pull the bumper forward, but you will still need to back out the 7 mm bolts on the wheel well that attach to the bumper.